klipper/klippy/extras/homing.py

# Helper code for implementing homing operations
#
# Copyright (C) 2016-2021  Kevin O'Connor <kevin@koconnor.net>
#
# This file may be distributed under the terms of the GNU GPLv3 license.
import logging, math

HOMING_START_DELAY = 0.001
ENDSTOP_SAMPLE_TIME = .000015
ENDSTOP_SAMPLE_COUNT = 4

# Return a completion that completes when all completions in a list complete
def multi_complete(printer, completions):
    if len(completions) == 1:
        return completions[0]
    # Build completion that waits for all completions
    reactor = printer.get_reactor()
    cp = reactor.register_callback(lambda e: [c.wait() for c in completions])
    # If any completion indicates an error, then exit main completion early
    for c in completions:
        reactor.register_callback(lambda e: cp.complete(1) if c.wait() else 0)
    return cp

# Tracking of stepper positions during a homing/probing move
class StepperPosition:
    def __init__(self, stepper, endstop_name):
        self.stepper = stepper
        self.endstop_name = endstop_name
        self.stepper_name = stepper.get_name()
        self.start_pos = stepper.get_mcu_position()
        self.halt_pos = self.trig_pos = None
    def note_home_end(self, trigger_time):
        self.halt_pos = self.stepper.get_mcu_position()
        self.trig_pos = self.stepper.get_past_mcu_position(trigger_time)

# Implementation of homing/probing moves
class HomingMove:
    def __init__(self, printer, endstops, toolhead=None):
        self.printer = printer
        self.endstops = endstops
        if toolhead is None:
            toolhead = printer.lookup_object('toolhead')
        self.toolhead = toolhead
        self.stepper_positions = []
    def get_mcu_endstops(self):
        return [es for es, name in self.endstops]
    def _calc_endstop_rate(self, mcu_endstop, movepos, speed):
        startpos = self.toolhead.get_position()
        axes_d = [mp - sp for mp, sp in zip(movepos, startpos)]
        move_d = math.sqrt(sum([d*d for d in axes_d[:3]]))
        move_t = move_d / speed
        max_steps = max([(abs(s.calc_position_from_coord(startpos)
                              - s.calc_position_from_coord(movepos))
                          / s.get_step_dist())
                         for s in mcu_endstop.get_steppers()])
        if max_steps <= 0.:
            return .001
        return move_t / max_steps
    def calc_toolhead_pos(self, kin_spos, offsets):
        kin_spos = dict(kin_spos)
        kin = self.toolhead.get_kinematics()
        for stepper in kin.get_steppers():
            sname = stepper.get_name()
            kin_spos[sname] += offsets.get(sname, 0) * stepper.get_step_dist()
        thpos = self.toolhead.get_position()
        return list(kin.calc_position(kin_spos))[:3] + thpos[3:]
    def homing_move(self, movepos, speed, probe_pos=False,
                    triggered=True, check_triggered=True):
        # Notify start of homing/probing move
        self.printer.send_event("homing:homing_move_begin", self)
        # Note start location
        self.toolhead.flush_step_generation()
        kin = self.toolhead.get_kinematics()
        kin_spos = {s.get_name(): s.get_commanded_position()
                    for s in kin.get_steppers()}
        self.stepper_positions = [ StepperPosition(s, name)
                                   for es, name in self.endstops
                                   for s in es.get_steppers() ]
        # Start endstop checking
        print_time = self.toolhead.get_last_move_time()
        endstop_triggers = []
        for mcu_endstop, name in self.endstops:
            rest_time = self._calc_endstop_rate(mcu_endstop, movepos, speed)
            wait = mcu_endstop.home_start(print_time, ENDSTOP_SAMPLE_TIME,
                                          ENDSTOP_SAMPLE_COUNT, rest_time,
                                          triggered=triggered)
            endstop_triggers.append(wait)
        all_endstop_trigger = multi_complete(self.printer, endstop_triggers)
        self.toolhead.dwell(HOMING_START_DELAY)
        # Issue move
        error = None
        try:
            self.toolhead.drip_move(movepos, speed, all_endstop_trigger)
        except self.printer.command_error as e:
            error = "Error during homing move: %s" % (str(e),)
        # Wait for endstops to trigger
        trigger_times = {}
        move_end_print_time = self.toolhead.get_last_move_time()
        for mcu_endstop, name in self.endstops:
            trigger_time = mcu_endstop.home_wait(move_end_print_time)
            if trigger_time > 0.:
                trigger_times[name] = trigger_time
            elif trigger_time < 0. and error is None:
                error = "Communication timeout during homing %s" % (name,)
            elif check_triggered and error is None:
                error = "No trigger on %s after full movement" % (name,)
        # Determine stepper halt positions
        self.toolhead.flush_step_generation()
        for sp in self.stepper_positions:
            tt = trigger_times.get(sp.endstop_name, move_end_print_time)
            sp.note_home_end(tt)
        if probe_pos:
            halt_steps = {sp.stepper_name: sp.halt_pos - sp.start_pos
                          for sp in self.stepper_positions}
            trig_steps = {sp.stepper_name: sp.trig_pos - sp.start_pos
                          for sp in self.stepper_positions}
            haltpos = trigpos = self.calc_toolhead_pos(kin_spos, trig_steps)
            if trig_steps != halt_steps:
                haltpos = self.calc_toolhead_pos(kin_spos, halt_steps)
        else:
            haltpos = trigpos = movepos
            over_steps = {sp.stepper_name: sp.halt_pos - sp.trig_pos
                          for sp in self.stepper_positions}
            if any(over_steps.values()):
                self.toolhead.set_position(movepos)
                halt_kin_spos = {s.get_name(): s.get_commanded_position()
                                 for s in kin.get_steppers()}
                haltpos = self.calc_toolhead_pos(halt_kin_spos, over_steps)
        self.toolhead.set_position(haltpos)
        # Signal homing/probing move complete
        try:
            self.printer.send_event("homing:homing_move_end", self)
        except self.printer.command_error as e:
            if error is None:
                error = str(e)
        if error is not None:
            raise self.printer.command_error(error)
        return trigpos
    def check_no_movement(self):
        if self.printer.get_start_args().get('debuginput') is not None:
            return None
        for sp in self.stepper_positions:
            if sp.start_pos == sp.trig_pos:
                return sp.endstop_name
        return None

