Druk-3D/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-10-26 07:46:11 +01:00
Code Issues Packages Projects Releases Wiki Activity

gcode_button: Add support for analog buttons

Browse Source 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2020-09-09 14:16:42 -04:00
parent 13ee6032ae
commit fc85675145
2 changed files with 19 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
config/example-extras.cfg
View File

@@ -1330,6 +1330,14 @@
#pin:
# The pin on which the button is connected. This parameter must be
# provided.
#analog_range:
# Two comma separated resistances (in Ohms) specifying the minimum
# and maximum resistance range for the button. If analog_range is
# provided then the pin must be an analog capable pin. The default
# is to use digital gpio for the button.
#analog_pullup_resistor:
# The pullup resistance (in Ohms) when analog_range is specified.
# The default is 4700 ohms.
#press_gcode:
# A list of G-Code commands to execute when the button is pressed.
# G-Code templates are supported. This parameter must be provided.