mirror of
https://github.com/Klipper3d/klipper.git
synced 2025-10-31 10:25:57 +01:00
108 lines
3.3 KiB
Python
108 lines
3.3 KiB
Python
# Support for I2C based LM75/LM75A temperature sensors
|
|
#
|
|
# Copyright (C) 2020 Boleslaw Ciesielski <combolek@users.noreply.github.com>
|
|
#
|
|
# This file may be distributed under the terms of the GNU GPLv3 license.
|
|
import logging
|
|
from . import bus
|
|
|
|
LM75_CHIP_ADDR = 0x48
|
|
LM75_I2C_SPEED = 100000
|
|
LM75_REGS = {
|
|
'TEMP' : 0x00,
|
|
'CONF' : 0x01,
|
|
'THYST' : 0x02,
|
|
'TOS' : 0x03,
|
|
'PRODID' : 0x07 # TI LM75A chips only?
|
|
}
|
|
LM75_REPORT_TIME = .8
|
|
# Temperature can be sampled at any time but the read aborts
|
|
# the current conversion. Conversion time is 300ms so make
|
|
# sure not to read too often.
|
|
LM75_MIN_REPORT_TIME = .5
|
|
|
|
class LM75:
|
|
def __init__(self, config):
|
|
self.printer = config.get_printer()
|
|
self.name = config.get_name().split()[-1]
|
|
self.reactor = self.printer.get_reactor()
|
|
self.i2c = bus.MCU_I2C_from_config(
|
|
config,
|
|
default_addr=LM75_CHIP_ADDR,
|
|
default_speed=LM75_I2C_SPEED
|
|
)
|
|
self.mcu = self.i2c.get_mcu()
|
|
self.report_time = config.getint(
|
|
'lm75_report_time',
|
|
LM75_REPORT_TIME,
|
|
minval=LM75_MIN_REPORT_TIME
|
|
)
|
|
self.temp = 0.0
|
|
self.sample_timer = self.reactor.register_timer(self._sample_lm75)
|
|
self.printer.add_object("lm75 " + self.name, self)
|
|
self.printer.register_event_handler("klippy:ready", self.handle_ready)
|
|
|
|
def handle_ready(self):
|
|
self._init_lm75()
|
|
self.reactor.update_timer(self.sample_timer, self.reactor.NOW)
|
|
|
|
def setup_minmax(self, min_temp, max_temp):
|
|
pass
|
|
|
|
def setup_callback(self, cb):
|
|
self._callback = cb
|
|
|
|
def get_report_time_delta(self):
|
|
return self.report_time
|
|
|
|
def degrees_from_sample(self, x):
|
|
# The temp sample is encoded in the top 9 bits of a 16-bit
|
|
# value. Resolution is 0.5 degrees C.
|
|
return x[0] + (x[1] >> 7) * 0.5
|
|
|
|
def _init_lm75(self):
|
|
# Check and report the chip ID but ignore errors since many
|
|
# chips don't have it
|
|
try:
|
|
prodid = self.read_register('PRODID', 1)[0]
|
|
logging.info("lm75: Chip ID %#x" % prodid)
|
|
except:
|
|
pass
|
|
|
|
def _sample_lm75(self, eventtime):
|
|
try:
|
|
sample = self.read_register('TEMP', 2)
|
|
self.temp = self.degrees_from_sample(sample)
|
|
except Exception:
|
|
logging.exception("lm75: Error reading data")
|
|
self.temp = 0.0
|
|
return self.reactor.NEVER
|
|
|
|
measured_time = self.reactor.monotonic()
|
|
self._callback(self.mcu.estimated_print_time(measured_time), self.temp)
|
|
return measured_time + self.report_time
|
|
|
|
def read_register(self, reg_name, read_len):
|
|
# read a single register
|
|
regs = [LM75_REGS[reg_name]]
|
|
params = self.i2c.i2c_read(regs, read_len)
|
|
return bytearray(params['response'])
|
|
|
|
def write_register(self, reg_name, data):
|
|
if type(data) is not list:
|
|
data = [data]
|
|
reg = LM75_REGS[reg_name]
|
|
data.insert(0, reg)
|
|
self.i2c.i2c_write(data)
|
|
|
|
def get_status(self, eventtime):
|
|
return {
|
|
'temperature': self.temp,
|
|
}
|
|
|
|
|
|
def load_config(config):
|
|
# Register sensor
|
|
pheaters = config.get_printer().load_object(config, "heaters")
|
|
pheaters.add_sensor_factory("LM75", LM75)
|