Druk-3D/prind
1
0
Fork 0
mirror of https://github.com/mkuf/prind.git synced 2025-10-26 07:46:19 +01:00
Code Issues Packages Projects Releases Wiki Activity

docs: remove note about host_mcu process from input shaper calibration section

Browse Source
This commit is contained in:
Markus Küffner
2023-06-17 12:58:47 +02:00
parent 0d4af22c50
commit f3cb018168
1 changed files with 3 additions and 4 deletions
Download Patch File Download Diff File Expand all files Collapse all files

7
README.md
View File

@@ -188,11 +188,10 @@ ACTION=="add",SUBSYSTEM=="tty",ATTRS{idVendor}=="0000",ATTRS{idProduct}=="0000",
```
### Input Shaper Calibration
Note:
>Running a host_mcu process on a RaspberryPi to access its GPIO pins is currently not possible when running in Docker.
Feel free to contribute if you have a Solution for this.
Using input shaper requires an accelerometer.
If you choose to connect this to your hosts GPIO pins, make sure to enable the `hostmcu` profile described in the `Additional Profiles` section above.
Using input shaper requires an accelerometer that is directly connected to your printers mainboard. Follow the Docs on [Measuring Resonances](https://www.klipper3d.org/Measuring_Resonances.html), to set up your Printer accordingly.
Follow the Docs on [Measuring Resonances](https://www.klipper3d.org/Measuring_Resonances.html), to set up your Printer.
After running `TEST_RESONANCES` or `SHAPER_CALIBRATE`, Klipper generates csv output in /tmp. To further analyze this data, it has to be extracted from the running klipper container.
```