Add yamllint action (#110)

.github/workflows/image-build-klipper.yaml

@@ -10,4 +10,4 @@ jobs:
       app: klipper
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-build-klipperscreen.yaml

@@ -10,4 +10,4 @@ jobs:
       app: klipperscreen
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-build-moonraker.yaml

@@ -10,4 +10,4 @@ jobs:
       app: moonraker
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-build-ustreamer.yaml

@@ -10,4 +10,4 @@ jobs:
       app: ustreamer
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-docs-klipper.yaml

@@ -15,4 +15,4 @@ jobs:
       short-description: "Klipper is a 3d-Printer firmware."
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-docs-klipperscreen.yaml

@@ -15,4 +15,4 @@ jobs:
       short-description: "KlipperScreen is a touchscreen GUI that interfaces with Klipper via Moonraker."
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-docs-moonraker.yaml

@@ -15,4 +15,4 @@ jobs:
       short-description: "Web API used to interact with the 3D printing firmware Klipper."
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/image-docs-ustreamer.yaml

@@ -15,4 +15,4 @@ jobs:
       short-description: "µStreamer is a lightweight and very quick server to stream MJPEG video"
     secrets:
       DOCKERHUB_USERNAME: ${{ secrets.DOCKERHUB_USERNAME }}
-      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}
+      DOCKERHUB_TOKEN: ${{ secrets.DOCKERHUB_TOKEN }}

.github/workflows/pr-yamllint.yaml

@@ -0,0 +1,11 @@
+name: YAML Lint
+
+on: pull_request
+
+jobs:
+  yamllint:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - name: Run yamllint
+        uses: reviewdog/action-yamllint@v1

.github/workflows/template-image-docs-workflow.yaml

@@ -20,13 +20,13 @@ jobs:
   image-docs:
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
-    - name: "Update Docker Hub Description"
-      uses: peter-evans/dockerhub-description@v3
-      with:
-        username: ${{ secrets.DOCKERHUB_USERNAME }}
-        password: ${{ secrets.DOCKERHUB_TOKEN }}
-        repository: ${{ secrets.DOCKERHUB_USERNAME }}/${{ inputs.app }}
-        short-description: ${{ inputs.short-description }} 
-        readme-filepath: ./docker/${{ inputs.app }}/README.md
-        enable-url-completion: true
+      - uses: actions/checkout@v4
+      - name: "Update Docker Hub Description"
+        uses: peter-evans/dockerhub-description@v3
+        with:
+          username: ${{ secrets.DOCKERHUB_USERNAME }}
+          password: ${{ secrets.DOCKERHUB_TOKEN }}
+          repository: ${{ secrets.DOCKERHUB_USERNAME }}/${{ inputs.app }}
+          short-description: ${{ inputs.short-description }}
+          readme-filepath: ./docker/${{ inputs.app }}/README.md
+          enable-url-completion: true

.yamllint.yaml

@@ -0,0 +1,9 @@
+extends: default
+
+rules:
+  document-start:
+    present: false
+  line-length:
+    max: 180
+  truthy:
+    check-keys: false

config/octoprint.yaml

@@ -1,10 +1,10 @@
 serial:
   additionalPorts:
-  - /opt/printer_data/run/klipper.tty
+    - /opt/printer_data/run/klipper.tty
   autoconnect: true
   port: /opt/printer_data/run/klipper.tty
 webcam:
   snapshot: http://webcam:8080/snapshot
   stream: /webcam/stream
 accessControl:
-  userfile: /octoprint/octoprint/users.yaml
+  userfile: /octoprint/octoprint/users.yaml

custom/docker-compose.custom.glances.override.yaml

@@ -12,14 +12,22 @@
 ## * https://github.com/nicolargo/glances is used to generate and display metrics
 ##
 ## Setup
-## 1. Add your personal config to this file and copy it to the root of the repository, overwriting the existing docker-compose.override.yaml
+## 1. Add your personal config to this file and copy it to the root of the repository,
+##    overwriting the existing docker-compose.override.yaml
 ## 2. start the stack as described in the main readme using profiles of your choice
 
