config: Change of alias for heater_fan in multiple configs (#5632)

This PR serves to fix a longstanding misnomer in some config files. Many configs state a nozzle_cooling_fan alias for what is usually a "hotend cooling fan". This causes ambiguity and confusion with the parts fan. I have identified all 24 files with this and changed them here. Signed-off-by: James Hartley <james@hartleyns.com>
2025-10-31 10:25:57 +01:00 · 2022-07-19 18:02:51 +01:00
parent 6be114d728
commit dd03cca49b
24 changed files with 24 additions and 24 deletions
--- a/config/generic-archim2.cfg
+++ b/config/generic-archim2.cfg
@@ -129,7 +129,7 @@ max_temp: 130
 [fan]
 pin: PC26

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PC25

 [mcu]
--- a/config/generic-bigtreetech-e3-rrf-v1.1.cfg
+++ b/config/generic-bigtreetech-e3-rrf-v1.1.cfg
@@ -90,7 +90,7 @@ pid_Kd: 948.182
 min_temp: 0
 max_temp: 130

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PB6

 [fan]
--- a/config/generic-bigtreetech-skr-e3-turbo.cfg
+++ b/config/generic-bigtreetech-skr-e3-turbo.cfg
@@ -105,7 +105,7 @@ max_temp: 130
 [fan]
 pin: P2.1

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: P2.2

 [mcu]
--- a/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
+++ b/config/generic-bigtreetech-skr-mini-e3-v2.0.cfg
@@ -100,7 +100,7 @@ pid_Kd: 948.182
 min_temp: 0
 max_temp: 130

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PC7

 [fan]
--- a/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg
+++ b/config/generic-bigtreetech-skr-mini-e3-v3.0.cfg
@@ -98,7 +98,7 @@ pid_Kd: 948.182
 min_temp: 0
 max_temp: 130

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PC7

 [heater_fan controller_fan]
--- a/config/generic-bigtreetech-skr-mini-mz.cfg
+++ b/config/generic-bigtreetech-skr-mini-mz.cfg
@@ -103,7 +103,7 @@ pid_Kd: 948.182
 min_temp: 0
 max_temp: 130

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PC7

 [fan]
--- a/config/generic-bigtreetech-skr-pico-v1.0.cfg
+++ b/config/generic-bigtreetech-skr-pico-v1.0.cfg
@@ -100,7 +100,7 @@ max_temp: 130
 [fan]
 pin: gpio17

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: gpio18

 [heater_fan controller_fan]
--- a/config/generic-duet2-duex.cfg
+++ b/config/generic-duet2-duex.cfg
@@ -288,7 +288,7 @@ max_temp: 130
 pin: PC23

 # Fan1 controlled by extruder
-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PC26
 heater: extruder
 heater_temp: 45
--- a/config/generic-duet2-maestro.cfg
+++ b/config/generic-duet2-maestro.cfg
@@ -123,7 +123,7 @@ max_temp: 130
 [fan]
 pin: PC23  # FAN0

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PC22  # FAN1

 #[heater_fan board_cooling_fan]
--- a/config/generic-duet2.cfg
+++ b/config/generic-duet2.cfg
@@ -101,7 +101,7 @@ max_temp: 130
 [fan]
 pin: PC23  # FAN0

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PC26  # FAN1

 #[heater_fan board_cooling_fan]
--- a/config/generic-einsy-rambo.cfg
+++ b/config/generic-einsy-rambo.cfg
@@ -95,7 +95,7 @@ max_temp: 130
 [fan]
 pin: PH5

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PH3

 [temperature_sensor board_sensor]
--- a/config/generic-fysetc-cheetah-v1.2.cfg
+++ b/config/generic-fysetc-cheetah-v1.2.cfg
@@ -97,7 +97,7 @@ max_temp: 130
 [fan]
 pin: PC8

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PB0

 [mcu]
--- a/config/generic-mini-rambo.cfg
+++ b/config/generic-mini-rambo.cfg
@@ -65,7 +65,7 @@ max_temp: 130
 [fan]
 pin: PH5

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PH3

 [mcu]
--- a/config/generic-printrboard-g2.cfg
+++ b/config/generic-printrboard-g2.cfg
@@ -104,7 +104,7 @@ max_temp: 290
 [fan]
 pin: PB27

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PA6

 [mcu]
--- a/config/generic-radds.cfg
+++ b/config/generic-radds.cfg
@@ -81,7 +81,7 @@ max_temp: 130
 [fan]
 pin: PC21

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PC22

 [mcu]
--- a/config/generic-rambo.cfg
+++ b/config/generic-rambo.cfg
@@ -75,7 +75,7 @@ max_temp: 130
 [fan]
 pin: PH5

-#[heater_fan nozzle_cooling_fan]
+#[heater_fan heatbreak_cooling_fan]
 #pin: PH3

 [mcu]
--- a/config/printer-eryone-er20-2021.cfg
+++ b/config/printer-eryone-er20-2021.cfg
@@ -112,7 +112,7 @@ max_temp: 100
 [fan]
 pin: PB5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PB4

 [mcu]
--- a/config/printer-eryone-thinker-series-v2-2020.cfg
+++ b/config/printer-eryone-thinker-series-v2-2020.cfg
@@ -67,7 +67,7 @@ max_extrude_only_distance: 300
 [fan]
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PH3

 [heater_bed]
--- a/config/printer-lulzbot-mini1-2016.cfg
+++ b/config/printer-lulzbot-mini1-2016.cfg
@@ -114,7 +114,7 @@ max_temp: 130
 #define FAN_PIN             8
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 #define FAN1_PIN            6
 pin: PH3

--- a/config/printer-lulzbot-taz6-2017.cfg
+++ b/config/printer-lulzbot-taz6-2017.cfg
@@ -97,7 +97,7 @@ max_temp: 130
 [fan]
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PH3

 [mcu]
--- a/config/printer-lulzbot-taz6-dual-v3-2017.cfg
+++ b/config/printer-lulzbot-taz6-dual-v3-2017.cfg
@@ -128,7 +128,7 @@ max_temp: 130
 #On Dual v3 heat break fan is connected to PH3 (part cooling fan on single extruder)
 pin: PH3

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 #On Dual v3 part fans are connected to PH5 (heat break fan on single extruder)
 pin: PH5

--- a/config/printer-makergear-m2-2016.cfg
+++ b/config/printer-makergear-m2-2016.cfg
@@ -70,7 +70,7 @@ max_temp: 90
 [fan]
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PH3

 [mcu]
--- a/config/printer-mtw-create-2015.cfg
+++ b/config/printer-mtw-create-2015.cfg
@@ -104,7 +104,7 @@ mesh_max: 225, 225
 [fan]
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PH3

 [mcu]
--- a/config/printer-seemecnc-rostock-max-v2-2015.cfg
+++ b/config/printer-seemecnc-rostock-max-v2-2015.cfg
@@ -63,7 +63,7 @@ max_temp: 300
 [fan]
 pin: PH5

-[heater_fan nozzle_cooling_fan]
+[heater_fan heatbreak_cooling_fan]
 pin: PH4
 heater: extruder