klipper

mirror of https://github.com/Klipper3d/klipper.git synced 2025-11-12 08:16:04 +01:00

Files

Kevin O'Connor 0025fbf10d toolhead: Replace junction_deviation with square_corner_velocity

The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure.  Replace it with a
"square_corner_velocity" configuration parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

2018-07-16 10:32:43 -04:00

img

docs: Update documentation with iterative solver changes

2018-06-20 09:26:10 -04:00

prints

docs: Minor update to square.scad

2018-01-02 21:56:29 -05:00

beaglebone.md

pru: Disable ADC reading directly from the PRU

2018-06-27 12:10:25 -04:00

Code_Overview.md

docs: Add a section with micro-controller porting tips to Code_Overview.md

2018-07-11 14:40:39 -04:00

Config_checks.md

docs: Recommend running PID_CALIBRATE in Config_checks.md

2018-03-18 12:43:41 -04:00

Contact.md

docs: Expand on why it is important to provide the log in Contact.md

2018-07-08 20:30:35 -04:00

CONTRIBUTING.md

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

Debugging.md

docs: Update Debugging.md with information on logextract

2018-01-11 13:48:40 -05:00

developer-certificate-of-origin

docs: Add a CONTRIBUTING document

2017-12-24 12:33:01 -05:00

FAQ.md

toolhead: Replace junction_deviation with square_corner_velocity

2018-07-16 10:32:43 -04:00

Features.md

docs: Update main documentation to not Smoothieboard support

2018-07-08 11:01:54 -04:00

G-Codes.md

toolhead: Replace junction_deviation with square_corner_velocity

2018-07-16 10:32:43 -04:00

Installation.md

docs: Update main documentation to not Smoothieboard support

2018-07-08 11:01:54 -04:00

issue_template.md

docs: Add github issue template

2018-01-31 14:30:05 -05:00

Kinematics.md

docs: Update documentation with iterative solver changes

2018-06-20 09:26:10 -04:00

MCU_Commands.md

basecmd: Rename get_status to get_clock

2018-05-29 10:57:29 -04:00

Overview.md

docs: Add a G-Codes.md file with the list of available commands

2018-03-08 14:11:20 -05:00

Pressure_Advance.md

docs: Note pressure_advance over 0.20 is unlikely to improve quality

2018-01-08 11:07:26 -05:00

Protocol.md

docs: Use only single space at start of new sentence

2017-05-01 11:58:32 -04:00

README.md

docs: Improve documentation for those starting in docs/

2017-04-27 16:05:26 -04:00

Releases.md

docs: Update release notes for v0.6.0 release

2018-03-31 14:04:39 -04:00

stm32f1.md

stm32f1: add SPI support

2018-07-07 11:05:33 -04:00

Todo.md

docs: Remove lpc176x item from Todo

2018-05-25 13:56:54 -04:00

README.md

Welcome to the Klipper documentation. The overview document is a good starting point.