Druk-3D/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-11-18 03:00:54 +01:00
Code Issues Packages Projects Releases Wiki Activity

extruder: Add SET_PRESSURE_ADVANCE command.

Browse Source 
Signed-off-by: Michael Barbour <barbour.michael.0@gmail.com>
This commit is contained in:
Michael Barbour
2018-04-01 15:26:25 -04:00
committed by KevinOConnor
parent bee179eab4
commit a301713361
2 changed files with 25 additions and 5 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
docs/G-Codes.md
View File

@@ -71,6 +71,9 @@ The following standard commands are supported:
cycles. If the WRITE_FILE parameter is enabled, then the file
/tmp/heattest.txt will be created with a log of all temperature
samples taken during the test.
- `SET_PRESSURE_ADVANCE [ADVANCE=<pressure_advance>]
[ADVANCE_LOOKAHEAD_TIME=<pressure_advance_lookahead_time>]`:
Set pressure advance parameters.
- `RESTART`: This will cause the host software to reload its config
and perform an internal reset. This command will not clear error
state from the micro-controller (see FIRMWARE_RESTART) nor will it