mirror of
https://github.com/Klipper3d/klipper.git
synced 2025-11-03 20:05:49 +01:00
a2482d4f95
M105 expects get_temp method. Module crashes when gcode_id parameter is set and M105 called. Add methods as hotfix. Signed-off-by: Robert Pazdzior <robertp@norbital.com>
190 lines
7.5 KiB
Python
190 lines
7.5 KiB
Python
# Z Thermal Adjust
|
|
#
|
|
# Copyright (C) 2022 Robert Pazdzior <robertp@norbital.com>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
|
|
# Adjusts Z position in real-time using a thermal probe to e.g. compensate
|
|
# for thermal expansion of the printer frame.
|
|
|
|
import threading
|
|
|
|
KELVIN_TO_CELSIUS = -273.15
|
|
|
|
class ZThermalAdjuster:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.gcode = self.printer.lookup_object('gcode')
|
|
self.lock = threading.Lock()
|
|
self.config = config
|
|
|
|
# Get config parameters, convert to SI units where necessary
|
|
self.temp_coeff = config.getfloat('temp_coeff', minval=-1, maxval=1,
|
|
default=0)
|
|
self.off_above_z = config.getfloat('z_adjust_off_above', 99999999.)
|
|
self.max_z_adjust_mm = config.getfloat('max_z_adjustment', 99999999.)
|
|
|
|
# Register printer events
|
|
self.printer.register_event_handler("klippy:connect",
|
|
self.handle_connect)
|
|
self.printer.register_event_handler("homing:home_rails_end",
|
|
self.handle_homing_move_end)
|
|
|
|
# Setup temperature sensor
|
|
self.smooth_time = config.getfloat('smooth_time', 2., above=0.)
|
|
self.inv_smooth_time = 1. / self.smooth_time
|
|
self.min_temp = config.getfloat('min_temp', minval=KELVIN_TO_CELSIUS)
|
|
self.max_temp = config.getfloat('max_temp', above=self.min_temp)
|
|
pheaters = self.printer.load_object(config, 'heaters')
|
|
self.sensor = pheaters.setup_sensor(config)
|
|
self.sensor.setup_minmax(self.min_temp, self.max_temp)
|
|
self.sensor.setup_callback(self.temperature_callback)
|
|
pheaters.register_sensor(config, self)
|
|
|
|
self.last_temp = 0.
|
|
self.measured_min = self.measured_max = 0.
|
|
self.smoothed_temp = 0.
|
|
self.last_temp_time = 0.
|
|
self.ref_temperature = 0.
|
|
self.ref_temp_override = False
|
|
|
|
# Z transformation
|
|
self.z_adjust_mm = 0.
|
|
self.last_z_adjust_mm = 0.
|
|
self.adjust_enable = True
|
|
self.last_position = [0., 0., 0., 0.]
|
|
self.next_transform = None
|
|
|
|
# Register gcode commands
|
|
self.gcode.register_command('SET_Z_THERMAL_ADJUST',
|
|
self.cmd_SET_Z_THERMAL_ADJUST,
|
|
desc=self.cmd_SET_Z_THERMAL_ADJUST_help)
|
|
|
|
def handle_connect(self):
|
|
'Called after all printer objects are instantiated'
|
|
self.toolhead = self.printer.lookup_object('toolhead')
|
|
gcode_move = self.printer.lookup_object('gcode_move')
|
|
|
|
# Register move transformation
|
|
self.next_transform = gcode_move.set_move_transform(self, force=True)
|
|
|
|
# Pull Z step distance for minimum adjustment increment
|
|
kin = self.printer.lookup_object('toolhead').get_kinematics()
|
|
steppers = [s.get_name() for s in kin.get_steppers()]
|
|
z_stepper = kin.get_steppers()[steppers.index("stepper_z")]
|
|
self.z_step_dist = z_stepper.get_step_dist()
|
|
|
|
def get_status(self, eventtime):
|
|
return {
|
|
'temperature': self.smoothed_temp,
|
|
'measured_min_temp': round(self.measured_min, 2),
|
|
'measured_max_temp': round(self.measured_max, 2),
|
|
'current_z_adjust': self.z_adjust_mm,
|
|
'z_adjust_ref_temperature': self.ref_temperature,
|
|
'enabled': self.adjust_enable
|
|
}
|
|
|
|
def handle_homing_move_end(self, homing_state, rails):
|
|
'Set reference temperature after Z homing.'
|
|
if 2 in homing_state.get_axes():
|
|
self.ref_temperature = self.smoothed_temp
|
|
self.ref_temp_override = False
|
|
self.z_adjust_mm = 0.