 ## Ustreamer base Service
 x-ustreamer-svc: &ustreamer-svc
   image: mkuf/ustreamer:latest
   restart: unless-stopped
-  command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+  command: >
+    --host=0.0.0.0
+    --port=8080
+    --slowdown
+    --device=/dev/webcam
+    --resolution=1280x960
+    --format=MJPEG
+    --desired-fps=30
 
 ## Add your personal config here
 services:
@@ -54,4 +62,4 @@ services:
       traefik.http.routers.webcam.rule: PathPrefix(`/webcam`)
       traefik.http.routers.webcam.entrypoints: web
       traefik.http.middlewares.webcam.stripprefix.prefixes: /webcam
-      traefik.http.routers.webcam.middlewares: webcam
+      traefik.http.routers.webcam.middlewares: webcam

custom/docker-compose.custom.moonraker-timelapse.override.yaml

@@ -14,20 +14,29 @@
 ## * timelapses will be saved to `/opt/timelapse` on the host machine
 ##
 ## Setup
-## 1. Add the gcode macros provided by moonraker-timelapse to your printers configuration file https://github.com/mainsail-crew/moonraker-timelapse/blob/main/klipper_macro/timelapse.cfg
+## 1. Add the gcode macros provided by moonraker-timelapse to your printers configuration file
+##    https://github.com/mainsail-crew/moonraker-timelapse/blob/main/klipper_macro/timelapse.cfg
 ## 2. Add the following to your moonraker.conf
 ## ```
 ## [timelapse]
 ## output_path: /opt/timelapse/
 ## ```
-## 3. Add your personal config to this file and copy it to the root of the repository, overwriting the existing docker-compose.override.yaml
+## 3. Add your personal config to this file and copy it to the root of the repository,
+##    overwriting the existing docker-compose.override.yaml
 ## 4. start the stack as described in the main readme using mainsail or fluidd as profile
 
 ## Ustreamer base Service
 x-ustreamer-svc: &ustreamer-svc
   image: mkuf/ustreamer:latest
   restart: unless-stopped
-  command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+  command: >
+    --host=0.0.0.0
+    --port=8080
+    --slowdown
+    --device=/dev/webcam
+    --resolution=1280x960
+    --format=MJPEG
+    --desired-fps=30
 
 ## Add your personal config here
 services:
@@ -68,4 +77,4 @@ services:
       traefik.http.routers.webcam.rule: PathPrefix(`/webcam`)
       traefik.http.routers.webcam.entrypoints: web
       traefik.http.middlewares.webcam.stripprefix.prefixes: /webcam
-      traefik.http.routers.webcam.middlewares: webcam
+      traefik.http.routers.webcam.middlewares: webcam

custom/docker-compose.custom.multiple-printers.yaml

@@ -1,6 +1,6 @@
 ## Usecase: Run multiple Printers on the same Host
 ##
-## Assumptions: 
+## Assumptions:
 ## * I have two printers
 ## * One is called printer1, the other one printer2
 ## * printer1 is using serial port /dev/ttyUSB0 and webcam /dev/video0
@@ -55,7 +55,14 @@ x-moonraker-svc: &moonraker-svc
 x-ustreamer-svc: &ustreamer-svc
   image: mkuf/ustreamer:latest
   restart: unless-stopped
-  command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+  command: >
+    --host=0.0.0.0
+    --port=8080
+    --slowdown
+    --device=/dev/webcam
+    --resolution=1280x960
+    --format=MJPEG
+    --desired-fps=30
 
