mirror of
https://github.com/Klipper3d/klipper.git
synced 2025-10-31 18:36:09 +01:00
e278552d44
This is in preparation for merging the sam3 and sam4 code. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
159 lines
14 KiB
C
159 lines
14 KiB
C
/* ---------------------------------------------------------------------------- */
|
|
/* Atmel Microcontroller Software Support */
|
|
/* SAM Software Package License */
|
|
/* ---------------------------------------------------------------------------- */
|
|
/* Copyright (c) %copyright_year%, Atmel Corporation */
|
|
/* */
|
|
/* All rights reserved. */
|
|
/* */
|
|
/* Redistribution and use in source and binary forms, with or without */
|
|
/* modification, are permitted provided that the following condition is met: */
|
|
/* */
|
|
/* - Redistributions of source code must retain the above copyright notice, */
|
|
/* this list of conditions and the disclaimer below. */
|
|
/* */
|
|
/* Atmel's name may not be used to endorse or promote products derived from */
|
|
/* this software without specific prior written permission. */
|
|
/* */
|
|
/* DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR */
|
|
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
|
|
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE */
|
|
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, */
|
|
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
|
|
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, */
|
|
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF */
|
|
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING */
|
|
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
|
|
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */
|
|
/* ---------------------------------------------------------------------------- */
|
|
|
|
#ifndef _SAM4E_PIOA_INSTANCE_
|
|
#define _SAM4E_PIOA_INSTANCE_
|
|
|
|
/* ========== Register definition for PIOA peripheral ========== */
|
|
#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
|
|
#define REG_PIOA_PER (0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
|
|
#define REG_PIOA_PDR (0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
|
|
#define REG_PIOA_PSR (0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
|
|
#define REG_PIOA_OER (0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
|
|
#define REG_PIOA_ODR (0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
|
|
#define REG_PIOA_OSR (0x400E0E18U) /**< \brief (PIOA) Output Status Register */
|
|
#define REG_PIOA_IFER (0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
|
|
#define REG_PIOA_IFDR (0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
|
|
#define REG_PIOA_IFSR (0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
|
|
#define REG_PIOA_SODR (0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
|
|
#define REG_PIOA_CODR (0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
|
|
#define REG_PIOA_ODSR (0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
|
|
#define REG_PIOA_PDSR (0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
|
|
#define REG_PIOA_IER (0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
|
|
#define REG_PIOA_IDR (0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
|
|
#define REG_PIOA_IMR (0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
|
|
#define REG_PIOA_ISR (0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
|
|
#define REG_PIOA_MDER (0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
|
|
#define REG_PIOA_MDDR (0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
|
|
#define REG_PIOA_MDSR (0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
|
|
#define REG_PIOA_PUDR (0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
|
|
#define REG_PIOA_PUER (0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
|
|
#define REG_PIOA_PUSR (0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
|
|
#define REG_PIOA_ABCDSR (0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
|
|
#define REG_PIOA_IFSCDR (0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
|
|
#define REG_PIOA_IFSCER (0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
|
|
#define REG_PIOA_IFSCSR (0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
|
|
#define REG_PIOA_SCDR (0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
|
|
#define REG_PIOA_PPDDR (0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
|
|
#define REG_PIOA_PPDER (0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
|
|
#define REG_PIOA_PPDSR (0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
|
|
#define REG_PIOA_OWER (0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
|
|
#define REG_PIOA_OWDR (0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
|
|
#define REG_PIOA_OWSR (0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
|
|
#define REG_PIOA_AIMER (0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
|
|
#define REG_PIOA_AIMDR (0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
|
|
#define REG_PIOA_AIMMR (0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
|
|
#define REG_PIOA_ESR (0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
|
|
#define REG_PIOA_LSR (0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
|
|
#define REG_PIOA_ELSR (0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
|
|
#define REG_PIOA_FELLSR (0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
|
|
#define REG_PIOA_REHLSR (0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
|
|
#define REG_PIOA_FRLHSR (0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
|
|
#define REG_PIOA_LOCKSR (0x400E0EE0U) /**< \brief (PIOA) Lock Status */
|
|
#define REG_PIOA_WPMR (0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */
|
|
#define REG_PIOA_WPSR (0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */
|
|
#define REG_PIOA_SCHMITT (0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
|
|
#define REG_PIOA_DELAYR (0x400E0F10U) /**< \brief (PIOA) IO Delay Register */
|
|
#define REG_PIOA_PCMR (0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
|
|
#define REG_PIOA_PCIER (0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
|
|
#define REG_PIOA_PCIDR (0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
|
|
#define REG_PIOA_PCIMR (0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
|
|
