stm32: Initial support for stm32f2 (#3001)

Initial support for stm32f2 in general and STM32F207 in particular.

Boots up and communicates on STM32F207VC.

Signed-off-by: Boleslaw Ciesielski <combolek@users.noreply.github.com>

lib/stm32f2/include/stm32f2xx.h

@@ -0,0 +1,191 @@
+/**
+  ******************************************************************************
+  * @file    stm32f2xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS STM32F2xx Device Peripheral Access Layer Header File. 
+  *
+  *          The file is the unique include file that the application programmer
+  *          is using in the C source code, usually in main.c. This file contains:
+  *           - Configuration section that allows to select:
+  *              - The STM32F2xx device used in the target application
+  *              - To use or not the peripheral<61>s drivers in application code(i.e. 
+  *                code will be based on direct access to peripheral<61>s registers 
+  *                rather than drivers API), this option is controlled by 
+  *                "#define USE_HAL_DRIVER"
+  *  
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f2xx
+  * @{
+  */
+    
+#ifndef __STM32F2xx_H
+#define __STM32F2xx_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif /* __cplusplus */
+   
+/** @addtogroup Library_configuration_section
+  * @{
+  */
+
+/**
+  * @brief STM32 Family
+  */
+#if !defined (STM32F2)
+#define STM32F2
+#endif /* STM32F2 */
+   
+/* Uncomment the line below according to the target STM32 device used in your
+   application 
+  */
+#if !defined (STM32F205xx) && !defined (STM32F215xx) && !defined (STM32F207xx) && !defined (STM32F217xx)
+
+  /* #define STM32F205xx */   /*!< STM32F205RG, STM32F205VG, STM32F205ZG, STM32F205RF, STM32F205VF, STM32F205ZF,
+                                   STM32F205RE, STM32F205VE, STM32F205ZE, STM32F205RC, STM32F205VC, STM32F205ZC,
+                                   STM32F205RB and STM32F205VB Devices */
+  /* #define STM32F215xx */   /*!< STM32F215RG, STM32F215VG, STM32F215ZG, STM32F215RE, STM32F215VE and STM32F215ZE Devices */
+  /* #define STM32F207xx */   /*!< STM32F207VG, STM32F207ZG, STM32F207IG, STM32F207VF, STM32F207ZF, STM32F207IF,
+                                   STM32F207VE, STM32F207ZE, STM32F207IE, STM32F207VC, STM32F207ZC and STM32F207IC Devices */
+  /* #define STM32F217xx */   /*!< STM32F217VG, STM32F217ZG, STM32F217IG, STM32F217VE, STM32F217ZE and STM32F217IE Devices */
+    
+#endif
+   
+/*  Tip: To avoid modifying this file each time you need to switch between these
+        devices, you can define the device in your toolchain compiler preprocessor.
+  */
+#if !defined  (USE_HAL_DRIVER)
+/**
+ * @brief Comment the line below if you will not use the peripherals drivers.
+   In this case, these drivers will not be included and the application code will 
+   be based on direct access to peripherals registers 
+   */
+  /*#define USE_HAL_DRIVER */
+#endif /* USE_HAL_DRIVER */
+
+/**
+  * @brief CMSIS Device version number V2.2.3
+  */
+#define __STM32F2xx_CMSIS_VERSION_MAIN   (0x02U) /*!< [31:24] main version */
+#define __STM32F2xx_CMSIS_VERSION_SUB1   (0x02U) /*!< [23:16] sub1 version */
+#define __STM32F2xx_CMSIS_VERSION_SUB2   (0x03U) /*!< [15:8]  sub2 version */
+#define __STM32F2xx_CMSIS_VERSION_RC     (0x00U) /*!< [7:0]  release candidate */
+#define __STM32F2xx_CMSIS_VERSION        ((__STM32F2xx_CMSIS_VERSION_MAIN << 24)\
+                                         |(__STM32F2xx_CMSIS_VERSION_SUB1 << 16)\
+                                         |(__STM32F2xx_CMSIS_VERSION_SUB2 << 8 )\
+                                         |(__STM32F2xx_CMSIS_VERSION))
+
+/**
+  * @}
+  */
+
+/** @addtogroup Device_Included
+  * @{
+  */
+
+#if defined(STM32F205xx)
+  #include "stm32f205xx.h"
+#elif defined(STM32F215xx)
+  #include "stm32f215xx.h"
+#elif defined(STM32F207xx)
+  #include "stm32f207xx.h"
+#elif defined(STM32F217xx)
+  #include "stm32f217xx.h"
+#else
+ #error "Please select first the target STM32F2xx device used in your application (in stm32f2xx.h file)"
+#endif
+
+/**
+  * @}
+  */
+
+/** @addtogroup Exported_types
+  * @{
+  */ 
+typedef enum 
+{
+  RESET = 0U, 
+  SET = !RESET
+} FlagStatus, ITStatus;
+
+typedef enum 
+{
+  DISABLE = 0U, 
+  ENABLE = !DISABLE
+} FunctionalState;
+#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
+
+typedef enum 
+{
+  SUCCESS = 0U,
+  ERROR = !SUCCESS
+} ErrorStatus;
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup Exported_macro
+  * @{
+  */
+#define SET_BIT(REG, BIT)     ((REG) |= (BIT))
+
+#define CLEAR_BIT(REG, BIT)   ((REG) &= ~(BIT))
+
+#define READ_BIT(REG, BIT)    ((REG) & (BIT))
+
+#define CLEAR_REG(REG)        ((REG) = (0x0))
+
+#define WRITE_REG(REG, VAL)   ((REG) = (VAL))
+
+#define READ_REG(REG)         ((REG))
+
+#define MODIFY_REG(REG, CLEARMASK, SETMASK)  WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
+
+#define POSITION_VAL(VAL)     (__CLZ(__RBIT(VAL))) 
+
+
+/**
+  * @}
+  */
+  
+#if defined (USE_HAL_DRIVER)
+ #include "stm32f2xx_hal.h"
+#endif /* USE_HAL_DRIVER */
+
+#ifdef __cplusplus
+}
+#endif /* __cplusplus */
+
+#endif /* __STM32F2xx_H */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/stm32f2/include/system_stm32f2xx.h