 ## Service Definitions
 services:
@@ -64,13 +71,20 @@ services:
   ## Access api via port 8101/tcp and webcam via 8102/tcp
   printer1-klipper:
     <<: *klipper-svc
-    command: -I printer_data/run/printer1.klipper.tty -a printer_data/run/printer1.klipper.sock printer_data/config/printer1.cfg -l printer_data/logs/printer1.klippy.log
+    command: >
+      -I printer_data/run/printer1.klipper.tty
+      -a printer_data/run/printer1.klipper.sock
+      printer_data/config/printer1.cfg
+      -l printer_data/logs/printer1.klippy.log
     labels:
       org.prind.service: klipper
       org.prind.printer: printer1
   printer1-moonraker:
     <<: *moonraker-svc
-    command: -d printer_data -c printer_data/config/printer1.moonraker.conf -l printer_data/logs/printer1.moonraker.log
+    command: >
+      -d printer_data
+      -c printer_data/config/printer1.moonraker.conf
+      -l printer_data/logs/printer1.moonraker.log
     ports:
       - 8101:7125
     labels:
@@ -90,13 +104,20 @@ services:
   ## Access api via port 8201/tcp and webcam via 8202/tcp
   printer2-klipper:
     <<: *klipper-svc
-    command: -I printer_data/run/printer2.klipper.tty -a printer_data/run/printer2.klipper.sock printer_data/config/printer2.cfg -l printer_data/logs/printer2.klippy.log
+    command: >
+      -I printer_data/run/printer2.klipper.tty
+      -a printer_data/run/printer2.klipper.sock
+      printer_data/config/printer2.cfg
+      -l printer_data/logs/printer2.klippy.log
     labels:
       org.prind.service: klipper
       org.prind.printer: printer2
   printer2-moonraker:
     <<: *moonraker-svc
-    command: -d printer_data -c printer_data/config/printer2.moonraker.conf -l printer_data/logs/printer2.moonraker.log
+    command: >
+      -d printer_data
+      -c printer_data/config/printer2.moonraker.conf
+      -l printer_data/logs/printer2.moonraker.log
     ports:
       - 8201:7125
     labels:
@@ -124,4 +145,4 @@ services:
 volumes:
   run:
   gcode:
-  log:
+  log:

custom/docker-compose.custom.portainer.yaml

@@ -29,7 +29,11 @@ services:
     depends_on:
       init:
         condition: service_completed_successfully
-    command: -I printer_data/run/klipper.tty -a printer_data/run/klipper.sock printer_data/config/printer.cfg -l printer_data/logs/klippy.log
+    command: >
+      -I printer_data/run/klipper.tty
+      -a printer_data/run/klipper.sock
+      printer_data/config/printer.cfg
+      -l printer_data/logs/klippy.log
     volumes:
       - /dev:/dev
       - ./config:/opt/printer_data/config
@@ -70,7 +74,14 @@ services:
   webcam:
     image: mkuf/ustreamer:latest
     restart: unless-stopped
-    command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+    command: >
+      --host=0.0.0.0
+      --port=8080
+      --slowdown
+      --device=/dev/webcam
+      --resolution=1280x960
+      --format=MJPEG
+      --desired-fps=30
     devices:
       - /dev/video0:/dev/webcam
     labels:
@@ -111,7 +122,7 @@ services:
       - "80:80"
     restart: unless-stopped
     volumes:
-        - "/var/run/docker.sock:/var/run/docker.sock:ro"
+      - "/var/run/docker.sock:/var/run/docker.sock:ro"
     labels:
       org.prind.service: traefik
 

custom/docker-compose.custom.unique-uid-gid.override.yaml

@@ -12,17 +12,25 @@
 ## * init container will set the permissions to the new UID/GID
 ##
 ## Setup
-## 1. Add your personal config to this file and copy it to the root of the repository, overwriting the existing docker-compose.override.yaml
-## 2. Replace the example UID and GID of '4242' in the 'dockerfile_inline' block of the klipper and moonraker services, 
+## 1. Add your personal config to this file and copy it to the root of the repository,
+##    overwriting the existing docker-compose.override.yaml
+## 2. Replace the example UID and GID of '4242' in the 'dockerfile_inline' block of the klipper and moonraker services,
 ##    as well as in the command of the init service with your specific requirements.
 ##    Make sure to use the identical UIDs/GIDs in klipper and moonraker.
-## 3. start the stack as described in the main readme using a profile of your choice. 
+## 3. start the stack as described in the main readme using a profile of your choice.
 
