Druk-3D/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-11-01 19:05:56 +01:00
Code Issues Packages Projects Releases Wiki Activity

bme280: Add BMP388 sensor support to BMxx80 (#6576)

Browse Source 
Extends the BMxx80 category with support for the BMP388 sensor,
providing temperature and pressure output similar to the existing BMxx80 class of sensors.

Signed-off-by: 林玮 (Jade Lin) <linw1995@icloud.com>
This commit is contained in:
林玮 (Jade Lin)
2024-04-25 09:45:05 +08:00
committed by GitHub
parent 2f6e94c94c
commit c3ec4af6cc
2 changed files with 155 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
docs/Config_Reference.md
View File

@@ -2490,9 +2490,9 @@ sensor_pin:
# name in the above list.
```
### BMP180/BMP280/BME280/BME680 temperature sensor
### BMP180/BMP280/BME280/BMP388/BME680 temperature sensor
BMP180/BMP280/BME280/BME680 two wire interface (I2C) environmental sensors.
BMP180/BMP280/BME280/BMP388/BME680 two wire interface (I2C) environmental sensors.
Note that these sensors are not intended for use with extruders and
heater beds, but rather for monitoring ambient temperature (C),
pressure (hPa), relative humidity and in case of the BME680 gas level.
@@ -2503,8 +2503,8 @@ temperature.
```
sensor_type: BME280
#i2c_address:
# Default is 118 (0x76). The BMP180 and some BME280 sensors have an address of 119
# (0x77).
# Default is 118 (0x76). The BMP180, BMP388 and some BME280 sensors
# have an address of 119 (0x77).
#i2c_mcu:
#i2c_bus:
#i2c_software_scl_pin: