Druk-3D/klipper
1
0
Fork 0
mirror of https://github.com/Klipper3d/klipper.git synced 2025-10-31 10:25:57 +01:00
Code Issues Packages Projects Releases Wiki Activity
Files
cb15d0fec69317ed2023dd8aad19f749f527fe77
klipper/lib/same54/include/component/usb.h

1778 lines
136 KiB
C
Raw Normal View History

lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 16:26:47 -05:00
/**
* \file
*
* \brief Component description for USB
*
lib: Add atmel same51 and same54 build definitions This also replaces the samd51 component files with the definitions from the same54 repository. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-29 12:17:20 -04:00
* Copyright (c) 2019 Microchip Technology Inc.
lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 16:26:47 -05:00
*
* \asf_license_start
*
* \page License
*
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may
* not use this file except in compliance with the License.
* You may obtain a copy of the Licence at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
* \asf_license_stop
*
*/
lib: Add atmel same51 and same54 build definitions This also replaces the samd51 component files with the definitions from the same54 repository. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-29 12:17:20 -04:00
#ifndef _SAME54_USB_COMPONENT_
#define _SAME54_USB_COMPONENT_
lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 16:26:47 -05:00
/* ========================================================================== */
/** SOFTWARE API DEFINITION FOR USB */
/* ========================================================================== */
lib: Add atmel same51 and same54 build definitions This also replaces the samd51 component files with the definitions from the same54 repository. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-29 12:17:20 -04:00
/** \addtogroup SAME54_USB Universal Serial Bus */
lib: Add Atmel SAMD51 cmsis files Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2019-01-14 16:26:47 -05:00
/*@{*/
#define USB_U2222
#define REV_USB 0x120
/* -------- USB_CTRLA : (USB Offset: 0x000) (R/W 8) Control A -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t SWRST:1; /*!< bit: 0 Software Reset */
uint8_t ENABLE:1; /*!< bit: 1 Enable */
uint8_t RUNSTDBY:1; /*!< bit: 2 Run in Standby Mode */
uint8_t :4; /*!< bit: 3.. 6 Reserved */
uint8_t MODE:1; /*!< bit: 7 Operating Mode */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_CTRLA_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_CTRLA_OFFSET 0x000 /**< \brief (USB_CTRLA offset) Control A */
#define USB_CTRLA_RESETVALUE _U_(0x00) /**< \brief (USB_CTRLA reset_value) Control A */
#define USB_CTRLA_SWRST_Pos 0 /**< \brief (USB_CTRLA) Software Reset */
#define USB_CTRLA_SWRST (_U_(0x1) << USB_CTRLA_SWRST_Pos)
#define USB_CTRLA_ENABLE_Pos 1 /**< \brief (USB_CTRLA) Enable */
#define USB_CTRLA_ENABLE (_U_(0x1) << USB_CTRLA_ENABLE_Pos)
#define USB_CTRLA_RUNSTDBY_Pos 2 /**< \brief (USB_CTRLA) Run in Standby Mode */
#define USB_CTRLA_RUNSTDBY (_U_(0x1) << USB_CTRLA_RUNSTDBY_Pos)
#define USB_CTRLA_MODE_Pos 7 /**< \brief (USB_CTRLA) Operating Mode */
#define USB_CTRLA_MODE (_U_(0x1) << USB_CTRLA_MODE_Pos)
#define USB_CTRLA_MODE_DEVICE_Val _U_(0x0) /**< \brief (USB_CTRLA) Device Mode */
#define USB_CTRLA_MODE_HOST_Val _U_(0x1) /**< \brief (USB_CTRLA) Host Mode */
#define USB_CTRLA_MODE_DEVICE (USB_CTRLA_MODE_DEVICE_Val << USB_CTRLA_MODE_Pos)
#define USB_CTRLA_MODE_HOST (USB_CTRLA_MODE_HOST_Val << USB_CTRLA_MODE_Pos)
#define USB_CTRLA_MASK _U_(0x87) /**< \brief (USB_CTRLA) MASK Register */
/* -------- USB_SYNCBUSY : (USB Offset: 0x002) (R/ 8) Synchronization Busy -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t SWRST:1; /*!< bit: 0 Software Reset Synchronization Busy */
uint8_t ENABLE:1; /*!< bit: 1 Enable Synchronization Busy */
uint8_t :6; /*!< bit: 2.. 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_SYNCBUSY_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_SYNCBUSY_OFFSET 0x002 /**< \brief (USB_SYNCBUSY offset) Synchronization Busy */
#define USB_SYNCBUSY_RESETVALUE _U_(0x00) /**< \brief (USB_SYNCBUSY reset_value) Synchronization Busy */
#define USB_SYNCBUSY_SWRST_Pos 0 /**< \brief (USB_SYNCBUSY) Software Reset Synchronization Busy */
#define USB_SYNCBUSY_SWRST (_U_(0x1) << USB_SYNCBUSY_SWRST_Pos)
#define USB_SYNCBUSY_ENABLE_Pos 1 /**< \brief (USB_SYNCBUSY) Enable Synchronization Busy */
#define USB_SYNCBUSY_ENABLE (_U_(0x1) << USB_SYNCBUSY_ENABLE_Pos)
#define USB_SYNCBUSY_MASK _U_(0x03) /**< \brief (USB_SYNCBUSY) MASK Register */
/* -------- USB_QOSCTRL : (USB Offset: 0x003) (R/W 8) USB Quality Of Service -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t CQOS:2; /*!< bit: 0.. 1 Configuration Quality of Service */
uint8_t DQOS:2; /*!< bit: 2.. 3 Data Quality of Service */
uint8_t :4; /*!< bit: 4.. 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_QOSCTRL_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_QOSCTRL_OFFSET 0x003 /**< \brief (USB_QOSCTRL offset) USB Quality Of Service */
#define USB_QOSCTRL_RESETVALUE _U_(0x0F) /**< \brief (USB_QOSCTRL reset_value) USB Quality Of Service */
#define USB_QOSCTRL_CQOS_Pos 0 /**< \brief (USB_QOSCTRL) Configuration Quality of Service */
#define USB_QOSCTRL_CQOS_Msk (_U_(0x3) << USB_QOSCTRL_CQOS_Pos)
#define USB_QOSCTRL_CQOS(value) (USB_QOSCTRL_CQOS_Msk & ((value) << USB_QOSCTRL_CQOS_Pos))
#define USB_QOSCTRL_DQOS_Pos 2 /**< \brief (USB_QOSCTRL) Data Quality of Service */
#define USB_QOSCTRL_DQOS_Msk (_U_(0x3) << USB_QOSCTRL_DQOS_Pos)
#define USB_QOSCTRL_DQOS(value) (USB_QOSCTRL_DQOS_Msk & ((value) << USB_QOSCTRL_DQOS_Pos))
#define USB_QOSCTRL_MASK _U_(0x0F) /**< \brief (USB_QOSCTRL) MASK Register */
/* -------- USB_DEVICE_CTRLB : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE Control B -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t DETACH:1; /*!< bit: 0 Detach */
uint16_t UPRSM:1; /*!< bit: 1 Upstream Resume */
uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration */
uint16_t NREPLY:1; /*!< bit: 4 No Reply */
uint16_t TSTJ:1; /*!< bit: 5 Test mode J */
uint16_t TSTK:1; /*!< bit: 6 Test mode K */
uint16_t TSTPCKT:1; /*!< bit: 7 Test packet mode */
uint16_t OPMODE2:1; /*!< bit: 8 Specific Operational Mode */
uint16_t GNAK:1; /*!< bit: 9 Global NAK */
uint16_t LPMHDSK:2; /*!< bit: 10..11 Link Power Management Handshake */
uint16_t :4; /*!< bit: 12..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_CTRLB_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_CTRLB_OFFSET 0x008 /**< \brief (USB_DEVICE_CTRLB offset) DEVICE Control B */
#define USB_DEVICE_CTRLB_RESETVALUE _U_(0x0001) /**< \brief (USB_DEVICE_CTRLB reset_value) DEVICE Control B */
#define USB_DEVICE_CTRLB_DETACH_Pos 0 /**< \brief (USB_DEVICE_CTRLB) Detach */
#define USB_DEVICE_CTRLB_DETACH (_U_(0x1) << USB_DEVICE_CTRLB_DETACH_Pos)
#define USB_DEVICE_CTRLB_UPRSM_Pos 1 /**< \brief (USB_DEVICE_CTRLB) Upstream Resume */
#define USB_DEVICE_CTRLB_UPRSM (_U_(0x1) << USB_DEVICE_CTRLB_UPRSM_Pos)
#define USB_DEVICE_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_DEVICE_CTRLB) Speed Configuration */
#define USB_DEVICE_CTRLB_SPDCONF_Msk (_U_(0x3) << USB_DEVICE_CTRLB_SPDCONF_Pos)
#define USB_DEVICE_CTRLB_SPDCONF(value) (USB_DEVICE_CTRLB_SPDCONF_Msk & ((value) << USB_DEVICE_CTRLB_SPDCONF_Pos))
#define USB_DEVICE_CTRLB_SPDCONF_FS_Val _U_(0x0) /**< \brief (USB_DEVICE_CTRLB) FS : Full Speed */
#define USB_DEVICE_CTRLB_SPDCONF_LS_Val _U_(0x1) /**< \brief (USB_DEVICE_CTRLB) LS : Low Speed */
#define USB_DEVICE_CTRLB_SPDCONF_HS_Val _U_(0x2) /**< \brief (USB_DEVICE_CTRLB) HS : High Speed capable */
#define USB_DEVICE_CTRLB_SPDCONF_HSTM_Val _U_(0x3) /**< \brief (USB_DEVICE_CTRLB) HSTM: High Speed Test Mode (force high-speed mode for test mode) */
#define USB_DEVICE_CTRLB_SPDCONF_FS (USB_DEVICE_CTRLB_SPDCONF_FS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
#define USB_DEVICE_CTRLB_SPDCONF_LS (USB_DEVICE_CTRLB_SPDCONF_LS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
#define USB_DEVICE_CTRLB_SPDCONF_HS (USB_DEVICE_CTRLB_SPDCONF_HS_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
#define USB_DEVICE_CTRLB_SPDCONF_HSTM (USB_DEVICE_CTRLB_SPDCONF_HSTM_Val << USB_DEVICE_CTRLB_SPDCONF_Pos)
#define USB_DEVICE_CTRLB_NREPLY_Pos 4 /**< \brief (USB_DEVICE_CTRLB) No Reply */
#define USB_DEVICE_CTRLB_NREPLY (_U_(0x1) << USB_DEVICE_CTRLB_NREPLY_Pos)
#define USB_DEVICE_CTRLB_TSTJ_Pos 5 /**< \brief (USB_DEVICE_CTRLB) Test mode J */
#define USB_DEVICE_CTRLB_TSTJ (_U_(0x1) << USB_DEVICE_CTRLB_TSTJ_Pos)
#define USB_DEVICE_CTRLB_TSTK_Pos 6 /**< \brief (USB_DEVICE_CTRLB) Test mode K */
#define USB_DEVICE_CTRLB_TSTK (_U_(0x1) << USB_DEVICE_CTRLB_TSTK_Pos)
#define USB_DEVICE_CTRLB_TSTPCKT_Pos 7 /**< \brief (USB_DEVICE_CTRLB) Test packet mode */
#define USB_DEVICE_CTRLB_TSTPCKT (_U_(0x1) << USB_DEVICE_CTRLB_TSTPCKT_Pos)
#define USB_DEVICE_CTRLB_OPMODE2_Pos 8 /**< \brief (USB_DEVICE_CTRLB) Specific Operational Mode */
#define USB_DEVICE_CTRLB_OPMODE2 (_U_(0x1) << USB_DEVICE_CTRLB_OPMODE2_Pos)
#define USB_DEVICE_CTRLB_GNAK_Pos 9 /**< \brief (USB_DEVICE_CTRLB) Global NAK */
#define USB_DEVICE_CTRLB_GNAK (_U_(0x1) << USB_DEVICE_CTRLB_GNAK_Pos)
#define USB_DEVICE_CTRLB_LPMHDSK_Pos 10 /**< \brief (USB_DEVICE_CTRLB) Link Power Management Handshake */
#define USB_DEVICE_CTRLB_LPMHDSK_Msk (_U_(0x3) << USB_DEVICE_CTRLB_LPMHDSK_Pos)
#define USB_DEVICE_CTRLB_LPMHDSK(value) (USB_DEVICE_CTRLB_LPMHDSK_Msk & ((value) << USB_DEVICE_CTRLB_LPMHDSK_Pos))
#define USB_DEVICE_CTRLB_LPMHDSK_NO_Val _U_(0x0) /**< \brief (USB_DEVICE_CTRLB) No handshake. LPM is not supported */
#define USB_DEVICE_CTRLB_LPMHDSK_ACK_Val _U_(0x1) /**< \brief (USB_DEVICE_CTRLB) ACK */
#define USB_DEVICE_CTRLB_LPMHDSK_NYET_Val _U_(0x2) /**< \brief (USB_DEVICE_CTRLB) NYET */
#define USB_DEVICE_CTRLB_LPMHDSK_STALL_Val _U_(0x3) /**< \brief (USB_DEVICE_CTRLB) STALL */
#define USB_DEVICE_CTRLB_LPMHDSK_NO (USB_DEVICE_CTRLB_LPMHDSK_NO_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
#define USB_DEVICE_CTRLB_LPMHDSK_ACK (USB_DEVICE_CTRLB_LPMHDSK_ACK_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
#define USB_DEVICE_CTRLB_LPMHDSK_NYET (USB_DEVICE_CTRLB_LPMHDSK_NYET_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
#define USB_DEVICE_CTRLB_LPMHDSK_STALL (USB_DEVICE_CTRLB_LPMHDSK_STALL_Val << USB_DEVICE_CTRLB_LPMHDSK_Pos)
#define USB_DEVICE_CTRLB_MASK _U_(0x0FFF) /**< \brief (USB_DEVICE_CTRLB) MASK Register */
/* -------- USB_HOST_CTRLB : (USB Offset: 0x008) (R/W 16) HOST HOST Control B -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t :1; /*!< bit: 0 Reserved */
uint16_t RESUME:1; /*!< bit: 1 Send USB Resume */
uint16_t SPDCONF:2; /*!< bit: 2.. 3 Speed Configuration for Host */
uint16_t AUTORESUME:1; /*!< bit: 4 Auto Resume Enable */
uint16_t TSTJ:1; /*!< bit: 5 Test mode J */
uint16_t TSTK:1; /*!< bit: 6 Test mode K */
uint16_t :1; /*!< bit: 7 Reserved */
uint16_t SOFE:1; /*!< bit: 8 Start of Frame Generation Enable */
uint16_t BUSRESET:1; /*!< bit: 9 Send USB Reset */
uint16_t VBUSOK:1; /*!< bit: 10 VBUS is OK */
uint16_t L1RESUME:1; /*!< bit: 11 Send L1 Resume */
uint16_t :4; /*!< bit: 12..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_CTRLB_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_CTRLB_OFFSET 0x008 /**< \brief (USB_HOST_CTRLB offset) HOST Control B */
#define USB_HOST_CTRLB_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_CTRLB reset_value) HOST Control B */
#define USB_HOST_CTRLB_RESUME_Pos 1 /**< \brief (USB_HOST_CTRLB) Send USB Resume */
#define USB_HOST_CTRLB_RESUME (_U_(0x1) << USB_HOST_CTRLB_RESUME_Pos)
#define USB_HOST_CTRLB_SPDCONF_Pos 2 /**< \brief (USB_HOST_CTRLB) Speed Configuration for Host */
#define USB_HOST_CTRLB_SPDCONF_Msk (_U_(0x3) << USB_HOST_CTRLB_SPDCONF_Pos)
#define USB_HOST_CTRLB_SPDCONF(value) (USB_HOST_CTRLB_SPDCONF_Msk & ((value) << USB_HOST_CTRLB_SPDCONF_Pos))
#define USB_HOST_CTRLB_SPDCONF_NORMAL_Val _U_(0x0) /**< \brief (USB_HOST_CTRLB) Normal mode: the host starts in full-speed mode and performs a high-speed reset to switch to the high speed mode if the downstream peripheral is high-speed capable. */
#define USB_HOST_CTRLB_SPDCONF_FS_Val _U_(0x3) /**< \brief (USB_HOST_CTRLB) Full-speed: the host remains in full-speed mode whatever is the peripheral speed capability. Relevant in UTMI mode only. */
#define USB_HOST_CTRLB_SPDCONF_NORMAL (USB_HOST_CTRLB_SPDCONF_NORMAL_Val << USB_HOST_CTRLB_SPDCONF_Pos)
#define USB_HOST_CTRLB_SPDCONF_FS (USB_HOST_CTRLB_SPDCONF_FS_Val << USB_HOST_CTRLB_SPDCONF_Pos)
#define USB_HOST_CTRLB_AUTORESUME_Pos 4 /**< \brief (USB_HOST_CTRLB) Auto Resume Enable */
#define USB_HOST_CTRLB_AUTORESUME (_U_(0x1) << USB_HOST_CTRLB_AUTORESUME_Pos)
#define USB_HOST_CTRLB_TSTJ_Pos 5 /**< \brief (USB_HOST_CTRLB) Test mode J */
#define USB_HOST_CTRLB_TSTJ (_U_(0x1) << USB_HOST_CTRLB_TSTJ_Pos)
#define USB_HOST_CTRLB_TSTK_Pos 6 /**< \brief (USB_HOST_CTRLB) Test mode K */
#define USB_HOST_CTRLB_TSTK (_U_(0x1) << USB_HOST_CTRLB_TSTK_Pos)
#define USB_HOST_CTRLB_SOFE_Pos 8 /**< \brief (USB_HOST_CTRLB) Start of Frame Generation Enable */
#define USB_HOST_CTRLB_SOFE (_U_(0x1) << USB_HOST_CTRLB_SOFE_Pos)
#define USB_HOST_CTRLB_BUSRESET_Pos 9 /**< \brief (USB_HOST_CTRLB) Send USB Reset */
#define USB_HOST_CTRLB_BUSRESET (_U_(0x1) << USB_HOST_CTRLB_BUSRESET_Pos)
#define USB_HOST_CTRLB_VBUSOK_Pos 10 /**< \brief (USB_HOST_CTRLB) VBUS is OK */
#define USB_HOST_CTRLB_VBUSOK (_U_(0x1) << USB_HOST_CTRLB_VBUSOK_Pos)
#define USB_HOST_CTRLB_L1RESUME_Pos 11 /**< \brief (USB_HOST_CTRLB) Send L1 Resume */
#define USB_HOST_CTRLB_L1RESUME (_U_(0x1) << USB_HOST_CTRLB_L1RESUME_Pos)
