Druk-3D/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-11-04 20:36:00 +01:00
Code Issues Packages Projects Releases Wiki Activity

sensor_ldc1612: Add support for chips with INTB line routed to mcu

Browse Source 
If the INTB line is available it can reduce the MCU load.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
2024-05-03 11:17:28 -04:00
parent cb6cce3934
commit 04c562941c
3 changed files with 52 additions and 10 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
docs/Config_Reference.md
View File

@@ -2007,6 +2007,9 @@ Support for eddy current inductive probes. One may define this section
sensor_type: ldc1612
# The sensor chip used to perform eddy current measurements. This
# parameter must be provided and must be set to ldc1612.
#intb_pin:
# MCU gpio pin connected to the ldc1612 sensor's INTB pin (if
# available). The default is to not use the INTB pin.
#z_offset:
# The nominal distance (in mm) between the nozzle and bed that a
# probing attempt should stop at. This parameter must be provided.