@@ -0,0 +1,106 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f2xx.h
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device System Source File for STM32F2xx devices.
+  ****************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f2xx_system
+  * @{
+  */  
+  
+/**
+  * @brief Define to prevent recursive inclusion
+  */
+#ifndef __SYSTEM_STM32F2XX_H
+#define __SYSTEM_STM32F2XX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/** @addtogroup STM32F2xx_System_Includes
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+
+/** @addtogroup STM32F2xx_System_Exported_types
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetSysClockFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+extern uint32_t SystemCoreClock;          /*!< System Clock Frequency (Core Clock) */
+
+extern const uint8_t  AHBPrescTable[16];    /*!< AHB prescalers table values */
+extern const uint8_t  APBPrescTable[8];     /*!< APB prescalers table values */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Exported_Constants
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Exported_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Exported_Functions
+  * @{
+  */
+  
+extern void SystemInit(void);
+extern void SystemCoreClockUpdate(void);
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /*__SYSTEM_STM32F2XX_H */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

lib/stm32f2/system_stm32f2xx.c

@@ -0,0 +1,346 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f2xx.c
+  * @author  MCD Application Team
+  * @brief   CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
+  *             
+  *   This file provides two functions and one global variable to be called from 
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and 
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f2xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick 
+  *                                  timer or configure other parameters.
+  *                                     
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f2xx_system
+  * @{
+  */  
+  
+/** @addtogroup STM32F2xx_System_Private_Includes
+  * @{
+  */
+
+#include "stm32f2xx.h"
+
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_Defines
+  * @{
+  */
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM mounted
+     on STM322xG_EVAL board as data memory  */
+/* #define DATA_IN_ExtSRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field. 
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_Variables
+  * @{
+  */
+  
+  /* This variable can be updated in Three ways :
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency 
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 16000000;
+  const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+  const uint8_t APBPrescTable[8]  = {0, 0, 0, 0, 1, 2, 3, 4};
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#ifdef DATA_IN_ExtSRAM
+  static void SystemInit_ExtMemCtl(void); 
+#endif /* DATA_IN_ExtSRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F2xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the Embedded Flash Interface, the PLL and update the 
+  *         SystemFrequency variable.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#ifdef DATA_IN_ExtSRAM
+  SystemInit_ExtMemCtl(); 
+#endif /* DATA_IN_ExtSRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+  * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *           
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.         
+  *     
+  * @note   - The system frequency computed by this function is not the real 
+  *           frequency in the chip. It is calculated based on the predefined 
+  *           constant and the selected clock source:
+  *             
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *                                              
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *                          
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) 
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *         
+  *         (*) HSI_VALUE is a constant defined in stm32f2xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.   
+  *    
+  *         (**) HSE_VALUE is a constant defined in stm32f2xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *                
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *     
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+  
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */    
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+      
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#ifdef DATA_IN_ExtSRAM
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f2xx.s before jump to main.
+  *         This function configures the external SRAM mounted on STM322xG_EVAL board
+  *         This SRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+  (void)(tmp);
+
+  /* Connect PDx pins to FSMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */  
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */  
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */  
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */ 
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FSMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */ 
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */ 
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */  
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */ 
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FSMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */   
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */ 
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */  
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */ 
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FSMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */ 
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */ 
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */  
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */ 
+  GPIOG->PUPDR   = 0x00000000;
+  
+/*--FSMC Configuration -------------------------------------------------------*/
+  /* Enable the FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+}
+#endif /* DATA_IN_ExtSRAM */
+
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/