#define USB_HOST_CTRLB_MASK _U_(0x0F7E) /**< \brief (USB_HOST_CTRLB) MASK Register */
/* -------- USB_DEVICE_DADD : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE Device Address -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DADD:7; /*!< bit: 0.. 6 Device Address */
uint8_t ADDEN:1; /*!< bit: 7 Device Address Enable */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_DADD_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_DADD_OFFSET 0x00A /**< \brief (USB_DEVICE_DADD offset) DEVICE Device Address */
#define USB_DEVICE_DADD_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_DADD reset_value) DEVICE Device Address */
#define USB_DEVICE_DADD_DADD_Pos 0 /**< \brief (USB_DEVICE_DADD) Device Address */
#define USB_DEVICE_DADD_DADD_Msk (_U_(0x7F) << USB_DEVICE_DADD_DADD_Pos)
#define USB_DEVICE_DADD_DADD(value) (USB_DEVICE_DADD_DADD_Msk & ((value) << USB_DEVICE_DADD_DADD_Pos))
#define USB_DEVICE_DADD_ADDEN_Pos 7 /**< \brief (USB_DEVICE_DADD) Device Address Enable */
#define USB_DEVICE_DADD_ADDEN (_U_(0x1) << USB_DEVICE_DADD_ADDEN_Pos)
#define USB_DEVICE_DADD_MASK _U_(0xFF) /**< \brief (USB_DEVICE_DADD) MASK Register */
/* -------- USB_HOST_HSOFC : (USB Offset: 0x00A) (R/W 8) HOST HOST Host Start Of Frame Control -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t FLENC:4; /*!< bit: 0.. 3 Frame Length Control */
uint8_t :3; /*!< bit: 4.. 6 Reserved */
uint8_t FLENCE:1; /*!< bit: 7 Frame Length Control Enable */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_HSOFC_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_HSOFC_OFFSET 0x00A /**< \brief (USB_HOST_HSOFC offset) HOST Host Start Of Frame Control */
#define USB_HOST_HSOFC_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_HSOFC reset_value) HOST Host Start Of Frame Control */
#define USB_HOST_HSOFC_FLENC_Pos 0 /**< \brief (USB_HOST_HSOFC) Frame Length Control */
#define USB_HOST_HSOFC_FLENC_Msk (_U_(0xF) << USB_HOST_HSOFC_FLENC_Pos)
#define USB_HOST_HSOFC_FLENC(value) (USB_HOST_HSOFC_FLENC_Msk & ((value) << USB_HOST_HSOFC_FLENC_Pos))
#define USB_HOST_HSOFC_FLENCE_Pos 7 /**< \brief (USB_HOST_HSOFC) Frame Length Control Enable */
#define USB_HOST_HSOFC_FLENCE (_U_(0x1) << USB_HOST_HSOFC_FLENCE_Pos)
#define USB_HOST_HSOFC_MASK _U_(0x8F) /**< \brief (USB_HOST_HSOFC) MASK Register */
/* -------- USB_DEVICE_STATUS : (USB Offset: 0x00C) (R/ 8) DEVICE DEVICE Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t :2; /*!< bit: 0.. 1 Reserved */
uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */
uint8_t :2; /*!< bit: 4.. 5 Reserved */
uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_STATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_STATUS_OFFSET 0x00C /**< \brief (USB_DEVICE_STATUS offset) DEVICE Status */
#define USB_DEVICE_STATUS_RESETVALUE _U_(0x40) /**< \brief (USB_DEVICE_STATUS reset_value) DEVICE Status */
#define USB_DEVICE_STATUS_SPEED_Pos 2 /**< \brief (USB_DEVICE_STATUS) Speed Status */
#define USB_DEVICE_STATUS_SPEED_Msk (_U_(0x3) << USB_DEVICE_STATUS_SPEED_Pos)
#define USB_DEVICE_STATUS_SPEED(value) (USB_DEVICE_STATUS_SPEED_Msk & ((value) << USB_DEVICE_STATUS_SPEED_Pos))
#define USB_DEVICE_STATUS_SPEED_FS_Val _U_(0x0) /**< \brief (USB_DEVICE_STATUS) Full-speed mode */
#define USB_DEVICE_STATUS_SPEED_LS_Val _U_(0x1) /**< \brief (USB_DEVICE_STATUS) Low-speed mode */
#define USB_DEVICE_STATUS_SPEED_HS_Val _U_(0x2) /**< \brief (USB_DEVICE_STATUS) High-speed mode */
#define USB_DEVICE_STATUS_SPEED_FS (USB_DEVICE_STATUS_SPEED_FS_Val << USB_DEVICE_STATUS_SPEED_Pos)
#define USB_DEVICE_STATUS_SPEED_LS (USB_DEVICE_STATUS_SPEED_LS_Val << USB_DEVICE_STATUS_SPEED_Pos)
#define USB_DEVICE_STATUS_SPEED_HS (USB_DEVICE_STATUS_SPEED_HS_Val << USB_DEVICE_STATUS_SPEED_Pos)
#define USB_DEVICE_STATUS_LINESTATE_Pos 6 /**< \brief (USB_DEVICE_STATUS) USB Line State Status */
#define USB_DEVICE_STATUS_LINESTATE_Msk (_U_(0x3) << USB_DEVICE_STATUS_LINESTATE_Pos)
#define USB_DEVICE_STATUS_LINESTATE(value) (USB_DEVICE_STATUS_LINESTATE_Msk & ((value) << USB_DEVICE_STATUS_LINESTATE_Pos))
#define USB_DEVICE_STATUS_LINESTATE_0_Val _U_(0x0) /**< \brief (USB_DEVICE_STATUS) SE0/RESET */
#define USB_DEVICE_STATUS_LINESTATE_1_Val _U_(0x1) /**< \brief (USB_DEVICE_STATUS) FS-J or LS-K State */
#define USB_DEVICE_STATUS_LINESTATE_2_Val _U_(0x2) /**< \brief (USB_DEVICE_STATUS) FS-K or LS-J State */
#define USB_DEVICE_STATUS_LINESTATE_0 (USB_DEVICE_STATUS_LINESTATE_0_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
#define USB_DEVICE_STATUS_LINESTATE_1 (USB_DEVICE_STATUS_LINESTATE_1_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
#define USB_DEVICE_STATUS_LINESTATE_2 (USB_DEVICE_STATUS_LINESTATE_2_Val << USB_DEVICE_STATUS_LINESTATE_Pos)
#define USB_DEVICE_STATUS_MASK _U_(0xCC) /**< \brief (USB_DEVICE_STATUS) MASK Register */
/* -------- USB_HOST_STATUS : (USB Offset: 0x00C) (R/W 8) HOST HOST Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t :2; /*!< bit: 0.. 1 Reserved */
uint8_t SPEED:2; /*!< bit: 2.. 3 Speed Status */
uint8_t :2; /*!< bit: 4.. 5 Reserved */
uint8_t LINESTATE:2; /*!< bit: 6.. 7 USB Line State Status */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_STATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_STATUS_OFFSET 0x00C /**< \brief (USB_HOST_STATUS offset) HOST Status */
#define USB_HOST_STATUS_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_STATUS reset_value) HOST Status */
#define USB_HOST_STATUS_SPEED_Pos 2 /**< \brief (USB_HOST_STATUS) Speed Status */
#define USB_HOST_STATUS_SPEED_Msk (_U_(0x3) << USB_HOST_STATUS_SPEED_Pos)
#define USB_HOST_STATUS_SPEED(value) (USB_HOST_STATUS_SPEED_Msk & ((value) << USB_HOST_STATUS_SPEED_Pos))
#define USB_HOST_STATUS_LINESTATE_Pos 6 /**< \brief (USB_HOST_STATUS) USB Line State Status */
#define USB_HOST_STATUS_LINESTATE_Msk (_U_(0x3) << USB_HOST_STATUS_LINESTATE_Pos)
#define USB_HOST_STATUS_LINESTATE(value) (USB_HOST_STATUS_LINESTATE_Msk & ((value) << USB_HOST_STATUS_LINESTATE_Pos))
#define USB_HOST_STATUS_MASK _U_(0xCC) /**< \brief (USB_HOST_STATUS) MASK Register */
/* -------- USB_FSMSTATUS : (USB Offset: 0x00D) (R/ 8) Finite State Machine Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t FSMSTATE:7; /*!< bit: 0.. 6 Fine State Machine Status */
uint8_t :1; /*!< bit: 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_FSMSTATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_FSMSTATUS_OFFSET 0x00D /**< \brief (USB_FSMSTATUS offset) Finite State Machine Status */
#define USB_FSMSTATUS_RESETVALUE _U_(0x01) /**< \brief (USB_FSMSTATUS reset_value) Finite State Machine Status */
#define USB_FSMSTATUS_FSMSTATE_Pos 0 /**< \brief (USB_FSMSTATUS) Fine State Machine Status */
#define USB_FSMSTATUS_FSMSTATE_Msk (_U_(0x7F) << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE(value) (USB_FSMSTATUS_FSMSTATE_Msk & ((value) << USB_FSMSTATUS_FSMSTATE_Pos))
#define USB_FSMSTATUS_FSMSTATE_OFF_Val _U_(0x1) /**< \brief (USB_FSMSTATUS) OFF (L3). It corresponds to the powered-off, disconnected, and disabled state */
#define USB_FSMSTATUS_FSMSTATE_ON_Val _U_(0x2) /**< \brief (USB_FSMSTATUS) ON (L0). It corresponds to the Idle and Active states */
#define USB_FSMSTATUS_FSMSTATE_SUSPEND_Val _U_(0x4) /**< \brief (USB_FSMSTATUS) SUSPEND (L2) */
#define USB_FSMSTATUS_FSMSTATE_SLEEP_Val _U_(0x8) /**< \brief (USB_FSMSTATUS) SLEEP (L1) */
#define USB_FSMSTATUS_FSMSTATE_DNRESUME_Val _U_(0x10) /**< \brief (USB_FSMSTATUS) DNRESUME. Down Stream Resume. */
#define USB_FSMSTATUS_FSMSTATE_UPRESUME_Val _U_(0x20) /**< \brief (USB_FSMSTATUS) UPRESUME. Up Stream Resume. */
#define USB_FSMSTATUS_FSMSTATE_RESET_Val _U_(0x40) /**< \brief (USB_FSMSTATUS) RESET. USB lines Reset. */
#define USB_FSMSTATUS_FSMSTATE_OFF (USB_FSMSTATUS_FSMSTATE_OFF_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_ON (USB_FSMSTATUS_FSMSTATE_ON_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_SUSPEND (USB_FSMSTATUS_FSMSTATE_SUSPEND_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_SLEEP (USB_FSMSTATUS_FSMSTATE_SLEEP_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_DNRESUME (USB_FSMSTATUS_FSMSTATE_DNRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_UPRESUME (USB_FSMSTATUS_FSMSTATE_UPRESUME_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_FSMSTATE_RESET (USB_FSMSTATUS_FSMSTATE_RESET_Val << USB_FSMSTATUS_FSMSTATE_Pos)
#define USB_FSMSTATUS_MASK _U_(0x7F) /**< \brief (USB_FSMSTATUS) MASK Register */
/* -------- USB_DEVICE_FNUM : (USB Offset: 0x010) (R/ 16) DEVICE DEVICE Device Frame Number -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */
uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */
uint16_t :1; /*!< bit: 14 Reserved */
uint16_t FNCERR:1; /*!< bit: 15 Frame Number CRC Error */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_FNUM_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_FNUM_OFFSET 0x010 /**< \brief (USB_DEVICE_FNUM offset) DEVICE Device Frame Number */
#define USB_DEVICE_FNUM_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_FNUM reset_value) DEVICE Device Frame Number */
#define USB_DEVICE_FNUM_MFNUM_Pos 0 /**< \brief (USB_DEVICE_FNUM) Micro Frame Number */
#define USB_DEVICE_FNUM_MFNUM_Msk (_U_(0x7) << USB_DEVICE_FNUM_MFNUM_Pos)
#define USB_DEVICE_FNUM_MFNUM(value) (USB_DEVICE_FNUM_MFNUM_Msk & ((value) << USB_DEVICE_FNUM_MFNUM_Pos))
#define USB_DEVICE_FNUM_FNUM_Pos 3 /**< \brief (USB_DEVICE_FNUM) Frame Number */
#define USB_DEVICE_FNUM_FNUM_Msk (_U_(0x7FF) << USB_DEVICE_FNUM_FNUM_Pos)
#define USB_DEVICE_FNUM_FNUM(value) (USB_DEVICE_FNUM_FNUM_Msk & ((value) << USB_DEVICE_FNUM_FNUM_Pos))
#define USB_DEVICE_FNUM_FNCERR_Pos 15 /**< \brief (USB_DEVICE_FNUM) Frame Number CRC Error */
#define USB_DEVICE_FNUM_FNCERR (_U_(0x1) << USB_DEVICE_FNUM_FNCERR_Pos)
#define USB_DEVICE_FNUM_MASK _U_(0xBFFF) /**< \brief (USB_DEVICE_FNUM) MASK Register */
/* -------- USB_HOST_FNUM : (USB Offset: 0x010) (R/W 16) HOST HOST Host Frame Number -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t MFNUM:3; /*!< bit: 0.. 2 Micro Frame Number */
uint16_t FNUM:11; /*!< bit: 3..13 Frame Number */
uint16_t :2; /*!< bit: 14..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_FNUM_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_FNUM_OFFSET 0x010 /**< \brief (USB_HOST_FNUM offset) HOST Host Frame Number */
#define USB_HOST_FNUM_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_FNUM reset_value) HOST Host Frame Number */
#define USB_HOST_FNUM_MFNUM_Pos 0 /**< \brief (USB_HOST_FNUM) Micro Frame Number */
#define USB_HOST_FNUM_MFNUM_Msk (_U_(0x7) << USB_HOST_FNUM_MFNUM_Pos)
#define USB_HOST_FNUM_MFNUM(value) (USB_HOST_FNUM_MFNUM_Msk & ((value) << USB_HOST_FNUM_MFNUM_Pos))
#define USB_HOST_FNUM_FNUM_Pos 3 /**< \brief (USB_HOST_FNUM) Frame Number */
#define USB_HOST_FNUM_FNUM_Msk (_U_(0x7FF) << USB_HOST_FNUM_FNUM_Pos)
#define USB_HOST_FNUM_FNUM(value) (USB_HOST_FNUM_FNUM_Msk & ((value) << USB_HOST_FNUM_FNUM_Pos))
#define USB_HOST_FNUM_MASK _U_(0x3FFF) /**< \brief (USB_HOST_FNUM) MASK Register */
/* -------- USB_HOST_FLENHIGH : (USB Offset: 0x012) (R/ 8) HOST HOST Host Frame Length -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t FLENHIGH:8; /*!< bit: 0.. 7 Frame Length */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_FLENHIGH_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_FLENHIGH_OFFSET 0x012 /**< \brief (USB_HOST_FLENHIGH offset) HOST Host Frame Length */
#define USB_HOST_FLENHIGH_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_FLENHIGH reset_value) HOST Host Frame Length */
#define USB_HOST_FLENHIGH_FLENHIGH_Pos 0 /**< \brief (USB_HOST_FLENHIGH) Frame Length */
#define USB_HOST_FLENHIGH_FLENHIGH_Msk (_U_(0xFF) << USB_HOST_FLENHIGH_FLENHIGH_Pos)
#define USB_HOST_FLENHIGH_FLENHIGH(value) (USB_HOST_FLENHIGH_FLENHIGH_Msk & ((value) << USB_HOST_FLENHIGH_FLENHIGH_Pos))
#define USB_HOST_FLENHIGH_MASK _U_(0xFF) /**< \brief (USB_HOST_FLENHIGH) MASK Register */
/* -------- USB_DEVICE_INTENCLR : (USB Offset: 0x014) (R/W 16) DEVICE DEVICE Device Interrupt Enable Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_INTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_INTENCLR_OFFSET 0x014 /**< \brief (USB_DEVICE_INTENCLR offset) DEVICE Device Interrupt Enable Clear */
#define USB_DEVICE_INTENCLR_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTENCLR reset_value) DEVICE Device Interrupt Enable Clear */
#define USB_DEVICE_INTENCLR_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENCLR) Suspend Interrupt Enable */
#define USB_DEVICE_INTENCLR_SUSPEND (_U_(0x1) << USB_DEVICE_INTENCLR_SUSPEND_Pos)
#define USB_DEVICE_INTENCLR_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENCLR) Micro Start of Frame Interrupt Enable in High Speed Mode */
#define USB_DEVICE_INTENCLR_MSOF (_U_(0x1) << USB_DEVICE_INTENCLR_MSOF_Pos)
#define USB_DEVICE_INTENCLR_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENCLR) Start Of Frame Interrupt Enable */
#define USB_DEVICE_INTENCLR_SOF (_U_(0x1) << USB_DEVICE_INTENCLR_SOF_Pos)
#define USB_DEVICE_INTENCLR_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENCLR) End of Reset Interrupt Enable */
#define USB_DEVICE_INTENCLR_EORST (_U_(0x1) << USB_DEVICE_INTENCLR_EORST_Pos)
#define USB_DEVICE_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENCLR) Wake Up Interrupt Enable */
#define USB_DEVICE_INTENCLR_WAKEUP (_U_(0x1) << USB_DEVICE_INTENCLR_WAKEUP_Pos)
#define USB_DEVICE_INTENCLR_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENCLR) End Of Resume Interrupt Enable */
#define USB_DEVICE_INTENCLR_EORSM (_U_(0x1) << USB_DEVICE_INTENCLR_EORSM_Pos)