|
|
|
|
def calc_adjust(self, pos):
|
|
'Z adjustment calculation'
|
|
if pos[2] < self.off_above_z:
|
|
delta_t = self.smoothed_temp - self.ref_temperature
|
|
|
|
# Calculate Z adjustment
|
|
adjust = -1 * self.temp_coeff * delta_t
|
|
|
|
# compute sign (+1 or -1) for maximum offset setting
|
|
sign = 1 - (adjust <= 0)*2
|
|
|
|
# Don't apply adjustments smaller than step distance
|
|
if abs(adjust - self.z_adjust_mm) > self.z_step_dist:
|
|
self.z_adjust_mm = min([self.max_z_adjust_mm*sign,
|
|
adjust], key=abs)
|
|
|
|
# Apply Z adjustment
|
|
new_z = pos[2] + self.z_adjust_mm
|
|
self.last_z_adjust_mm = self.z_adjust_mm
|
|
return [pos[0], pos[1], new_z, pos[3]]
|
|
|
|
def calc_unadjust(self, pos):
|
|
'Remove Z adjustment'
|
|
unadjusted_z = pos[2] - self.z_adjust_mm
|
|
return [pos[0], pos[1], unadjusted_z, pos[3]]
|
|
|
|
def get_position(self):
|
|
position = self.calc_unadjust(self.next_transform.get_position())
|
|
self.last_position = self.calc_adjust(position)
|
|
return position
|
|
|
|
def move(self, newpos, speed):
|
|
# don't apply to extrude only moves or when disabled
|
|
if (newpos[0:2] == self.last_position[0:2]) or not self.adjust_enable:
|
|
z = newpos[2] + self.last_z_adjust_mm
|
|
adjusted_pos = [newpos[0], newpos[1], z, newpos[3]]
|
|
self.next_transform.move(adjusted_pos, speed)
|
|
else:
|
|
adjusted_pos = self.calc_adjust(newpos)
|
|
self.next_transform.move(adjusted_pos, speed)
|
|
self.last_position[:] = newpos
|
|
|
|
def temperature_callback(self, read_time, temp):
|
|
'Called everytime the Z adjust thermistor is read'
|
|
with self.lock:
|
|
time_diff = read_time - self.last_temp_time
|
|
self.last_temp = temp
|
|
self.last_temp_time = read_time
|
|
temp_diff = temp - self.smoothed_temp
|
|
adj_time = min(time_diff * self.inv_smooth_time, 1.)
|
|
self.smoothed_temp += temp_diff * adj_time
|
|
self.measured_min = min(self.measured_min, self.smoothed_temp)
|
|
self.measured_max = max(self.measured_max, self.smoothed_temp)
|
|
|
|
def get_temp(self, eventtime):
|
|
return self.smoothed_temp, 0.
|
|
|
|
def stats(self, eventtime):
|
|
return False, '%s: temp=%.1f' % ("z_thermal_adjust", self.smoothed_temp)
|
|
|
|
def cmd_SET_Z_THERMAL_ADJUST(self, gcmd):
|
|
enable = gcmd.get_int('ENABLE', None, minval=0, maxval=1)
|
|
coeff = gcmd.get_float('TEMP_COEFF', None, minval=-1, maxval=1)
|
|
ref_temp = gcmd.get_float('REF_TEMP', None, minval=KELVIN_TO_CELSIUS)
|
|
|
|
if ref_temp is not None:
|
|
self.ref_temperature = ref_temp
|
|
self.ref_temp_override = True
|
|
if coeff is not None:
|
|
self.temp_coeff = coeff
|
|
if enable is not None:
|
|
if enable != self.adjust_enable:
|
|
self.adjust_enable = True if enable else False
|
|
gcode_move = self.printer.lookup_object('gcode_move')
|
|
gcode_move.reset_last_position()
|
|
|
|
state = '1 (enabled)' if self.adjust_enable else '0 (disabled)'
|
|
override = ' (manual)' if self.ref_temp_override else ''
|
|
msg = ("enable: %s\n"
|
|
"temp_coeff: %f mm/degC\n"
|
|
"ref_temp: %.2f degC%s\n"
|
|
"-------------------\n"
|
|
"Current Z temp: %.2f degC\n"
|
|
"Applied Z adjustment: %.4f mm"
|
|
% (state,
|
|
self.temp_coeff,
|
|
self.ref_temperature, override,
|
|
self.smoothed_temp,
|
|
self.z_adjust_mm)
|
|
)
|
|
gcmd.respond_info(msg)
|
|
|
|
cmd_SET_Z_THERMAL_ADJUST_help = 'Set/query Z Thermal Adjust parameters.'
|
|
|
|
def load_config(config):
|
|
return ZThermalAdjuster(config)
|