 ## Ustreamer base Service
 x-ustreamer-svc: &ustreamer-svc
   image: mkuf/ustreamer:latest
   restart: unless-stopped
-  command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+  command: >
+    --host=0.0.0.0
+    --port=8080
+    --slowdown
+    --device=/dev/webcam
+    --resolution=1280x960
+    --format=MJPEG
+    --desired-fps=30
 
 ## Add your personal config here
 services:
@@ -60,4 +68,4 @@ services:
       traefik.http.routers.webcam.rule: PathPrefix(`/webcam`)
       traefik.http.routers.webcam.entrypoints: web
       traefik.http.middlewares.webcam.stripprefix.prefixes: /webcam
-      traefik.http.routers.webcam.middlewares: webcam
+      traefik.http.routers.webcam.middlewares: webcam

docker-compose.extra.calibrate-shaper.yaml

@@ -4,4 +4,4 @@ services:
     entrypoint: python3 /opt/klipper/scripts/calibrate_shaper.py
     working_dir: /opt/resonances
     volumes:
-      - ./resonances:/opt/resonances
+      - ./resonances:/opt/resonances

docker-compose.extra.make.yaml

@@ -8,4 +8,4 @@ services:
     volumes:
       - /dev:/dev
       - ./config/build.config:/opt/klipper/.config
-      - ./out:/opt/klipper/out
+      - ./out:/opt/klipper/out

docker-compose.extra.simulavr.yaml

@@ -6,7 +6,7 @@ services:
     build:
       context: docker/klipper
       target: build-simulavr
-      args: 
+      args:
         VERSION: master
     privileged: true
     volumes:
@@ -14,7 +14,7 @@ services:
       - run:/opt/printer_data/run
     labels:
       org.prind.service: simulavr
-  
+
   ## Reconfigure Klipper service for simulavr
   klipper:
     depends_on:
@@ -22,4 +22,8 @@ services:
         condition: service_completed_successfully
       simulavr:
         condition: service_started
-    command: -I printer_data/run/klipper.tty -a printer_data/run/klipper.sock printer_data/config/printer-simulavr.cfg -l printer_data/logs/klippy.log
+    command: >
+      -I printer_data/run/klipper.tty
+      -a printer_data/run/klipper.sock
+      printer_data/config/printer-simulavr.cfg
+      -l printer_data/logs/klippy.log

docker-compose.override.yaml

@@ -2,7 +2,14 @@
 x-ustreamer-svc: &ustreamer-svc
   image: mkuf/ustreamer:latest
   restart: unless-stopped
-  command: --host=0.0.0.0 --port=8080 --slowdown --device=/dev/webcam --resolution=1280x960 --format=MJPEG --desired-fps=30
+  command: >
+    --host=0.0.0.0
+    --port=8080
+    --slowdown
+    --device=/dev/webcam
+    --resolution=1280x960
+    --format=MJPEG
+    --desired-fps=30
 
 ## Add your personal config here
 services:
@@ -17,4 +24,4 @@ services:
       traefik.http.routers.webcam.rule: PathPrefix(`/webcam`)
       traefik.http.routers.webcam.entrypoints: web
       traefik.http.middlewares.webcam.stripprefix.prefixes: /webcam
-      traefik.http.routers.webcam.middlewares: webcam
+      traefik.http.routers.webcam.middlewares: webcam

docker-compose.yaml

@@ -12,7 +12,11 @@ services:
     depends_on:
       init:
         condition: service_completed_successfully
-    command: -I printer_data/run/klipper.tty -a printer_data/run/klipper.sock printer_data/config/printer.cfg -l printer_data/logs/klippy.log
+    command: >
+      -I printer_data/run/klipper.tty
+      -a printer_data/run/klipper.sock
+      printer_data/config/printer.cfg
+      -l printer_data/logs/klippy.log
     volumes:
       - /dev:/dev
       - ./config:/opt/printer_data/config
@@ -196,7 +200,7 @@ services:
       - "80:80"
     restart: unless-stopped
     volumes:
-        - "/var/run/docker.sock:/var/run/docker.sock:ro"
+      - "/var/run/docker.sock:/var/run/docker.sock:ro"
     labels:
       org.prind.service: traefik