#define USB_DEVICE_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENCLR) Upstream Resume Interrupt Enable */
#define USB_DEVICE_INTENCLR_UPRSM (_U_(0x1) << USB_DEVICE_INTENCLR_UPRSM_Pos)
#define USB_DEVICE_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENCLR) Ram Access Interrupt Enable */
#define USB_DEVICE_INTENCLR_RAMACER (_U_(0x1) << USB_DEVICE_INTENCLR_RAMACER_Pos)
#define USB_DEVICE_INTENCLR_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Not Yet Interrupt Enable */
#define USB_DEVICE_INTENCLR_LPMNYET (_U_(0x1) << USB_DEVICE_INTENCLR_LPMNYET_Pos)
#define USB_DEVICE_INTENCLR_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENCLR) Link Power Management Suspend Interrupt Enable */
#define USB_DEVICE_INTENCLR_LPMSUSP (_U_(0x1) << USB_DEVICE_INTENCLR_LPMSUSP_Pos)
#define USB_DEVICE_INTENCLR_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTENCLR) MASK Register */
/* -------- USB_HOST_INTENCLR : (USB Offset: 0x014) (R/W 16) HOST HOST Host Interrupt Enable Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t :2; /*!< bit: 0.. 1 Reserved */
uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame Interrupt Disable */
uint16_t RST:1; /*!< bit: 3 BUS Reset Interrupt Disable */
uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Disable */
uint16_t DNRSM:1; /*!< bit: 5 DownStream to Device Interrupt Disable */
uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume from Device Interrupt Disable */
uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Disable */
uint16_t DCONN:1; /*!< bit: 8 Device Connection Interrupt Disable */
uint16_t DDISC:1; /*!< bit: 9 Device Disconnection Interrupt Disable */
uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_INTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_INTENCLR_OFFSET 0x014 /**< \brief (USB_HOST_INTENCLR offset) HOST Host Interrupt Enable Clear */
#define USB_HOST_INTENCLR_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_INTENCLR reset_value) HOST Host Interrupt Enable Clear */
#define USB_HOST_INTENCLR_HSOF_Pos 2 /**< \brief (USB_HOST_INTENCLR) Host Start Of Frame Interrupt Disable */
#define USB_HOST_INTENCLR_HSOF (_U_(0x1) << USB_HOST_INTENCLR_HSOF_Pos)
#define USB_HOST_INTENCLR_RST_Pos 3 /**< \brief (USB_HOST_INTENCLR) BUS Reset Interrupt Disable */
#define USB_HOST_INTENCLR_RST (_U_(0x1) << USB_HOST_INTENCLR_RST_Pos)
#define USB_HOST_INTENCLR_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTENCLR) Wake Up Interrupt Disable */
#define USB_HOST_INTENCLR_WAKEUP (_U_(0x1) << USB_HOST_INTENCLR_WAKEUP_Pos)
#define USB_HOST_INTENCLR_DNRSM_Pos 5 /**< \brief (USB_HOST_INTENCLR) DownStream to Device Interrupt Disable */
#define USB_HOST_INTENCLR_DNRSM (_U_(0x1) << USB_HOST_INTENCLR_DNRSM_Pos)
#define USB_HOST_INTENCLR_UPRSM_Pos 6 /**< \brief (USB_HOST_INTENCLR) Upstream Resume from Device Interrupt Disable */
#define USB_HOST_INTENCLR_UPRSM (_U_(0x1) << USB_HOST_INTENCLR_UPRSM_Pos)
#define USB_HOST_INTENCLR_RAMACER_Pos 7 /**< \brief (USB_HOST_INTENCLR) Ram Access Interrupt Disable */
#define USB_HOST_INTENCLR_RAMACER (_U_(0x1) << USB_HOST_INTENCLR_RAMACER_Pos)
#define USB_HOST_INTENCLR_DCONN_Pos 8 /**< \brief (USB_HOST_INTENCLR) Device Connection Interrupt Disable */
#define USB_HOST_INTENCLR_DCONN (_U_(0x1) << USB_HOST_INTENCLR_DCONN_Pos)
#define USB_HOST_INTENCLR_DDISC_Pos 9 /**< \brief (USB_HOST_INTENCLR) Device Disconnection Interrupt Disable */
#define USB_HOST_INTENCLR_DDISC (_U_(0x1) << USB_HOST_INTENCLR_DDISC_Pos)
#define USB_HOST_INTENCLR_MASK _U_(0x03FC) /**< \brief (USB_HOST_INTENCLR) MASK Register */
/* -------- USB_DEVICE_INTENSET : (USB Offset: 0x018) (R/W 16) DEVICE DEVICE Device Interrupt Enable Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t SUSPEND:1; /*!< bit: 0 Suspend Interrupt Enable */
uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame Interrupt Enable in High Speed Mode */
uint16_t SOF:1; /*!< bit: 2 Start Of Frame Interrupt Enable */
uint16_t EORST:1; /*!< bit: 3 End of Reset Interrupt Enable */
uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
uint16_t EORSM:1; /*!< bit: 5 End Of Resume Interrupt Enable */
uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume Interrupt Enable */
uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet Interrupt Enable */
uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend Interrupt Enable */
uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_INTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_INTENSET_OFFSET 0x018 /**< \brief (USB_DEVICE_INTENSET offset) DEVICE Device Interrupt Enable Set */
#define USB_DEVICE_INTENSET_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTENSET reset_value) DEVICE Device Interrupt Enable Set */
#define USB_DEVICE_INTENSET_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTENSET) Suspend Interrupt Enable */
#define USB_DEVICE_INTENSET_SUSPEND (_U_(0x1) << USB_DEVICE_INTENSET_SUSPEND_Pos)
#define USB_DEVICE_INTENSET_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTENSET) Micro Start of Frame Interrupt Enable in High Speed Mode */
#define USB_DEVICE_INTENSET_MSOF (_U_(0x1) << USB_DEVICE_INTENSET_MSOF_Pos)
#define USB_DEVICE_INTENSET_SOF_Pos 2 /**< \brief (USB_DEVICE_INTENSET) Start Of Frame Interrupt Enable */
#define USB_DEVICE_INTENSET_SOF (_U_(0x1) << USB_DEVICE_INTENSET_SOF_Pos)
#define USB_DEVICE_INTENSET_EORST_Pos 3 /**< \brief (USB_DEVICE_INTENSET) End of Reset Interrupt Enable */
#define USB_DEVICE_INTENSET_EORST (_U_(0x1) << USB_DEVICE_INTENSET_EORST_Pos)
#define USB_DEVICE_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTENSET) Wake Up Interrupt Enable */
#define USB_DEVICE_INTENSET_WAKEUP (_U_(0x1) << USB_DEVICE_INTENSET_WAKEUP_Pos)
#define USB_DEVICE_INTENSET_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTENSET) End Of Resume Interrupt Enable */
#define USB_DEVICE_INTENSET_EORSM (_U_(0x1) << USB_DEVICE_INTENSET_EORSM_Pos)
#define USB_DEVICE_INTENSET_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTENSET) Upstream Resume Interrupt Enable */
#define USB_DEVICE_INTENSET_UPRSM (_U_(0x1) << USB_DEVICE_INTENSET_UPRSM_Pos)
#define USB_DEVICE_INTENSET_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTENSET) Ram Access Interrupt Enable */
#define USB_DEVICE_INTENSET_RAMACER (_U_(0x1) << USB_DEVICE_INTENSET_RAMACER_Pos)
#define USB_DEVICE_INTENSET_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Not Yet Interrupt Enable */
#define USB_DEVICE_INTENSET_LPMNYET (_U_(0x1) << USB_DEVICE_INTENSET_LPMNYET_Pos)
#define USB_DEVICE_INTENSET_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTENSET) Link Power Management Suspend Interrupt Enable */
#define USB_DEVICE_INTENSET_LPMSUSP (_U_(0x1) << USB_DEVICE_INTENSET_LPMSUSP_Pos)
#define USB_DEVICE_INTENSET_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTENSET) MASK Register */
/* -------- USB_HOST_INTENSET : (USB Offset: 0x018) (R/W 16) HOST HOST Host Interrupt Enable Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t :2; /*!< bit: 0.. 1 Reserved */
uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame Interrupt Enable */
uint16_t RST:1; /*!< bit: 3 Bus Reset Interrupt Enable */
uint16_t WAKEUP:1; /*!< bit: 4 Wake Up Interrupt Enable */
uint16_t DNRSM:1; /*!< bit: 5 DownStream to the Device Interrupt Enable */
uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume fromthe device Interrupt Enable */
uint16_t RAMACER:1; /*!< bit: 7 Ram Access Interrupt Enable */
uint16_t DCONN:1; /*!< bit: 8 Link Power Management Interrupt Enable */
uint16_t DDISC:1; /*!< bit: 9 Device Disconnection Interrupt Enable */
uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_INTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_INTENSET_OFFSET 0x018 /**< \brief (USB_HOST_INTENSET offset) HOST Host Interrupt Enable Set */
#define USB_HOST_INTENSET_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_INTENSET reset_value) HOST Host Interrupt Enable Set */
#define USB_HOST_INTENSET_HSOF_Pos 2 /**< \brief (USB_HOST_INTENSET) Host Start Of Frame Interrupt Enable */
#define USB_HOST_INTENSET_HSOF (_U_(0x1) << USB_HOST_INTENSET_HSOF_Pos)
#define USB_HOST_INTENSET_RST_Pos 3 /**< \brief (USB_HOST_INTENSET) Bus Reset Interrupt Enable */
#define USB_HOST_INTENSET_RST (_U_(0x1) << USB_HOST_INTENSET_RST_Pos)
#define USB_HOST_INTENSET_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTENSET) Wake Up Interrupt Enable */
#define USB_HOST_INTENSET_WAKEUP (_U_(0x1) << USB_HOST_INTENSET_WAKEUP_Pos)
#define USB_HOST_INTENSET_DNRSM_Pos 5 /**< \brief (USB_HOST_INTENSET) DownStream to the Device Interrupt Enable */
#define USB_HOST_INTENSET_DNRSM (_U_(0x1) << USB_HOST_INTENSET_DNRSM_Pos)
#define USB_HOST_INTENSET_UPRSM_Pos 6 /**< \brief (USB_HOST_INTENSET) Upstream Resume fromthe device Interrupt Enable */
#define USB_HOST_INTENSET_UPRSM (_U_(0x1) << USB_HOST_INTENSET_UPRSM_Pos)
#define USB_HOST_INTENSET_RAMACER_Pos 7 /**< \brief (USB_HOST_INTENSET) Ram Access Interrupt Enable */
#define USB_HOST_INTENSET_RAMACER (_U_(0x1) << USB_HOST_INTENSET_RAMACER_Pos)
#define USB_HOST_INTENSET_DCONN_Pos 8 /**< \brief (USB_HOST_INTENSET) Link Power Management Interrupt Enable */
#define USB_HOST_INTENSET_DCONN (_U_(0x1) << USB_HOST_INTENSET_DCONN_Pos)
#define USB_HOST_INTENSET_DDISC_Pos 9 /**< \brief (USB_HOST_INTENSET) Device Disconnection Interrupt Enable */
#define USB_HOST_INTENSET_DDISC (_U_(0x1) << USB_HOST_INTENSET_DDISC_Pos)
#define USB_HOST_INTENSET_MASK _U_(0x03FC) /**< \brief (USB_HOST_INTENSET) MASK Register */
/* -------- USB_DEVICE_INTFLAG : (USB Offset: 0x01C) (R/W 16) DEVICE DEVICE Device Interrupt Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union { // __I to avoid read-modify-write on write-to-clear register
struct {
__I uint16_t SUSPEND:1; /*!< bit: 0 Suspend */
__I uint16_t MSOF:1; /*!< bit: 1 Micro Start of Frame in High Speed Mode */
__I uint16_t SOF:1; /*!< bit: 2 Start Of Frame */
__I uint16_t EORST:1; /*!< bit: 3 End of Reset */
__I uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */
__I uint16_t EORSM:1; /*!< bit: 5 End Of Resume */
__I uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume */
__I uint16_t RAMACER:1; /*!< bit: 7 Ram Access */
__I uint16_t LPMNYET:1; /*!< bit: 8 Link Power Management Not Yet */
__I uint16_t LPMSUSP:1; /*!< bit: 9 Link Power Management Suspend */
__I uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_INTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_INTFLAG_OFFSET 0x01C /**< \brief (USB_DEVICE_INTFLAG offset) DEVICE Device Interrupt Flag */
#define USB_DEVICE_INTFLAG_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_INTFLAG reset_value) DEVICE Device Interrupt Flag */
#define USB_DEVICE_INTFLAG_SUSPEND_Pos 0 /**< \brief (USB_DEVICE_INTFLAG) Suspend */
#define USB_DEVICE_INTFLAG_SUSPEND (_U_(0x1) << USB_DEVICE_INTFLAG_SUSPEND_Pos)
#define USB_DEVICE_INTFLAG_MSOF_Pos 1 /**< \brief (USB_DEVICE_INTFLAG) Micro Start of Frame in High Speed Mode */
#define USB_DEVICE_INTFLAG_MSOF (_U_(0x1) << USB_DEVICE_INTFLAG_MSOF_Pos)
#define USB_DEVICE_INTFLAG_SOF_Pos 2 /**< \brief (USB_DEVICE_INTFLAG) Start Of Frame */
#define USB_DEVICE_INTFLAG_SOF (_U_(0x1) << USB_DEVICE_INTFLAG_SOF_Pos)
#define USB_DEVICE_INTFLAG_EORST_Pos 3 /**< \brief (USB_DEVICE_INTFLAG) End of Reset */
#define USB_DEVICE_INTFLAG_EORST (_U_(0x1) << USB_DEVICE_INTFLAG_EORST_Pos)
#define USB_DEVICE_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_DEVICE_INTFLAG) Wake Up */
#define USB_DEVICE_INTFLAG_WAKEUP (_U_(0x1) << USB_DEVICE_INTFLAG_WAKEUP_Pos)
#define USB_DEVICE_INTFLAG_EORSM_Pos 5 /**< \brief (USB_DEVICE_INTFLAG) End Of Resume */
#define USB_DEVICE_INTFLAG_EORSM (_U_(0x1) << USB_DEVICE_INTFLAG_EORSM_Pos)
#define USB_DEVICE_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_DEVICE_INTFLAG) Upstream Resume */
#define USB_DEVICE_INTFLAG_UPRSM (_U_(0x1) << USB_DEVICE_INTFLAG_UPRSM_Pos)
#define USB_DEVICE_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_DEVICE_INTFLAG) Ram Access */
#define USB_DEVICE_INTFLAG_RAMACER (_U_(0x1) << USB_DEVICE_INTFLAG_RAMACER_Pos)
#define USB_DEVICE_INTFLAG_LPMNYET_Pos 8 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Not Yet */
#define USB_DEVICE_INTFLAG_LPMNYET (_U_(0x1) << USB_DEVICE_INTFLAG_LPMNYET_Pos)
#define USB_DEVICE_INTFLAG_LPMSUSP_Pos 9 /**< \brief (USB_DEVICE_INTFLAG) Link Power Management Suspend */
#define USB_DEVICE_INTFLAG_LPMSUSP (_U_(0x1) << USB_DEVICE_INTFLAG_LPMSUSP_Pos)
#define USB_DEVICE_INTFLAG_MASK _U_(0x03FF) /**< \brief (USB_DEVICE_INTFLAG) MASK Register */
/* -------- USB_HOST_INTFLAG : (USB Offset: 0x01C) (R/W 16) HOST HOST Host Interrupt Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union { // __I to avoid read-modify-write on write-to-clear register
struct {
__I uint16_t :2; /*!< bit: 0.. 1 Reserved */
__I uint16_t HSOF:1; /*!< bit: 2 Host Start Of Frame */
__I uint16_t RST:1; /*!< bit: 3 Bus Reset */
__I uint16_t WAKEUP:1; /*!< bit: 4 Wake Up */
__I uint16_t DNRSM:1; /*!< bit: 5 Downstream */
__I uint16_t UPRSM:1; /*!< bit: 6 Upstream Resume from the Device */
__I uint16_t RAMACER:1; /*!< bit: 7 Ram Access */
__I uint16_t DCONN:1; /*!< bit: 8 Device Connection */
__I uint16_t DDISC:1; /*!< bit: 9 Device Disconnection */
__I uint16_t :6; /*!< bit: 10..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_INTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_INTFLAG_OFFSET 0x01C /**< \brief (USB_HOST_INTFLAG offset) HOST Host Interrupt Flag */
#define USB_HOST_INTFLAG_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_INTFLAG reset_value) HOST Host Interrupt Flag */
#define USB_HOST_INTFLAG_HSOF_Pos 2 /**< \brief (USB_HOST_INTFLAG) Host Start Of Frame */
