Grigori Goronzy 75d5737211 Add STM32F103 port ...

Add a fully functional STM32F1 port, currently mostly targeting STM32F103
microcontrollers. This requires an 8 MHz XTAL. The maximum possible step rate
is around 282K steps per second.

This uses stm32flash to burn the firmware. The bootloader needs to be started
by setting BOOT0 to 1 and resetting the MCU. There is no automatic bootloader,
unlike on Arduino.

Signed-off-by: Grigori Goronzy <greg@kinoho.net>

2018-04-09 18:08:29 -04:00

38 KiB

Raw Blame History

View Raw