#define REG_PIOA_PCISR (0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
|
|
#define REG_PIOA_PCRHR (0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
|
|
#define REG_PIOA_RPR (0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
|
|
#define REG_PIOA_RCR (0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
|
|
#define REG_PIOA_RNPR (0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
|
|
#define REG_PIOA_RNCR (0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
|
|
#define REG_PIOA_PTCR (0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
|
|
#define REG_PIOA_PTSR (0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
|
|
#else
|
|
#define REG_PIOA_PER (*(WoReg*)0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */
|
|
#define REG_PIOA_PDR (*(WoReg*)0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */
|
|
#define REG_PIOA_PSR (*(RoReg*)0x400E0E08U) /**< \brief (PIOA) PIO Status Register */
|
|
#define REG_PIOA_OER (*(WoReg*)0x400E0E10U) /**< \brief (PIOA) Output Enable Register */
|
|
#define REG_PIOA_ODR (*(WoReg*)0x400E0E14U) /**< \brief (PIOA) Output Disable Register */
|
|
#define REG_PIOA_OSR (*(RoReg*)0x400E0E18U) /**< \brief (PIOA) Output Status Register */
|
|
#define REG_PIOA_IFER (*(WoReg*)0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */
|
|
#define REG_PIOA_IFDR (*(WoReg*)0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */
|
|
#define REG_PIOA_IFSR (*(RoReg*)0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */
|
|
#define REG_PIOA_SODR (*(WoReg*)0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */
|
|
#define REG_PIOA_CODR (*(WoReg*)0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */
|
|
#define REG_PIOA_ODSR (*(RwReg*)0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */
|
|
#define REG_PIOA_PDSR (*(RoReg*)0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */
|
|
#define REG_PIOA_IER (*(WoReg*)0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */
|
|
#define REG_PIOA_IDR (*(WoReg*)0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */
|
|
#define REG_PIOA_IMR (*(RoReg*)0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */
|
|
#define REG_PIOA_ISR (*(RoReg*)0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */
|
|
#define REG_PIOA_MDER (*(WoReg*)0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */
|
|
#define REG_PIOA_MDDR (*(WoReg*)0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */
|
|
#define REG_PIOA_MDSR (*(RoReg*)0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */
|
|
#define REG_PIOA_PUDR (*(WoReg*)0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */
|
|
#define REG_PIOA_PUER (*(WoReg*)0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */
|
|
#define REG_PIOA_PUSR (*(RoReg*)0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */
|
|
#define REG_PIOA_ABCDSR (*(RwReg*)0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */
|
|
#define REG_PIOA_IFSCDR (*(WoReg*)0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */
|
|
#define REG_PIOA_IFSCER (*(WoReg*)0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */
|
|
#define REG_PIOA_IFSCSR (*(RoReg*)0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */
|
|
#define REG_PIOA_SCDR (*(RwReg*)0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */
|
|
#define REG_PIOA_PPDDR (*(WoReg*)0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */
|
|
#define REG_PIOA_PPDER (*(WoReg*)0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */
|
|
#define REG_PIOA_PPDSR (*(RoReg*)0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */
|
|
#define REG_PIOA_OWER (*(WoReg*)0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */
|
|
#define REG_PIOA_OWDR (*(WoReg*)0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */
|
|
#define REG_PIOA_OWSR (*(RoReg*)0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */
|
|
#define REG_PIOA_AIMER (*(WoReg*)0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */
|
|
#define REG_PIOA_AIMDR (*(WoReg*)0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */
|
|
#define REG_PIOA_AIMMR (*(RoReg*)0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */
|
|
#define REG_PIOA_ESR (*(WoReg*)0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */
|
|
#define REG_PIOA_LSR (*(WoReg*)0x400E0EC4U) /**< \brief (PIOA) Level Select Register */
|
|
#define REG_PIOA_ELSR (*(RoReg*)0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */
|
|
#define REG_PIOA_FELLSR (*(WoReg*)0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */
|
|
#define REG_PIOA_REHLSR (*(WoReg*)0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */
|
|
#define REG_PIOA_FRLHSR (*(RoReg*)0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */
|
|
#define REG_PIOA_LOCKSR (*(RoReg*)0x400E0EE0U) /**< \brief (PIOA) Lock Status */
|
|
#define REG_PIOA_WPMR (*(RwReg*)0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */
|
|
#define REG_PIOA_WPSR (*(RoReg*)0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */
|
|
#define REG_PIOA_SCHMITT (*(RwReg*)0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */
|
|
#define REG_PIOA_DELAYR (*(RwReg*)0x400E0F10U) /**< \brief (PIOA) IO Delay Register */
|
|
#define REG_PIOA_PCMR (*(RwReg*)0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */
|
|
#define REG_PIOA_PCIER (*(WoReg*)0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */
|
|
#define REG_PIOA_PCIDR (*(WoReg*)0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */
|
|
#define REG_PIOA_PCIMR (*(RoReg*)0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */
|
|
#define REG_PIOA_PCISR (*(RoReg*)0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */
|
|
#define REG_PIOA_PCRHR (*(RoReg*)0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */
|
|
#define REG_PIOA_RPR (*(RwReg*)0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */
|
|
#define REG_PIOA_RCR (*(RwReg*)0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */
|
|
#define REG_PIOA_RNPR (*(RwReg*)0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */
|
|
#define REG_PIOA_RNCR (*(RwReg*)0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */
|
|
#define REG_PIOA_PTCR (*(WoReg*)0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */
|
|
#define REG_PIOA_PTSR (*(RoReg*)0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */
|
|
#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
|
|
|
|
#endif /* _SAM4E_PIOA_INSTANCE_ */
|