#define USB_HOST_INTFLAG_HSOF (_U_(0x1) << USB_HOST_INTFLAG_HSOF_Pos)
#define USB_HOST_INTFLAG_RST_Pos 3 /**< \brief (USB_HOST_INTFLAG) Bus Reset */
#define USB_HOST_INTFLAG_RST (_U_(0x1) << USB_HOST_INTFLAG_RST_Pos)
#define USB_HOST_INTFLAG_WAKEUP_Pos 4 /**< \brief (USB_HOST_INTFLAG) Wake Up */
#define USB_HOST_INTFLAG_WAKEUP (_U_(0x1) << USB_HOST_INTFLAG_WAKEUP_Pos)
#define USB_HOST_INTFLAG_DNRSM_Pos 5 /**< \brief (USB_HOST_INTFLAG) Downstream */
#define USB_HOST_INTFLAG_DNRSM (_U_(0x1) << USB_HOST_INTFLAG_DNRSM_Pos)
#define USB_HOST_INTFLAG_UPRSM_Pos 6 /**< \brief (USB_HOST_INTFLAG) Upstream Resume from the Device */
#define USB_HOST_INTFLAG_UPRSM (_U_(0x1) << USB_HOST_INTFLAG_UPRSM_Pos)
#define USB_HOST_INTFLAG_RAMACER_Pos 7 /**< \brief (USB_HOST_INTFLAG) Ram Access */
#define USB_HOST_INTFLAG_RAMACER (_U_(0x1) << USB_HOST_INTFLAG_RAMACER_Pos)
#define USB_HOST_INTFLAG_DCONN_Pos 8 /**< \brief (USB_HOST_INTFLAG) Device Connection */
#define USB_HOST_INTFLAG_DCONN (_U_(0x1) << USB_HOST_INTFLAG_DCONN_Pos)
#define USB_HOST_INTFLAG_DDISC_Pos 9 /**< \brief (USB_HOST_INTFLAG) Device Disconnection */
#define USB_HOST_INTFLAG_DDISC (_U_(0x1) << USB_HOST_INTFLAG_DDISC_Pos)
#define USB_HOST_INTFLAG_MASK _U_(0x03FC) /**< \brief (USB_HOST_INTFLAG) MASK Register */
/* -------- USB_DEVICE_EPINTSMRY : (USB Offset: 0x020) (R/ 16) DEVICE DEVICE End Point Interrupt Summary -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t EPINT0:1; /*!< bit: 0 End Point 0 Interrupt */
uint16_t EPINT1:1; /*!< bit: 1 End Point 1 Interrupt */
uint16_t EPINT2:1; /*!< bit: 2 End Point 2 Interrupt */
uint16_t EPINT3:1; /*!< bit: 3 End Point 3 Interrupt */
uint16_t EPINT4:1; /*!< bit: 4 End Point 4 Interrupt */
uint16_t EPINT5:1; /*!< bit: 5 End Point 5 Interrupt */
uint16_t EPINT6:1; /*!< bit: 6 End Point 6 Interrupt */
uint16_t EPINT7:1; /*!< bit: 7 End Point 7 Interrupt */
uint16_t :8; /*!< bit: 8..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint16_t EPINT:8; /*!< bit: 0.. 7 End Point x Interrupt */
uint16_t :8; /*!< bit: 8..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_EPINTSMRY_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPINTSMRY_OFFSET 0x020 /**< \brief (USB_DEVICE_EPINTSMRY offset) DEVICE End Point Interrupt Summary */
#define USB_DEVICE_EPINTSMRY_RESETVALUE _U_(0x0000) /**< \brief (USB_DEVICE_EPINTSMRY reset_value) DEVICE End Point Interrupt Summary */
#define USB_DEVICE_EPINTSMRY_EPINT0_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 0 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT0 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT0_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT1_Pos 1 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 1 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT1 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT1_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT2_Pos 2 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 2 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT2 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT2_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT3_Pos 3 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 3 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT3 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT3_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT4_Pos 4 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 4 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT4 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT4_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT5_Pos 5 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 5 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT5 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT5_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT6_Pos 6 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 6 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT6 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT6_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT7_Pos 7 /**< \brief (USB_DEVICE_EPINTSMRY) End Point 7 Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT7 (_U_(1) << USB_DEVICE_EPINTSMRY_EPINT7_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT_Pos 0 /**< \brief (USB_DEVICE_EPINTSMRY) End Point x Interrupt */
#define USB_DEVICE_EPINTSMRY_EPINT_Msk (_U_(0xFF) << USB_DEVICE_EPINTSMRY_EPINT_Pos)
#define USB_DEVICE_EPINTSMRY_EPINT(value) (USB_DEVICE_EPINTSMRY_EPINT_Msk & ((value) << USB_DEVICE_EPINTSMRY_EPINT_Pos))
#define USB_DEVICE_EPINTSMRY_MASK _U_(0x00FF) /**< \brief (USB_DEVICE_EPINTSMRY) MASK Register */
/* -------- USB_HOST_PINTSMRY : (USB Offset: 0x020) (R/ 16) HOST HOST Pipe Interrupt Summary -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t EPINT0:1; /*!< bit: 0 Pipe 0 Interrupt */
uint16_t EPINT1:1; /*!< bit: 1 Pipe 1 Interrupt */
uint16_t EPINT2:1; /*!< bit: 2 Pipe 2 Interrupt */
uint16_t EPINT3:1; /*!< bit: 3 Pipe 3 Interrupt */
uint16_t EPINT4:1; /*!< bit: 4 Pipe 4 Interrupt */
uint16_t EPINT5:1; /*!< bit: 5 Pipe 5 Interrupt */
uint16_t EPINT6:1; /*!< bit: 6 Pipe 6 Interrupt */
uint16_t EPINT7:1; /*!< bit: 7 Pipe 7 Interrupt */
uint16_t :8; /*!< bit: 8..15 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint16_t EPINT:8; /*!< bit: 0.. 7 Pipe x Interrupt */
uint16_t :8; /*!< bit: 8..15 Reserved */
} vec; /*!< Structure used for vec access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_PINTSMRY_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PINTSMRY_OFFSET 0x020 /**< \brief (USB_HOST_PINTSMRY offset) HOST Pipe Interrupt Summary */
#define USB_HOST_PINTSMRY_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_PINTSMRY reset_value) HOST Pipe Interrupt Summary */
#define USB_HOST_PINTSMRY_EPINT0_Pos 0 /**< \brief (USB_HOST_PINTSMRY) Pipe 0 Interrupt */
#define USB_HOST_PINTSMRY_EPINT0 (_U_(1) << USB_HOST_PINTSMRY_EPINT0_Pos)
#define USB_HOST_PINTSMRY_EPINT1_Pos 1 /**< \brief (USB_HOST_PINTSMRY) Pipe 1 Interrupt */
#define USB_HOST_PINTSMRY_EPINT1 (_U_(1) << USB_HOST_PINTSMRY_EPINT1_Pos)
#define USB_HOST_PINTSMRY_EPINT2_Pos 2 /**< \brief (USB_HOST_PINTSMRY) Pipe 2 Interrupt */
#define USB_HOST_PINTSMRY_EPINT2 (_U_(1) << USB_HOST_PINTSMRY_EPINT2_Pos)
#define USB_HOST_PINTSMRY_EPINT3_Pos 3 /**< \brief (USB_HOST_PINTSMRY) Pipe 3 Interrupt */
#define USB_HOST_PINTSMRY_EPINT3 (_U_(1) << USB_HOST_PINTSMRY_EPINT3_Pos)
#define USB_HOST_PINTSMRY_EPINT4_Pos 4 /**< \brief (USB_HOST_PINTSMRY) Pipe 4 Interrupt */
#define USB_HOST_PINTSMRY_EPINT4 (_U_(1) << USB_HOST_PINTSMRY_EPINT4_Pos)
#define USB_HOST_PINTSMRY_EPINT5_Pos 5 /**< \brief (USB_HOST_PINTSMRY) Pipe 5 Interrupt */
#define USB_HOST_PINTSMRY_EPINT5 (_U_(1) << USB_HOST_PINTSMRY_EPINT5_Pos)
#define USB_HOST_PINTSMRY_EPINT6_Pos 6 /**< \brief (USB_HOST_PINTSMRY) Pipe 6 Interrupt */
#define USB_HOST_PINTSMRY_EPINT6 (_U_(1) << USB_HOST_PINTSMRY_EPINT6_Pos)
#define USB_HOST_PINTSMRY_EPINT7_Pos 7 /**< \brief (USB_HOST_PINTSMRY) Pipe 7 Interrupt */
#define USB_HOST_PINTSMRY_EPINT7 (_U_(1) << USB_HOST_PINTSMRY_EPINT7_Pos)
#define USB_HOST_PINTSMRY_EPINT_Pos 0 /**< \brief (USB_HOST_PINTSMRY) Pipe x Interrupt */
#define USB_HOST_PINTSMRY_EPINT_Msk (_U_(0xFF) << USB_HOST_PINTSMRY_EPINT_Pos)
#define USB_HOST_PINTSMRY_EPINT(value) (USB_HOST_PINTSMRY_EPINT_Msk & ((value) << USB_HOST_PINTSMRY_EPINT_Pos))
#define USB_HOST_PINTSMRY_MASK _U_(0x00FF) /**< \brief (USB_HOST_PINTSMRY) MASK Register */
/* -------- USB_DESCADD : (USB Offset: 0x024) (R/W 32) Descriptor Address -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t DESCADD:32; /*!< bit: 0..31 Descriptor Address Value */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} USB_DESCADD_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DESCADD_OFFSET 0x024 /**< \brief (USB_DESCADD offset) Descriptor Address */
#define USB_DESCADD_RESETVALUE _U_(0x00000000) /**< \brief (USB_DESCADD reset_value) Descriptor Address */
#define USB_DESCADD_DESCADD_Pos 0 /**< \brief (USB_DESCADD) Descriptor Address Value */
#define USB_DESCADD_DESCADD_Msk (_U_(0xFFFFFFFF) << USB_DESCADD_DESCADD_Pos)
#define USB_DESCADD_DESCADD(value) (USB_DESCADD_DESCADD_Msk & ((value) << USB_DESCADD_DESCADD_Pos))
#define USB_DESCADD_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DESCADD) MASK Register */
/* -------- USB_PADCAL : (USB Offset: 0x028) (R/W 16) USB PAD Calibration -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t TRANSP:5; /*!< bit: 0.. 4 USB Pad Transp calibration */
uint16_t :1; /*!< bit: 5 Reserved */
uint16_t TRANSN:5; /*!< bit: 6..10 USB Pad Transn calibration */
uint16_t :1; /*!< bit: 11 Reserved */
uint16_t TRIM:3; /*!< bit: 12..14 USB Pad Trim calibration */
uint16_t :1; /*!< bit: 15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_PADCAL_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_PADCAL_OFFSET 0x028 /**< \brief (USB_PADCAL offset) USB PAD Calibration */
#define USB_PADCAL_RESETVALUE _U_(0x0000) /**< \brief (USB_PADCAL reset_value) USB PAD Calibration */
#define USB_PADCAL_TRANSP_Pos 0 /**< \brief (USB_PADCAL) USB Pad Transp calibration */
#define USB_PADCAL_TRANSP_Msk (_U_(0x1F) << USB_PADCAL_TRANSP_Pos)
#define USB_PADCAL_TRANSP(value) (USB_PADCAL_TRANSP_Msk & ((value) << USB_PADCAL_TRANSP_Pos))
#define USB_PADCAL_TRANSN_Pos 6 /**< \brief (USB_PADCAL) USB Pad Transn calibration */
#define USB_PADCAL_TRANSN_Msk (_U_(0x1F) << USB_PADCAL_TRANSN_Pos)
#define USB_PADCAL_TRANSN(value) (USB_PADCAL_TRANSN_Msk & ((value) << USB_PADCAL_TRANSN_Pos))
#define USB_PADCAL_TRIM_Pos 12 /**< \brief (USB_PADCAL) USB Pad Trim calibration */
#define USB_PADCAL_TRIM_Msk (_U_(0x7) << USB_PADCAL_TRIM_Pos)
#define USB_PADCAL_TRIM(value) (USB_PADCAL_TRIM_Msk & ((value) << USB_PADCAL_TRIM_Pos))
#define USB_PADCAL_MASK _U_(0x77DF) /**< \brief (USB_PADCAL) MASK Register */
/* -------- USB_DEVICE_EPCFG : (USB Offset: 0x100) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Configuration -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t EPTYPE0:3; /*!< bit: 0.. 2 End Point Type0 */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t EPTYPE1:3; /*!< bit: 4.. 6 End Point Type1 */
uint8_t NYETDIS:1; /*!< bit: 7 NYET Token Disable */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPCFG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPCFG_OFFSET 0x100 /**< \brief (USB_DEVICE_EPCFG offset) DEVICE_ENDPOINT End Point Configuration */
#define USB_DEVICE_EPCFG_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPCFG reset_value) DEVICE_ENDPOINT End Point Configuration */
#define USB_DEVICE_EPCFG_EPTYPE0_Pos 0 /**< \brief (USB_DEVICE_EPCFG) End Point Type0 */
#define USB_DEVICE_EPCFG_EPTYPE0_Msk (_U_(0x7) << USB_DEVICE_EPCFG_EPTYPE0_Pos)
#define USB_DEVICE_EPCFG_EPTYPE0(value) (USB_DEVICE_EPCFG_EPTYPE0_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE0_Pos))
#define USB_DEVICE_EPCFG_EPTYPE1_Pos 4 /**< \brief (USB_DEVICE_EPCFG) End Point Type1 */
#define USB_DEVICE_EPCFG_EPTYPE1_Msk (_U_(0x7) << USB_DEVICE_EPCFG_EPTYPE1_Pos)
#define USB_DEVICE_EPCFG_EPTYPE1(value) (USB_DEVICE_EPCFG_EPTYPE1_Msk & ((value) << USB_DEVICE_EPCFG_EPTYPE1_Pos))
#define USB_DEVICE_EPCFG_NYETDIS_Pos 7 /**< \brief (USB_DEVICE_EPCFG) NYET Token Disable */
#define USB_DEVICE_EPCFG_NYETDIS (_U_(0x1) << USB_DEVICE_EPCFG_NYETDIS_Pos)
#define USB_DEVICE_EPCFG_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPCFG) MASK Register */
/* -------- USB_HOST_PCFG : (USB Offset: 0x100) (R/W 8) HOST HOST_PIPE End Point Configuration -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t PTOKEN:2; /*!< bit: 0.. 1 Pipe Token */
uint8_t BK:1; /*!< bit: 2 Pipe Bank */
uint8_t PTYPE:3; /*!< bit: 3.. 5 Pipe Type */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PCFG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PCFG_OFFSET 0x100 /**< \brief (USB_HOST_PCFG offset) HOST_PIPE End Point Configuration */
#define USB_HOST_PCFG_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PCFG reset_value) HOST_PIPE End Point Configuration */
#define USB_HOST_PCFG_PTOKEN_Pos 0 /**< \brief (USB_HOST_PCFG) Pipe Token */
#define USB_HOST_PCFG_PTOKEN_Msk (_U_(0x3) << USB_HOST_PCFG_PTOKEN_Pos)
#define USB_HOST_PCFG_PTOKEN(value) (USB_HOST_PCFG_PTOKEN_Msk & ((value) << USB_HOST_PCFG_PTOKEN_Pos))
#define USB_HOST_PCFG_BK_Pos 2 /**< \brief (USB_HOST_PCFG) Pipe Bank */
#define USB_HOST_PCFG_BK (_U_(0x1) << USB_HOST_PCFG_BK_Pos)
#define USB_HOST_PCFG_PTYPE_Pos 3 /**< \brief (USB_HOST_PCFG) Pipe Type */
#define USB_HOST_PCFG_PTYPE_Msk (_U_(0x7) << USB_HOST_PCFG_PTYPE_Pos)
#define USB_HOST_PCFG_PTYPE(value) (USB_HOST_PCFG_PTYPE_Msk & ((value) << USB_HOST_PCFG_PTYPE_Pos))
#define USB_HOST_PCFG_MASK _U_(0x3F) /**< \brief (USB_HOST_PCFG) MASK Register */
/* -------- USB_HOST_BINTERVAL : (USB Offset: 0x103) (R/W 8) HOST HOST_PIPE Bus Access Period of Pipe -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t BITINTERVAL:8; /*!< bit: 0.. 7 Bit Interval */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_BINTERVAL_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_BINTERVAL_OFFSET 0x103 /**< \brief (USB_HOST_BINTERVAL offset) HOST_PIPE Bus Access Period of Pipe */
#define USB_HOST_BINTERVAL_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_BINTERVAL reset_value) HOST_PIPE Bus Access Period of Pipe */
#define USB_HOST_BINTERVAL_BITINTERVAL_Pos 0 /**< \brief (USB_HOST_BINTERVAL) Bit Interval */
#define USB_HOST_BINTERVAL_BITINTERVAL_Msk (_U_(0xFF) << USB_HOST_BINTERVAL_BITINTERVAL_Pos)
#define USB_HOST_BINTERVAL_BITINTERVAL(value) (USB_HOST_BINTERVAL_BITINTERVAL_Msk & ((value) << USB_HOST_BINTERVAL_BITINTERVAL_Pos))
#define USB_HOST_BINTERVAL_MASK _U_(0xFF) /**< \brief (USB_HOST_BINTERVAL) MASK Register */
/* -------- USB_DEVICE_EPSTATUSCLR : (USB Offset: 0x104) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Clear */
uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Clear */
uint8_t CURBK:1; /*!< bit: 2 Current Bank Clear */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Clear */
uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Clear */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */
} bit; /*!< Structure used for bit access */
struct {
uint8_t :4; /*!< bit: 0.. 3 Reserved */
uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Clear */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPSTATUSCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPSTATUSCLR_OFFSET 0x104 /**< \brief (USB_DEVICE_EPSTATUSCLR offset) DEVICE_ENDPOINT End Point Pipe Status Clear */
#define USB_DEVICE_EPSTATUSCLR_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUSCLR reset_value) DEVICE_ENDPOINT End Point Pipe Status Clear */
#define USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle OUT Clear */
#define USB_DEVICE_EPSTATUSCLR_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_DTGLOUT_Pos)
#define USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSCLR) Data Toggle IN Clear */
#define USB_DEVICE_EPSTATUSCLR_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_DTGLIN_Pos)
#define USB_DEVICE_EPSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSCLR) Current Bank Clear */
#define USB_DEVICE_EPSTATUSCLR_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_CURBK_Pos)
#define USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 0 Request Clear */
#define USB_DEVICE_EPSTATUSCLR_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUSCLR_STALLRQ0_Pos)
#define USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall 1 Request Clear */
#define USB_DEVICE_EPSTATUSCLR_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUSCLR_STALLRQ1_Pos)
#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSCLR) Stall x Request Clear */
#define USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos)
#define USB_DEVICE_EPSTATUSCLR_STALLRQ(value) (USB_DEVICE_EPSTATUSCLR_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSCLR_STALLRQ_Pos))
#define USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 0 Ready Clear */
#define USB_DEVICE_EPSTATUSCLR_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_BK0RDY_Pos)
#define USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSCLR) Bank 1 Ready Clear */
#define USB_DEVICE_EPSTATUSCLR_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUSCLR_BK1RDY_Pos)
#define USB_DEVICE_EPSTATUSCLR_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUSCLR) MASK Register */
/* -------- USB_HOST_PSTATUSCLR : (USB Offset: 0x104) ( /W 8) HOST HOST_PIPE End Point Pipe Status Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGL:1; /*!< bit: 0 Data Toggle clear */
uint8_t :1; /*!< bit: 1 Reserved */
uint8_t CURBK:1; /*!< bit: 2 Curren Bank clear */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze Clear */
uint8_t :1; /*!< bit: 5 Reserved */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Clear */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Clear */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PSTATUSCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PSTATUSCLR_OFFSET 0x104 /**< \brief (USB_HOST_PSTATUSCLR offset) HOST_PIPE End Point Pipe Status Clear */
#define USB_HOST_PSTATUSCLR_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PSTATUSCLR reset_value) HOST_PIPE End Point Pipe Status Clear */
#define USB_HOST_PSTATUSCLR_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUSCLR) Data Toggle clear */
#define USB_HOST_PSTATUSCLR_DTGL (_U_(0x1) << USB_HOST_PSTATUSCLR_DTGL_Pos)
#define USB_HOST_PSTATUSCLR_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUSCLR) Curren Bank clear */
#define USB_HOST_PSTATUSCLR_CURBK (_U_(0x1) << USB_HOST_PSTATUSCLR_CURBK_Pos)
#define USB_HOST_PSTATUSCLR_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUSCLR) Pipe Freeze Clear */
#define USB_HOST_PSTATUSCLR_PFREEZE (_U_(0x1) << USB_HOST_PSTATUSCLR_PFREEZE_Pos)
#define USB_HOST_PSTATUSCLR_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUSCLR) Bank 0 Ready Clear */
#define USB_HOST_PSTATUSCLR_BK0RDY (_U_(0x1) << USB_HOST_PSTATUSCLR_BK0RDY_Pos)
#define USB_HOST_PSTATUSCLR_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUSCLR) Bank 1 Ready Clear */
#define USB_HOST_PSTATUSCLR_BK1RDY (_U_(0x1) << USB_HOST_PSTATUSCLR_BK1RDY_Pos)
#define USB_HOST_PSTATUSCLR_MASK _U_(0xD5) /**< \brief (USB_HOST_PSTATUSCLR) MASK Register */
/* -------- USB_DEVICE_EPSTATUSSET : (USB Offset: 0x105) ( /W 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle OUT Set */
uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle IN Set */
uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request Set */
uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request Set */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */
} bit; /*!< Structure used for bit access */
struct {
uint8_t :4; /*!< bit: 0.. 3 Reserved */
uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request Set */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPSTATUSSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPSTATUSSET_OFFSET 0x105 /**< \brief (USB_DEVICE_EPSTATUSSET offset) DEVICE_ENDPOINT End Point Pipe Status Set */
#define USB_DEVICE_EPSTATUSSET_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUSSET reset_value) DEVICE_ENDPOINT End Point Pipe Status Set */
#define USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle OUT Set */
#define USB_DEVICE_EPSTATUSSET_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUSSET_DTGLOUT_Pos)
#define USB_DEVICE_EPSTATUSSET_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUSSET) Data Toggle IN Set */
#define USB_DEVICE_EPSTATUSSET_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUSSET_DTGLIN_Pos)
#define USB_DEVICE_EPSTATUSSET_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUSSET) Current Bank Set */
#define USB_DEVICE_EPSTATUSSET_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUSSET_CURBK_Pos)
#define USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 0 Request Set */
#define USB_DEVICE_EPSTATUSSET_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUSSET_STALLRQ0_Pos)
#define USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall 1 Request Set */
#define USB_DEVICE_EPSTATUSSET_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUSSET_STALLRQ1_Pos)
#define USB_DEVICE_EPSTATUSSET_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUSSET) Stall x Request Set */
#define USB_DEVICE_EPSTATUSSET_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos)
#define USB_DEVICE_EPSTATUSSET_STALLRQ(value) (USB_DEVICE_EPSTATUSSET_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUSSET_STALLRQ_Pos))
#define USB_DEVICE_EPSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 0 Ready Set */
#define USB_DEVICE_EPSTATUSSET_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUSSET_BK0RDY_Pos)
#define USB_DEVICE_EPSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUSSET) Bank 1 Ready Set */
#define USB_DEVICE_EPSTATUSSET_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUSSET_BK1RDY_Pos)
#define USB_DEVICE_EPSTATUSSET_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUSSET) MASK Register */
/* -------- USB_HOST_PSTATUSSET : (USB Offset: 0x105) ( /W 8) HOST HOST_PIPE End Point Pipe Status Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGL:1; /*!< bit: 0 Data Toggle Set */
uint8_t :1; /*!< bit: 1 Reserved */
uint8_t CURBK:1; /*!< bit: 2 Current Bank Set */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze Set */
uint8_t :1; /*!< bit: 5 Reserved */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 Ready Set */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 Ready Set */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PSTATUSSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PSTATUSSET_OFFSET 0x105 /**< \brief (USB_HOST_PSTATUSSET offset) HOST_PIPE End Point Pipe Status Set */
#define USB_HOST_PSTATUSSET_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PSTATUSSET reset_value) HOST_PIPE End Point Pipe Status Set */
#define USB_HOST_PSTATUSSET_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUSSET) Data Toggle Set */
#define USB_HOST_PSTATUSSET_DTGL (_U_(0x1) << USB_HOST_PSTATUSSET_DTGL_Pos)
#define USB_HOST_PSTATUSSET_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUSSET) Current Bank Set */
#define USB_HOST_PSTATUSSET_CURBK (_U_(0x1) << USB_HOST_PSTATUSSET_CURBK_Pos)
#define USB_HOST_PSTATUSSET_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUSSET) Pipe Freeze Set */
#define USB_HOST_PSTATUSSET_PFREEZE (_U_(0x1) << USB_HOST_PSTATUSSET_PFREEZE_Pos)
#define USB_HOST_PSTATUSSET_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUSSET) Bank 0 Ready Set */
#define USB_HOST_PSTATUSSET_BK0RDY (_U_(0x1) << USB_HOST_PSTATUSSET_BK0RDY_Pos)
#define USB_HOST_PSTATUSSET_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUSSET) Bank 1 Ready Set */
#define USB_HOST_PSTATUSSET_BK1RDY (_U_(0x1) << USB_HOST_PSTATUSSET_BK1RDY_Pos)
#define USB_HOST_PSTATUSSET_MASK _U_(0xD5) /**< \brief (USB_HOST_PSTATUSSET) MASK Register */
/* -------- USB_DEVICE_EPSTATUS : (USB Offset: 0x106) (R/ 8) DEVICE DEVICE_ENDPOINT End Point Pipe Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGLOUT:1; /*!< bit: 0 Data Toggle Out */
uint8_t DTGLIN:1; /*!< bit: 1 Data Toggle In */
uint8_t CURBK:1; /*!< bit: 2 Current Bank */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t STALLRQ0:1; /*!< bit: 4 Stall 0 Request */
uint8_t STALLRQ1:1; /*!< bit: 5 Stall 1 Request */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */
} bit; /*!< Structure used for bit access */
struct {
uint8_t :4; /*!< bit: 0.. 3 Reserved */
uint8_t STALLRQ:2; /*!< bit: 4.. 5 Stall x Request */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPSTATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPSTATUS_OFFSET 0x106 /**< \brief (USB_DEVICE_EPSTATUS offset) DEVICE_ENDPOINT End Point Pipe Status */
#define USB_DEVICE_EPSTATUS_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPSTATUS reset_value) DEVICE_ENDPOINT End Point Pipe Status */
#define USB_DEVICE_EPSTATUS_DTGLOUT_Pos 0 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle Out */
#define USB_DEVICE_EPSTATUS_DTGLOUT (_U_(0x1) << USB_DEVICE_EPSTATUS_DTGLOUT_Pos)
#define USB_DEVICE_EPSTATUS_DTGLIN_Pos 1 /**< \brief (USB_DEVICE_EPSTATUS) Data Toggle In */
#define USB_DEVICE_EPSTATUS_DTGLIN (_U_(0x1) << USB_DEVICE_EPSTATUS_DTGLIN_Pos)
#define USB_DEVICE_EPSTATUS_CURBK_Pos 2 /**< \brief (USB_DEVICE_EPSTATUS) Current Bank */
#define USB_DEVICE_EPSTATUS_CURBK (_U_(0x1) << USB_DEVICE_EPSTATUS_CURBK_Pos)
#define USB_DEVICE_EPSTATUS_STALLRQ0_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall 0 Request */
#define USB_DEVICE_EPSTATUS_STALLRQ0 (_U_(1) << USB_DEVICE_EPSTATUS_STALLRQ0_Pos)
#define USB_DEVICE_EPSTATUS_STALLRQ1_Pos 5 /**< \brief (USB_DEVICE_EPSTATUS) Stall 1 Request */
#define USB_DEVICE_EPSTATUS_STALLRQ1 (_U_(1) << USB_DEVICE_EPSTATUS_STALLRQ1_Pos)
#define USB_DEVICE_EPSTATUS_STALLRQ_Pos 4 /**< \brief (USB_DEVICE_EPSTATUS) Stall x Request */
#define USB_DEVICE_EPSTATUS_STALLRQ_Msk (_U_(0x3) << USB_DEVICE_EPSTATUS_STALLRQ_Pos)
#define USB_DEVICE_EPSTATUS_STALLRQ(value) (USB_DEVICE_EPSTATUS_STALLRQ_Msk & ((value) << USB_DEVICE_EPSTATUS_STALLRQ_Pos))
#define USB_DEVICE_EPSTATUS_BK0RDY_Pos 6 /**< \brief (USB_DEVICE_EPSTATUS) Bank 0 ready */
#define USB_DEVICE_EPSTATUS_BK0RDY (_U_(0x1) << USB_DEVICE_EPSTATUS_BK0RDY_Pos)
#define USB_DEVICE_EPSTATUS_BK1RDY_Pos 7 /**< \brief (USB_DEVICE_EPSTATUS) Bank 1 ready */
#define USB_DEVICE_EPSTATUS_BK1RDY (_U_(0x1) << USB_DEVICE_EPSTATUS_BK1RDY_Pos)
#define USB_DEVICE_EPSTATUS_MASK _U_(0xF7) /**< \brief (USB_DEVICE_EPSTATUS) MASK Register */
/* -------- USB_HOST_PSTATUS : (USB Offset: 0x106) (R/ 8) HOST HOST_PIPE End Point Pipe Status -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t DTGL:1; /*!< bit: 0 Data Toggle */
uint8_t :1; /*!< bit: 1 Reserved */
uint8_t CURBK:1; /*!< bit: 2 Current Bank */
uint8_t :1; /*!< bit: 3 Reserved */
uint8_t PFREEZE:1; /*!< bit: 4 Pipe Freeze */
uint8_t :1; /*!< bit: 5 Reserved */
uint8_t BK0RDY:1; /*!< bit: 6 Bank 0 ready */
uint8_t BK1RDY:1; /*!< bit: 7 Bank 1 ready */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PSTATUS_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PSTATUS_OFFSET 0x106 /**< \brief (USB_HOST_PSTATUS offset) HOST_PIPE End Point Pipe Status */
#define USB_HOST_PSTATUS_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PSTATUS reset_value) HOST_PIPE End Point Pipe Status */
#define USB_HOST_PSTATUS_DTGL_Pos 0 /**< \brief (USB_HOST_PSTATUS) Data Toggle */
#define USB_HOST_PSTATUS_DTGL (_U_(0x1) << USB_HOST_PSTATUS_DTGL_Pos)
#define USB_HOST_PSTATUS_CURBK_Pos 2 /**< \brief (USB_HOST_PSTATUS) Current Bank */
#define USB_HOST_PSTATUS_CURBK (_U_(0x1) << USB_HOST_PSTATUS_CURBK_Pos)
#define USB_HOST_PSTATUS_PFREEZE_Pos 4 /**< \brief (USB_HOST_PSTATUS) Pipe Freeze */
#define USB_HOST_PSTATUS_PFREEZE (_U_(0x1) << USB_HOST_PSTATUS_PFREEZE_Pos)
#define USB_HOST_PSTATUS_BK0RDY_Pos 6 /**< \brief (USB_HOST_PSTATUS) Bank 0 ready */
#define USB_HOST_PSTATUS_BK0RDY (_U_(0x1) << USB_HOST_PSTATUS_BK0RDY_Pos)
#define USB_HOST_PSTATUS_BK1RDY_Pos 7 /**< \brief (USB_HOST_PSTATUS) Bank 1 ready */
#define USB_HOST_PSTATUS_BK1RDY (_U_(0x1) << USB_HOST_PSTATUS_BK1RDY_Pos)
#define USB_HOST_PSTATUS_MASK _U_(0xD5) /**< \brief (USB_HOST_PSTATUS) MASK Register */
/* -------- USB_DEVICE_EPINTFLAG : (USB Offset: 0x107) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union { // __I to avoid read-modify-write on write-to-clear register
struct {
__I uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 */
__I uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 */
__I uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 */
__I uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 */
__I uint8_t RXSTP:1; /*!< bit: 4 Received Setup */
__I uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out */
__I uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out */
__I uint8_t :1; /*!< bit: 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
__I uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x */
__I uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x */
__I uint8_t :1; /*!< bit: 4 Reserved */
__I uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out */
__I uint8_t :1; /*!< bit: 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPINTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPINTFLAG_OFFSET 0x107 /**< \brief (USB_DEVICE_EPINTFLAG offset) DEVICE_ENDPOINT End Point Interrupt Flag */
#define USB_DEVICE_EPINTFLAG_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTFLAG reset_value) DEVICE_ENDPOINT End Point Interrupt Flag */
#define USB_DEVICE_EPINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 0 */
#define USB_DEVICE_EPINTFLAG_TRCPT0 (_U_(1) << USB_DEVICE_EPINTFLAG_TRCPT0_Pos)
#define USB_DEVICE_EPINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete 1 */
#define USB_DEVICE_EPINTFLAG_TRCPT1 (_U_(1) << USB_DEVICE_EPINTFLAG_TRCPT1_Pos)
#define USB_DEVICE_EPINTFLAG_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTFLAG) Transfer Complete x */
#define USB_DEVICE_EPINTFLAG_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_TRCPT_Pos)
#define USB_DEVICE_EPINTFLAG_TRCPT(value) (USB_DEVICE_EPINTFLAG_TRCPT_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRCPT_Pos))
#define USB_DEVICE_EPINTFLAG_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 0 */
#define USB_DEVICE_EPINTFLAG_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTFLAG_TRFAIL0_Pos)
#define USB_DEVICE_EPINTFLAG_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow 1 */
#define USB_DEVICE_EPINTFLAG_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTFLAG_TRFAIL1_Pos)
#define USB_DEVICE_EPINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTFLAG) Error Flow x */
#define USB_DEVICE_EPINTFLAG_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos)
#define USB_DEVICE_EPINTFLAG_TRFAIL(value) (USB_DEVICE_EPINTFLAG_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTFLAG_TRFAIL_Pos))
#define USB_DEVICE_EPINTFLAG_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTFLAG) Received Setup */
#define USB_DEVICE_EPINTFLAG_RXSTP (_U_(0x1) << USB_DEVICE_EPINTFLAG_RXSTP_Pos)
#define USB_DEVICE_EPINTFLAG_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 0 In/out */
#define USB_DEVICE_EPINTFLAG_STALL0 (_U_(1) << USB_DEVICE_EPINTFLAG_STALL0_Pos)
#define USB_DEVICE_EPINTFLAG_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTFLAG) Stall 1 In/out */
#define USB_DEVICE_EPINTFLAG_STALL1 (_U_(1) << USB_DEVICE_EPINTFLAG_STALL1_Pos)
#define USB_DEVICE_EPINTFLAG_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTFLAG) Stall x In/out */
#define USB_DEVICE_EPINTFLAG_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTFLAG_STALL_Pos)
#define USB_DEVICE_EPINTFLAG_STALL(value) (USB_DEVICE_EPINTFLAG_STALL_Msk & ((value) << USB_DEVICE_EPINTFLAG_STALL_Pos))
#define USB_DEVICE_EPINTFLAG_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTFLAG) MASK Register */
/* -------- USB_HOST_PINTFLAG : (USB Offset: 0x107) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union { // __I to avoid read-modify-write on write-to-clear register
struct {
__I uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Flag */
__I uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Flag */
__I uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Flag */
__I uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Flag */
__I uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Flag */
__I uint8_t STALL:1; /*!< bit: 5 Stall Interrupt Flag */
__I uint8_t :2; /*!< bit: 6.. 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
__I uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Flag */
__I uint8_t :6; /*!< bit: 2.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PINTFLAG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PINTFLAG_OFFSET 0x107 /**< \brief (USB_HOST_PINTFLAG offset) HOST_PIPE Pipe Interrupt Flag */
#define USB_HOST_PINTFLAG_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PINTFLAG reset_value) HOST_PIPE Pipe Interrupt Flag */
#define USB_HOST_PINTFLAG_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete 0 Interrupt Flag */
#define USB_HOST_PINTFLAG_TRCPT0 (_U_(1) << USB_HOST_PINTFLAG_TRCPT0_Pos)
#define USB_HOST_PINTFLAG_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete 1 Interrupt Flag */
#define USB_HOST_PINTFLAG_TRCPT1 (_U_(1) << USB_HOST_PINTFLAG_TRCPT1_Pos)
#define USB_HOST_PINTFLAG_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTFLAG) Transfer Complete x Interrupt Flag */
#define USB_HOST_PINTFLAG_TRCPT_Msk (_U_(0x3) << USB_HOST_PINTFLAG_TRCPT_Pos)
#define USB_HOST_PINTFLAG_TRCPT(value) (USB_HOST_PINTFLAG_TRCPT_Msk & ((value) << USB_HOST_PINTFLAG_TRCPT_Pos))
#define USB_HOST_PINTFLAG_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTFLAG) Error Flow Interrupt Flag */
#define USB_HOST_PINTFLAG_TRFAIL (_U_(0x1) << USB_HOST_PINTFLAG_TRFAIL_Pos)
#define USB_HOST_PINTFLAG_PERR_Pos 3 /**< \brief (USB_HOST_PINTFLAG) Pipe Error Interrupt Flag */
#define USB_HOST_PINTFLAG_PERR (_U_(0x1) << USB_HOST_PINTFLAG_PERR_Pos)
#define USB_HOST_PINTFLAG_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTFLAG) Transmit Setup Interrupt Flag */
#define USB_HOST_PINTFLAG_TXSTP (_U_(0x1) << USB_HOST_PINTFLAG_TXSTP_Pos)
#define USB_HOST_PINTFLAG_STALL_Pos 5 /**< \brief (USB_HOST_PINTFLAG) Stall Interrupt Flag */
#define USB_HOST_PINTFLAG_STALL (_U_(0x1) << USB_HOST_PINTFLAG_STALL_Pos)
#define USB_HOST_PINTFLAG_MASK _U_(0x3F) /**< \brief (USB_HOST_PINTFLAG) MASK Register */
/* -------- USB_DEVICE_EPINTENCLR : (USB Offset: 0x108) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Clear Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Disable */
uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Disable */
uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Disable */
uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Disable */
uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Disable */
uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/Out Interrupt Disable */
uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/Out Interrupt Disable */
uint8_t :1; /*!< bit: 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Disable */
uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Disable */
uint8_t :1; /*!< bit: 4 Reserved */
uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/Out Interrupt Disable */
uint8_t :1; /*!< bit: 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPINTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPINTENCLR_OFFSET 0x108 /**< \brief (USB_DEVICE_EPINTENCLR offset) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
#define USB_DEVICE_EPINTENCLR_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTENCLR reset_value) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
#define USB_DEVICE_EPINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 0 Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRCPT0 (_U_(1) << USB_DEVICE_EPINTENCLR_TRCPT0_Pos)
#define USB_DEVICE_EPINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete 1 Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRCPT1 (_U_(1) << USB_DEVICE_EPINTENCLR_TRCPT1_Pos)
#define USB_DEVICE_EPINTENCLR_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENCLR) Transfer Complete x Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_TRCPT_Pos)
#define USB_DEVICE_EPINTENCLR_TRCPT(value) (USB_DEVICE_EPINTENCLR_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRCPT_Pos))
#define USB_DEVICE_EPINTENCLR_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 0 Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTENCLR_TRFAIL0_Pos)
#define USB_DEVICE_EPINTENCLR_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow 1 Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTENCLR_TRFAIL1_Pos)
#define USB_DEVICE_EPINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENCLR) Error Flow x Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos)
#define USB_DEVICE_EPINTENCLR_TRFAIL(value) (USB_DEVICE_EPINTENCLR_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENCLR_TRFAIL_Pos))
#define USB_DEVICE_EPINTENCLR_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENCLR) Received Setup Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_RXSTP (_U_(0x1) << USB_DEVICE_EPINTENCLR_RXSTP_Pos)
#define USB_DEVICE_EPINTENCLR_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 0 In/Out Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_STALL0 (_U_(1) << USB_DEVICE_EPINTENCLR_STALL0_Pos)
#define USB_DEVICE_EPINTENCLR_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENCLR) Stall 1 In/Out Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_STALL1 (_U_(1) << USB_DEVICE_EPINTENCLR_STALL1_Pos)
#define USB_DEVICE_EPINTENCLR_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENCLR) Stall x In/Out Interrupt Disable */
#define USB_DEVICE_EPINTENCLR_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTENCLR_STALL_Pos)
#define USB_DEVICE_EPINTENCLR_STALL(value) (USB_DEVICE_EPINTENCLR_STALL_Msk & ((value) << USB_DEVICE_EPINTENCLR_STALL_Pos))
#define USB_DEVICE_EPINTENCLR_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTENCLR) MASK Register */
/* -------- USB_HOST_PINTENCLR : (USB Offset: 0x108) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag Clear -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Disable */
uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Disable */
uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Disable */
uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Disable */
uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Disable */
uint8_t STALL:1; /*!< bit: 5 Stall Inetrrupt Disable */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Disable */
uint8_t :6; /*!< bit: 2.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PINTENCLR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PINTENCLR_OFFSET 0x108 /**< \brief (USB_HOST_PINTENCLR offset) HOST_PIPE Pipe Interrupt Flag Clear */
#define USB_HOST_PINTENCLR_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PINTENCLR reset_value) HOST_PIPE Pipe Interrupt Flag Clear */
#define USB_HOST_PINTENCLR_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete 0 Disable */
#define USB_HOST_PINTENCLR_TRCPT0 (_U_(1) << USB_HOST_PINTENCLR_TRCPT0_Pos)
#define USB_HOST_PINTENCLR_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete 1 Disable */
#define USB_HOST_PINTENCLR_TRCPT1 (_U_(1) << USB_HOST_PINTENCLR_TRCPT1_Pos)
#define USB_HOST_PINTENCLR_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTENCLR) Transfer Complete x Disable */
#define USB_HOST_PINTENCLR_TRCPT_Msk (_U_(0x3) << USB_HOST_PINTENCLR_TRCPT_Pos)
#define USB_HOST_PINTENCLR_TRCPT(value) (USB_HOST_PINTENCLR_TRCPT_Msk & ((value) << USB_HOST_PINTENCLR_TRCPT_Pos))
#define USB_HOST_PINTENCLR_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTENCLR) Error Flow Interrupt Disable */
#define USB_HOST_PINTENCLR_TRFAIL (_U_(0x1) << USB_HOST_PINTENCLR_TRFAIL_Pos)
#define USB_HOST_PINTENCLR_PERR_Pos 3 /**< \brief (USB_HOST_PINTENCLR) Pipe Error Interrupt Disable */
#define USB_HOST_PINTENCLR_PERR (_U_(0x1) << USB_HOST_PINTENCLR_PERR_Pos)
#define USB_HOST_PINTENCLR_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTENCLR) Transmit Setup Interrupt Disable */
#define USB_HOST_PINTENCLR_TXSTP (_U_(0x1) << USB_HOST_PINTENCLR_TXSTP_Pos)
#define USB_HOST_PINTENCLR_STALL_Pos 5 /**< \brief (USB_HOST_PINTENCLR) Stall Inetrrupt Disable */
#define USB_HOST_PINTENCLR_STALL (_U_(0x1) << USB_HOST_PINTENCLR_STALL_Pos)
#define USB_HOST_PINTENCLR_MASK _U_(0x3F) /**< \brief (USB_HOST_PINTENCLR) MASK Register */
/* -------- USB_DEVICE_EPINTENSET : (USB Offset: 0x109) (R/W 8) DEVICE DEVICE_ENDPOINT End Point Interrupt Set Flag -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */
uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */
uint8_t TRFAIL0:1; /*!< bit: 2 Error Flow 0 Interrupt Enable */
uint8_t TRFAIL1:1; /*!< bit: 3 Error Flow 1 Interrupt Enable */
uint8_t RXSTP:1; /*!< bit: 4 Received Setup Interrupt Enable */
uint8_t STALL0:1; /*!< bit: 5 Stall 0 In/out Interrupt enable */
uint8_t STALL1:1; /*!< bit: 6 Stall 1 In/out Interrupt enable */
uint8_t :1; /*!< bit: 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */
uint8_t TRFAIL:2; /*!< bit: 2.. 3 Error Flow x Interrupt Enable */
uint8_t :1; /*!< bit: 4 Reserved */
uint8_t STALL:2; /*!< bit: 5.. 6 Stall x In/out Interrupt enable */
uint8_t :1; /*!< bit: 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_EPINTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EPINTENSET_OFFSET 0x109 /**< \brief (USB_DEVICE_EPINTENSET offset) DEVICE_ENDPOINT End Point Interrupt Set Flag */
#define USB_DEVICE_EPINTENSET_RESETVALUE _U_(0x00) /**< \brief (USB_DEVICE_EPINTENSET reset_value) DEVICE_ENDPOINT End Point Interrupt Set Flag */
#define USB_DEVICE_EPINTENSET_TRCPT0_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 0 Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRCPT0 (_U_(1) << USB_DEVICE_EPINTENSET_TRCPT0_Pos)
#define USB_DEVICE_EPINTENSET_TRCPT1_Pos 1 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete 1 Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRCPT1 (_U_(1) << USB_DEVICE_EPINTENSET_TRCPT1_Pos)
#define USB_DEVICE_EPINTENSET_TRCPT_Pos 0 /**< \brief (USB_DEVICE_EPINTENSET) Transfer Complete x Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRCPT_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_TRCPT_Pos)
#define USB_DEVICE_EPINTENSET_TRCPT(value) (USB_DEVICE_EPINTENSET_TRCPT_Msk & ((value) << USB_DEVICE_EPINTENSET_TRCPT_Pos))
#define USB_DEVICE_EPINTENSET_TRFAIL0_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 0 Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRFAIL0 (_U_(1) << USB_DEVICE_EPINTENSET_TRFAIL0_Pos)
#define USB_DEVICE_EPINTENSET_TRFAIL1_Pos 3 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow 1 Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRFAIL1 (_U_(1) << USB_DEVICE_EPINTENSET_TRFAIL1_Pos)
#define USB_DEVICE_EPINTENSET_TRFAIL_Pos 2 /**< \brief (USB_DEVICE_EPINTENSET) Error Flow x Interrupt Enable */
#define USB_DEVICE_EPINTENSET_TRFAIL_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_TRFAIL_Pos)
#define USB_DEVICE_EPINTENSET_TRFAIL(value) (USB_DEVICE_EPINTENSET_TRFAIL_Msk & ((value) << USB_DEVICE_EPINTENSET_TRFAIL_Pos))
#define USB_DEVICE_EPINTENSET_RXSTP_Pos 4 /**< \brief (USB_DEVICE_EPINTENSET) Received Setup Interrupt Enable */
#define USB_DEVICE_EPINTENSET_RXSTP (_U_(0x1) << USB_DEVICE_EPINTENSET_RXSTP_Pos)
#define USB_DEVICE_EPINTENSET_STALL0_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall 0 In/out Interrupt enable */
#define USB_DEVICE_EPINTENSET_STALL0 (_U_(1) << USB_DEVICE_EPINTENSET_STALL0_Pos)
#define USB_DEVICE_EPINTENSET_STALL1_Pos 6 /**< \brief (USB_DEVICE_EPINTENSET) Stall 1 In/out Interrupt enable */
#define USB_DEVICE_EPINTENSET_STALL1 (_U_(1) << USB_DEVICE_EPINTENSET_STALL1_Pos)
#define USB_DEVICE_EPINTENSET_STALL_Pos 5 /**< \brief (USB_DEVICE_EPINTENSET) Stall x In/out Interrupt enable */
#define USB_DEVICE_EPINTENSET_STALL_Msk (_U_(0x3) << USB_DEVICE_EPINTENSET_STALL_Pos)
#define USB_DEVICE_EPINTENSET_STALL(value) (USB_DEVICE_EPINTENSET_STALL_Msk & ((value) << USB_DEVICE_EPINTENSET_STALL_Pos))
#define USB_DEVICE_EPINTENSET_MASK _U_(0x7F) /**< \brief (USB_DEVICE_EPINTENSET) MASK Register */
/* -------- USB_HOST_PINTENSET : (USB Offset: 0x109) (R/W 8) HOST HOST_PIPE Pipe Interrupt Flag Set -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t TRCPT0:1; /*!< bit: 0 Transfer Complete 0 Interrupt Enable */
uint8_t TRCPT1:1; /*!< bit: 1 Transfer Complete 1 Interrupt Enable */
uint8_t TRFAIL:1; /*!< bit: 2 Error Flow Interrupt Enable */
uint8_t PERR:1; /*!< bit: 3 Pipe Error Interrupt Enable */
uint8_t TXSTP:1; /*!< bit: 4 Transmit Setup Interrupt Enable */
uint8_t STALL:1; /*!< bit: 5 Stall Interrupt Enable */
uint8_t :2; /*!< bit: 6.. 7 Reserved */
} bit; /*!< Structure used for bit access */
struct {
uint8_t TRCPT:2; /*!< bit: 0.. 1 Transfer Complete x Interrupt Enable */
uint8_t :6; /*!< bit: 2.. 7 Reserved */
} vec; /*!< Structure used for vec access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_PINTENSET_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PINTENSET_OFFSET 0x109 /**< \brief (USB_HOST_PINTENSET offset) HOST_PIPE Pipe Interrupt Flag Set */
#define USB_HOST_PINTENSET_RESETVALUE _U_(0x00) /**< \brief (USB_HOST_PINTENSET reset_value) HOST_PIPE Pipe Interrupt Flag Set */
#define USB_HOST_PINTENSET_TRCPT0_Pos 0 /**< \brief (USB_HOST_PINTENSET) Transfer Complete 0 Interrupt Enable */
#define USB_HOST_PINTENSET_TRCPT0 (_U_(1) << USB_HOST_PINTENSET_TRCPT0_Pos)
#define USB_HOST_PINTENSET_TRCPT1_Pos 1 /**< \brief (USB_HOST_PINTENSET) Transfer Complete 1 Interrupt Enable */
#define USB_HOST_PINTENSET_TRCPT1 (_U_(1) << USB_HOST_PINTENSET_TRCPT1_Pos)
#define USB_HOST_PINTENSET_TRCPT_Pos 0 /**< \brief (USB_HOST_PINTENSET) Transfer Complete x Interrupt Enable */
#define USB_HOST_PINTENSET_TRCPT_Msk (_U_(0x3) << USB_HOST_PINTENSET_TRCPT_Pos)
#define USB_HOST_PINTENSET_TRCPT(value) (USB_HOST_PINTENSET_TRCPT_Msk & ((value) << USB_HOST_PINTENSET_TRCPT_Pos))
#define USB_HOST_PINTENSET_TRFAIL_Pos 2 /**< \brief (USB_HOST_PINTENSET) Error Flow Interrupt Enable */
#define USB_HOST_PINTENSET_TRFAIL (_U_(0x1) << USB_HOST_PINTENSET_TRFAIL_Pos)
#define USB_HOST_PINTENSET_PERR_Pos 3 /**< \brief (USB_HOST_PINTENSET) Pipe Error Interrupt Enable */
#define USB_HOST_PINTENSET_PERR (_U_(0x1) << USB_HOST_PINTENSET_PERR_Pos)
#define USB_HOST_PINTENSET_TXSTP_Pos 4 /**< \brief (USB_HOST_PINTENSET) Transmit Setup Interrupt Enable */
#define USB_HOST_PINTENSET_TXSTP (_U_(0x1) << USB_HOST_PINTENSET_TXSTP_Pos)
#define USB_HOST_PINTENSET_STALL_Pos 5 /**< \brief (USB_HOST_PINTENSET) Stall Interrupt Enable */
#define USB_HOST_PINTENSET_STALL (_U_(0x1) << USB_HOST_PINTENSET_STALL_Pos)
#define USB_HOST_PINTENSET_MASK _U_(0x3F) /**< \brief (USB_HOST_PINTENSET) MASK Register */
/* -------- USB_DEVICE_ADDR : (USB Offset: 0x000) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} USB_DEVICE_ADDR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_ADDR_OFFSET 0x000 /**< \brief (USB_DEVICE_ADDR offset) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
#define USB_DEVICE_ADDR_ADDR_Pos 0 /**< \brief (USB_DEVICE_ADDR) Adress of data buffer */
#define USB_DEVICE_ADDR_ADDR_Msk (_U_(0xFFFFFFFF) << USB_DEVICE_ADDR_ADDR_Pos)
#define USB_DEVICE_ADDR_ADDR(value) (USB_DEVICE_ADDR_ADDR_Msk & ((value) << USB_DEVICE_ADDR_ADDR_Pos))
#define USB_DEVICE_ADDR_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DEVICE_ADDR) MASK Register */
/* -------- USB_HOST_ADDR : (USB Offset: 0x000) (R/W 32) HOST HOST_DESC_BANK Host Bank, Adress of Data Buffer -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t ADDR:32; /*!< bit: 0..31 Adress of data buffer */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} USB_HOST_ADDR_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_ADDR_OFFSET 0x000 /**< \brief (USB_HOST_ADDR offset) HOST_DESC_BANK Host Bank, Adress of Data Buffer */
#define USB_HOST_ADDR_ADDR_Pos 0 /**< \brief (USB_HOST_ADDR) Adress of data buffer */
#define USB_HOST_ADDR_ADDR_Msk (_U_(0xFFFFFFFF) << USB_HOST_ADDR_ADDR_Pos)
#define USB_HOST_ADDR_ADDR(value) (USB_HOST_ADDR_ADDR_Msk & ((value) << USB_HOST_ADDR_ADDR_Pos))
#define USB_HOST_ADDR_MASK _U_(0xFFFFFFFF) /**< \brief (USB_HOST_ADDR) MASK Register */
/* -------- USB_DEVICE_PCKSIZE : (USB Offset: 0x004) (R/W 32) DEVICE DEVICE_DESC_BANK Endpoint Bank, Packet Size -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */
uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */
uint32_t SIZE:3; /*!< bit: 28..30 Enpoint size */
uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} USB_DEVICE_PCKSIZE_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_PCKSIZE_OFFSET 0x004 /**< \brief (USB_DEVICE_PCKSIZE offset) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_DEVICE_PCKSIZE) Byte Count */
#define USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk (_U_(0x3FFF) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos)
#define USB_DEVICE_PCKSIZE_BYTE_COUNT(value) (USB_DEVICE_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_DEVICE_PCKSIZE_BYTE_COUNT_Pos))
#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_DEVICE_PCKSIZE) Multi Packet In or Out size */
#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk (_U_(0x3FFF) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos)
#define USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE(value) (USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_MULTI_PACKET_SIZE_Pos))
#define USB_DEVICE_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_DEVICE_PCKSIZE) Enpoint size */
#define USB_DEVICE_PCKSIZE_SIZE_Msk (_U_(0x7) << USB_DEVICE_PCKSIZE_SIZE_Pos)
#define USB_DEVICE_PCKSIZE_SIZE(value) (USB_DEVICE_PCKSIZE_SIZE_Msk & ((value) << USB_DEVICE_PCKSIZE_SIZE_Pos))
#define USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_DEVICE_PCKSIZE) Automatic Zero Length Packet */
#define USB_DEVICE_PCKSIZE_AUTO_ZLP (_U_(0x1) << USB_DEVICE_PCKSIZE_AUTO_ZLP_Pos)
#define USB_DEVICE_PCKSIZE_MASK _U_(0xFFFFFFFF) /**< \brief (USB_DEVICE_PCKSIZE) MASK Register */
/* -------- USB_HOST_PCKSIZE : (USB Offset: 0x004) (R/W 32) HOST HOST_DESC_BANK Host Bank, Packet Size -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint32_t BYTE_COUNT:14; /*!< bit: 0..13 Byte Count */
uint32_t MULTI_PACKET_SIZE:14; /*!< bit: 14..27 Multi Packet In or Out size */
uint32_t SIZE:3; /*!< bit: 28..30 Pipe size */
uint32_t AUTO_ZLP:1; /*!< bit: 31 Automatic Zero Length Packet */
} bit; /*!< Structure used for bit access */
uint32_t reg; /*!< Type used for register access */
} USB_HOST_PCKSIZE_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_PCKSIZE_OFFSET 0x004 /**< \brief (USB_HOST_PCKSIZE offset) HOST_DESC_BANK Host Bank, Packet Size */
#define USB_HOST_PCKSIZE_BYTE_COUNT_Pos 0 /**< \brief (USB_HOST_PCKSIZE) Byte Count */
#define USB_HOST_PCKSIZE_BYTE_COUNT_Msk (_U_(0x3FFF) << USB_HOST_PCKSIZE_BYTE_COUNT_Pos)
#define USB_HOST_PCKSIZE_BYTE_COUNT(value) (USB_HOST_PCKSIZE_BYTE_COUNT_Msk & ((value) << USB_HOST_PCKSIZE_BYTE_COUNT_Pos))
#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos 14 /**< \brief (USB_HOST_PCKSIZE) Multi Packet In or Out size */
#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Msk (_U_(0x3FFF) << USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos)
#define USB_HOST_PCKSIZE_MULTI_PACKET_SIZE(value) (USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Msk & ((value) << USB_HOST_PCKSIZE_MULTI_PACKET_SIZE_Pos))
#define USB_HOST_PCKSIZE_SIZE_Pos 28 /**< \brief (USB_HOST_PCKSIZE) Pipe size */
#define USB_HOST_PCKSIZE_SIZE_Msk (_U_(0x7) << USB_HOST_PCKSIZE_SIZE_Pos)
#define USB_HOST_PCKSIZE_SIZE(value) (USB_HOST_PCKSIZE_SIZE_Msk & ((value) << USB_HOST_PCKSIZE_SIZE_Pos))
#define USB_HOST_PCKSIZE_AUTO_ZLP_Pos 31 /**< \brief (USB_HOST_PCKSIZE) Automatic Zero Length Packet */
#define USB_HOST_PCKSIZE_AUTO_ZLP (_U_(0x1) << USB_HOST_PCKSIZE_AUTO_ZLP_Pos)
#define USB_HOST_PCKSIZE_MASK _U_(0xFFFFFFFF) /**< \brief (USB_HOST_PCKSIZE) MASK Register */
/* -------- USB_DEVICE_EXTREG : (USB Offset: 0x008) (R/W 16) DEVICE DEVICE_DESC_BANK Endpoint Bank, Extended -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */
uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */
uint16_t :1; /*!< bit: 15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_DEVICE_EXTREG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_EXTREG_OFFSET 0x008 /**< \brief (USB_DEVICE_EXTREG offset) DEVICE_DESC_BANK Endpoint Bank, Extended */
#define USB_DEVICE_EXTREG_SUBPID_Pos 0 /**< \brief (USB_DEVICE_EXTREG) SUBPID field send with extended token */
#define USB_DEVICE_EXTREG_SUBPID_Msk (_U_(0xF) << USB_DEVICE_EXTREG_SUBPID_Pos)
#define USB_DEVICE_EXTREG_SUBPID(value) (USB_DEVICE_EXTREG_SUBPID_Msk & ((value) << USB_DEVICE_EXTREG_SUBPID_Pos))
#define USB_DEVICE_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_DEVICE_EXTREG) Variable field send with extended token */
#define USB_DEVICE_EXTREG_VARIABLE_Msk (_U_(0x7FF) << USB_DEVICE_EXTREG_VARIABLE_Pos)
#define USB_DEVICE_EXTREG_VARIABLE(value) (USB_DEVICE_EXTREG_VARIABLE_Msk & ((value) << USB_DEVICE_EXTREG_VARIABLE_Pos))
#define USB_DEVICE_EXTREG_MASK _U_(0x7FFF) /**< \brief (USB_DEVICE_EXTREG) MASK Register */
/* -------- USB_HOST_EXTREG : (USB Offset: 0x008) (R/W 16) HOST HOST_DESC_BANK Host Bank, Extended -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t SUBPID:4; /*!< bit: 0.. 3 SUBPID field send with extended token */
uint16_t VARIABLE:11; /*!< bit: 4..14 Variable field send with extended token */
uint16_t :1; /*!< bit: 15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_EXTREG_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_EXTREG_OFFSET 0x008 /**< \brief (USB_HOST_EXTREG offset) HOST_DESC_BANK Host Bank, Extended */
#define USB_HOST_EXTREG_SUBPID_Pos 0 /**< \brief (USB_HOST_EXTREG) SUBPID field send with extended token */
#define USB_HOST_EXTREG_SUBPID_Msk (_U_(0xF) << USB_HOST_EXTREG_SUBPID_Pos)
#define USB_HOST_EXTREG_SUBPID(value) (USB_HOST_EXTREG_SUBPID_Msk & ((value) << USB_HOST_EXTREG_SUBPID_Pos))
#define USB_HOST_EXTREG_VARIABLE_Pos 4 /**< \brief (USB_HOST_EXTREG) Variable field send with extended token */
#define USB_HOST_EXTREG_VARIABLE_Msk (_U_(0x7FF) << USB_HOST_EXTREG_VARIABLE_Pos)
#define USB_HOST_EXTREG_VARIABLE(value) (USB_HOST_EXTREG_VARIABLE_Msk & ((value) << USB_HOST_EXTREG_VARIABLE_Pos))
#define USB_HOST_EXTREG_MASK _U_(0x7FFF) /**< \brief (USB_HOST_EXTREG) MASK Register */
/* -------- USB_DEVICE_STATUS_BK : (USB Offset: 0x00A) (R/W 8) DEVICE DEVICE_DESC_BANK Enpoint Bank, Status of Bank -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */
uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */
uint8_t :6; /*!< bit: 2.. 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_DEVICE_STATUS_BK_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_DEVICE_STATUS_BK_OFFSET 0x00A /**< \brief (USB_DEVICE_STATUS_BK offset) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
#define USB_DEVICE_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_DEVICE_STATUS_BK) CRC Error Status */
#define USB_DEVICE_STATUS_BK_CRCERR (_U_(0x1) << USB_DEVICE_STATUS_BK_CRCERR_Pos)
#define USB_DEVICE_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_DEVICE_STATUS_BK) Error Flow Status */
#define USB_DEVICE_STATUS_BK_ERRORFLOW (_U_(0x1) << USB_DEVICE_STATUS_BK_ERRORFLOW_Pos)
#define USB_DEVICE_STATUS_BK_MASK _U_(0x03) /**< \brief (USB_DEVICE_STATUS_BK) MASK Register */
/* -------- USB_HOST_STATUS_BK : (USB Offset: 0x00A) (R/W 8) HOST HOST_DESC_BANK Host Bank, Status of Bank -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint8_t CRCERR:1; /*!< bit: 0 CRC Error Status */
uint8_t ERRORFLOW:1; /*!< bit: 1 Error Flow Status */
uint8_t :6; /*!< bit: 2.. 7 Reserved */
} bit; /*!< Structure used for bit access */
uint8_t reg; /*!< Type used for register access */
} USB_HOST_STATUS_BK_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_STATUS_BK_OFFSET 0x00A /**< \brief (USB_HOST_STATUS_BK offset) HOST_DESC_BANK Host Bank, Status of Bank */
#define USB_HOST_STATUS_BK_CRCERR_Pos 0 /**< \brief (USB_HOST_STATUS_BK) CRC Error Status */
#define USB_HOST_STATUS_BK_CRCERR (_U_(0x1) << USB_HOST_STATUS_BK_CRCERR_Pos)
#define USB_HOST_STATUS_BK_ERRORFLOW_Pos 1 /**< \brief (USB_HOST_STATUS_BK) Error Flow Status */
#define USB_HOST_STATUS_BK_ERRORFLOW (_U_(0x1) << USB_HOST_STATUS_BK_ERRORFLOW_Pos)
#define USB_HOST_STATUS_BK_MASK _U_(0x03) /**< \brief (USB_HOST_STATUS_BK) MASK Register */
/* -------- USB_HOST_CTRL_PIPE : (USB Offset: 0x00C) (R/W 16) HOST HOST_DESC_BANK Host Bank, Host Control Pipe -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t PDADDR:7; /*!< bit: 0.. 6 Pipe Device Adress */
uint16_t :1; /*!< bit: 7 Reserved */
uint16_t PEPNUM:4; /*!< bit: 8..11 Pipe Endpoint Number */
uint16_t PERMAX:4; /*!< bit: 12..15 Pipe Error Max Number */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_CTRL_PIPE_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_CTRL_PIPE_OFFSET 0x00C /**< \brief (USB_HOST_CTRL_PIPE offset) HOST_DESC_BANK Host Bank, Host Control Pipe */
#define USB_HOST_CTRL_PIPE_RESETVALUE _U_(0x0000) /**< \brief (USB_HOST_CTRL_PIPE reset_value) HOST_DESC_BANK Host Bank, Host Control Pipe */
#define USB_HOST_CTRL_PIPE_PDADDR_Pos 0 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Device Adress */
#define USB_HOST_CTRL_PIPE_PDADDR_Msk (_U_(0x7F) << USB_HOST_CTRL_PIPE_PDADDR_Pos)
#define USB_HOST_CTRL_PIPE_PDADDR(value) (USB_HOST_CTRL_PIPE_PDADDR_Msk & ((value) << USB_HOST_CTRL_PIPE_PDADDR_Pos))
#define USB_HOST_CTRL_PIPE_PEPNUM_Pos 8 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Endpoint Number */
#define USB_HOST_CTRL_PIPE_PEPNUM_Msk (_U_(0xF) << USB_HOST_CTRL_PIPE_PEPNUM_Pos)
#define USB_HOST_CTRL_PIPE_PEPNUM(value) (USB_HOST_CTRL_PIPE_PEPNUM_Msk & ((value) << USB_HOST_CTRL_PIPE_PEPNUM_Pos))
#define USB_HOST_CTRL_PIPE_PERMAX_Pos 12 /**< \brief (USB_HOST_CTRL_PIPE) Pipe Error Max Number */
#define USB_HOST_CTRL_PIPE_PERMAX_Msk (_U_(0xF) << USB_HOST_CTRL_PIPE_PERMAX_Pos)
#define USB_HOST_CTRL_PIPE_PERMAX(value) (USB_HOST_CTRL_PIPE_PERMAX_Msk & ((value) << USB_HOST_CTRL_PIPE_PERMAX_Pos))
#define USB_HOST_CTRL_PIPE_MASK _U_(0xFF7F) /**< \brief (USB_HOST_CTRL_PIPE) MASK Register */
/* -------- USB_HOST_STATUS_PIPE : (USB Offset: 0x00E) (R/W 16) HOST HOST_DESC_BANK Host Bank, Host Status Pipe -------- */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
struct {
uint16_t DTGLER:1; /*!< bit: 0 Data Toggle Error */
uint16_t DAPIDER:1; /*!< bit: 1 Data PID Error */
uint16_t PIDER:1; /*!< bit: 2 PID Error */
uint16_t TOUTER:1; /*!< bit: 3 Time Out Error */
uint16_t CRC16ER:1; /*!< bit: 4 CRC16 Error */
uint16_t ERCNT:3; /*!< bit: 5.. 7 Pipe Error Count */
uint16_t :8; /*!< bit: 8..15 Reserved */
} bit; /*!< Structure used for bit access */
uint16_t reg; /*!< Type used for register access */
} USB_HOST_STATUS_PIPE_Type;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define USB_HOST_STATUS_PIPE_OFFSET 0x00E /**< \brief (USB_HOST_STATUS_PIPE offset) HOST_DESC_BANK Host Bank, Host Status Pipe */
#define USB_HOST_STATUS_PIPE_DTGLER_Pos 0 /**< \brief (USB_HOST_STATUS_PIPE) Data Toggle Error */
#define USB_HOST_STATUS_PIPE_DTGLER (_U_(0x1) << USB_HOST_STATUS_PIPE_DTGLER_Pos)
#define USB_HOST_STATUS_PIPE_DAPIDER_Pos 1 /**< \brief (USB_HOST_STATUS_PIPE) Data PID Error */
#define USB_HOST_STATUS_PIPE_DAPIDER (_U_(0x1) << USB_HOST_STATUS_PIPE_DAPIDER_Pos)
#define USB_HOST_STATUS_PIPE_PIDER_Pos 2 /**< \brief (USB_HOST_STATUS_PIPE) PID Error */
#define USB_HOST_STATUS_PIPE_PIDER (_U_(0x1) << USB_HOST_STATUS_PIPE_PIDER_Pos)
#define USB_HOST_STATUS_PIPE_TOUTER_Pos 3 /**< \brief (USB_HOST_STATUS_PIPE) Time Out Error */
#define USB_HOST_STATUS_PIPE_TOUTER (_U_(0x1) << USB_HOST_STATUS_PIPE_TOUTER_Pos)
#define USB_HOST_STATUS_PIPE_CRC16ER_Pos 4 /**< \brief (USB_HOST_STATUS_PIPE) CRC16 Error */
#define USB_HOST_STATUS_PIPE_CRC16ER (_U_(0x1) << USB_HOST_STATUS_PIPE_CRC16ER_Pos)
#define USB_HOST_STATUS_PIPE_ERCNT_Pos 5 /**< \brief (USB_HOST_STATUS_PIPE) Pipe Error Count */
#define USB_HOST_STATUS_PIPE_ERCNT_Msk (_U_(0x7) << USB_HOST_STATUS_PIPE_ERCNT_Pos)
#define USB_HOST_STATUS_PIPE_ERCNT(value) (USB_HOST_STATUS_PIPE_ERCNT_Msk & ((value) << USB_HOST_STATUS_PIPE_ERCNT_Pos))
#define USB_HOST_STATUS_PIPE_MASK _U_(0x00FF) /**< \brief (USB_HOST_STATUS_PIPE) MASK Register */
/** \brief UsbDeviceDescBank SRAM registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO USB_DEVICE_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Adress of Data Buffer */
__IO USB_DEVICE_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) DEVICE_DESC_BANK Endpoint Bank, Packet Size */
__IO USB_DEVICE_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) DEVICE_DESC_BANK Endpoint Bank, Extended */
__IO USB_DEVICE_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) DEVICE_DESC_BANK Enpoint Bank, Status of Bank */
RoReg8 Reserved1[0x5];
} UsbDeviceDescBank;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief UsbHostDescBank SRAM registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO USB_HOST_ADDR_Type ADDR; /**< \brief Offset: 0x000 (R/W 32) HOST_DESC_BANK Host Bank, Adress of Data Buffer */
__IO USB_HOST_PCKSIZE_Type PCKSIZE; /**< \brief Offset: 0x004 (R/W 32) HOST_DESC_BANK Host Bank, Packet Size */
__IO USB_HOST_EXTREG_Type EXTREG; /**< \brief Offset: 0x008 (R/W 16) HOST_DESC_BANK Host Bank, Extended */
__IO USB_HOST_STATUS_BK_Type STATUS_BK; /**< \brief Offset: 0x00A (R/W 8) HOST_DESC_BANK Host Bank, Status of Bank */
RoReg8 Reserved1[0x1];
__IO USB_HOST_CTRL_PIPE_Type CTRL_PIPE; /**< \brief Offset: 0x00C (R/W 16) HOST_DESC_BANK Host Bank, Host Control Pipe */
__IO USB_HOST_STATUS_PIPE_Type STATUS_PIPE; /**< \brief Offset: 0x00E (R/W 16) HOST_DESC_BANK Host Bank, Host Status Pipe */
} UsbHostDescBank;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief UsbDeviceEndpoint hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO USB_DEVICE_EPCFG_Type EPCFG; /**< \brief Offset: 0x000 (R/W 8) DEVICE_ENDPOINT End Point Configuration */
RoReg8 Reserved1[0x3];
__O USB_DEVICE_EPSTATUSCLR_Type EPSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Clear */
__O USB_DEVICE_EPSTATUSSET_Type EPSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) DEVICE_ENDPOINT End Point Pipe Status Set */
__I USB_DEVICE_EPSTATUS_Type EPSTATUS; /**< \brief Offset: 0x006 (R/ 8) DEVICE_ENDPOINT End Point Pipe Status */
__IO USB_DEVICE_EPINTFLAG_Type EPINTFLAG; /**< \brief Offset: 0x007 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Flag */
__IO USB_DEVICE_EPINTENCLR_Type EPINTENCLR; /**< \brief Offset: 0x008 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Clear Flag */
__IO USB_DEVICE_EPINTENSET_Type EPINTENSET; /**< \brief Offset: 0x009 (R/W 8) DEVICE_ENDPOINT End Point Interrupt Set Flag */
RoReg8 Reserved2[0x16];
} UsbDeviceEndpoint;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief UsbHostPipe hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct {
__IO USB_HOST_PCFG_Type PCFG; /**< \brief Offset: 0x000 (R/W 8) HOST_PIPE End Point Configuration */
RoReg8 Reserved1[0x2];
__IO USB_HOST_BINTERVAL_Type BINTERVAL; /**< \brief Offset: 0x003 (R/W 8) HOST_PIPE Bus Access Period of Pipe */
__O USB_HOST_PSTATUSCLR_Type PSTATUSCLR; /**< \brief Offset: 0x004 ( /W 8) HOST_PIPE End Point Pipe Status Clear */
__O USB_HOST_PSTATUSSET_Type PSTATUSSET; /**< \brief Offset: 0x005 ( /W 8) HOST_PIPE End Point Pipe Status Set */
__I USB_HOST_PSTATUS_Type PSTATUS; /**< \brief Offset: 0x006 (R/ 8) HOST_PIPE End Point Pipe Status */
__IO USB_HOST_PINTFLAG_Type PINTFLAG; /**< \brief Offset: 0x007 (R/W 8) HOST_PIPE Pipe Interrupt Flag */
__IO USB_HOST_PINTENCLR_Type PINTENCLR; /**< \brief Offset: 0x008 (R/W 8) HOST_PIPE Pipe Interrupt Flag Clear */
__IO USB_HOST_PINTENSET_Type PINTENSET; /**< \brief Offset: 0x009 (R/W 8) HOST_PIPE Pipe Interrupt Flag Set */
RoReg8 Reserved2[0x16];
} UsbHostPipe;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief USB_DEVICE APB hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct { /* USB is Device */
__IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */
RoReg8 Reserved1[0x1];
__I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */
__IO USB_QOSCTRL_Type QOSCTRL; /**< \brief Offset: 0x003 (R/W 8) USB Quality Of Service */
RoReg8 Reserved2[0x4];
__IO USB_DEVICE_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) DEVICE Control B */
__IO USB_DEVICE_DADD_Type DADD; /**< \brief Offset: 0x00A (R/W 8) DEVICE Device Address */
RoReg8 Reserved3[0x1];
__I USB_DEVICE_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/ 8) DEVICE Status */
__I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */
RoReg8 Reserved4[0x2];
__I USB_DEVICE_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/ 16) DEVICE Device Frame Number */
RoReg8 Reserved5[0x2];
__IO USB_DEVICE_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) DEVICE Device Interrupt Enable Clear */
RoReg8 Reserved6[0x2];
__IO USB_DEVICE_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) DEVICE Device Interrupt Enable Set */
RoReg8 Reserved7[0x2];
__IO USB_DEVICE_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) DEVICE Device Interrupt Flag */
RoReg8 Reserved8[0x2];
__I USB_DEVICE_EPINTSMRY_Type EPINTSMRY; /**< \brief Offset: 0x020 (R/ 16) DEVICE End Point Interrupt Summary */
RoReg8 Reserved9[0x2];
__IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */
__IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */
RoReg8 Reserved10[0xD6];
UsbDeviceEndpoint DeviceEndpoint[8]; /**< \brief Offset: 0x100 UsbDeviceEndpoint groups [EPT_NUM] */
} UsbDevice;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief USB_HOST hardware registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct { /* USB is Host */
__IO USB_CTRLA_Type CTRLA; /**< \brief Offset: 0x000 (R/W 8) Control A */
RoReg8 Reserved1[0x1];
__I USB_SYNCBUSY_Type SYNCBUSY; /**< \brief Offset: 0x002 (R/ 8) Synchronization Busy */
__IO USB_QOSCTRL_Type QOSCTRL; /**< \brief Offset: 0x003 (R/W 8) USB Quality Of Service */
RoReg8 Reserved2[0x4];
__IO USB_HOST_CTRLB_Type CTRLB; /**< \brief Offset: 0x008 (R/W 16) HOST Control B */
__IO USB_HOST_HSOFC_Type HSOFC; /**< \brief Offset: 0x00A (R/W 8) HOST Host Start Of Frame Control */
RoReg8 Reserved3[0x1];
__IO USB_HOST_STATUS_Type STATUS; /**< \brief Offset: 0x00C (R/W 8) HOST Status */
__I USB_FSMSTATUS_Type FSMSTATUS; /**< \brief Offset: 0x00D (R/ 8) Finite State Machine Status */
RoReg8 Reserved4[0x2];
__IO USB_HOST_FNUM_Type FNUM; /**< \brief Offset: 0x010 (R/W 16) HOST Host Frame Number */
__I USB_HOST_FLENHIGH_Type FLENHIGH; /**< \brief Offset: 0x012 (R/ 8) HOST Host Frame Length */
RoReg8 Reserved5[0x1];
__IO USB_HOST_INTENCLR_Type INTENCLR; /**< \brief Offset: 0x014 (R/W 16) HOST Host Interrupt Enable Clear */
RoReg8 Reserved6[0x2];
__IO USB_HOST_INTENSET_Type INTENSET; /**< \brief Offset: 0x018 (R/W 16) HOST Host Interrupt Enable Set */
RoReg8 Reserved7[0x2];
__IO USB_HOST_INTFLAG_Type INTFLAG; /**< \brief Offset: 0x01C (R/W 16) HOST Host Interrupt Flag */
RoReg8 Reserved8[0x2];
__I USB_HOST_PINTSMRY_Type PINTSMRY; /**< \brief Offset: 0x020 (R/ 16) HOST Pipe Interrupt Summary */
RoReg8 Reserved9[0x2];
__IO USB_DESCADD_Type DESCADD; /**< \brief Offset: 0x024 (R/W 32) Descriptor Address */
__IO USB_PADCAL_Type PADCAL; /**< \brief Offset: 0x028 (R/W 16) USB PAD Calibration */
RoReg8 Reserved10[0xD6];
UsbHostPipe HostPipe[8]; /**< \brief Offset: 0x100 UsbHostPipe groups [PIPE_NUM*HOST_IMPLEMENTED] */
} UsbHost;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief USB_DEVICE Descriptor SRAM registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct { /* USB is Device */
UsbDeviceDescBank DeviceDescBank[2]; /**< \brief Offset: 0x000 UsbDeviceDescBank groups */
} UsbDeviceDescriptor;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/** \brief USB_HOST Descriptor SRAM registers */
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef struct { /* USB is Host */
UsbHostDescBank HostDescBank[2]; /**< \brief Offset: 0x000 UsbHostDescBank groups [2*HOST_IMPLEMENTED] */
} UsbHostDescriptor;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
#define SECTION_USB_DESCRIPTOR
#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
typedef union {
UsbDevice DEVICE; /**< \brief Offset: 0x000 USB is Device */
UsbHost HOST; /**< \brief Offset: 0x000 USB is Host */
} Usb;
#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
/*@}*/
lib: Add atmel same51 and same54 build definitions This also replaces the samd51 component files with the definitions from the same54 repository. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
2022-09-29 12:17:20 -04:00
#endif /* _SAME54_USB_COMPONENT_ */
Reference in New Issue Copy Permalink