# State tracking of homing requests
class Homing:
    def __init__(self, printer):
        self.printer = printer
        self.toolhead = printer.lookup_object('toolhead')
        self.changed_axes = []
        self.kin_spos = {}
    def set_axes(self, axes):
        self.changed_axes = axes
    def get_axes(self):
        return self.changed_axes
    def get_stepper_trigger_positions(self):
        return self.kin_spos
    def _fill_coord(self, coord):
        # Fill in any None entries in 'coord' with current toolhead position
        thcoord = list(self.toolhead.get_position())
        for i in range(len(coord)):
            if coord[i] is not None:
                thcoord[i] = coord[i]
        return thcoord
    def set_homed_position(self, pos):
        self.toolhead.set_position(self._fill_coord(pos))
    def home_rails(self, rails, forcepos, movepos):
        # Notify of upcoming homing operation
        self.printer.send_event("homing:home_rails_begin", self, rails)
        # Alter kinematics class to think printer is at forcepos
        homing_axes = [axis for axis in range(3) if forcepos[axis] is not None]
        forcepos = self._fill_coord(forcepos)
        movepos = self._fill_coord(movepos)
        self.toolhead.set_position(forcepos, homing_axes=homing_axes)
        # Perform first home
        endstops = [es for rail in rails for es in rail.get_endstops()]
        hi = rails[0].get_homing_info()
        hmove = HomingMove(self.printer, endstops)
        hmove.homing_move(movepos, hi.speed)
        # Perform second home
        if hi.retract_dist:
            # Retract
            axes_d = [mp - fp for mp, fp in zip(movepos, forcepos)]
            move_d = math.sqrt(sum([d*d for d in axes_d[:3]]))
            retract_r = min(1., hi.retract_dist / move_d)
            retractpos = [mp - ad * retract_r
                          for mp, ad in zip(movepos, axes_d)]
            self.toolhead.move(retractpos, hi.retract_speed)
            # Home again
            forcepos = [rp - ad * retract_r
                        for rp, ad in zip(retractpos, axes_d)]
            self.toolhead.set_position(forcepos)
            hmove = HomingMove(self.printer, endstops)
            hmove.homing_move(movepos, hi.second_homing_speed)
            if hmove.check_no_movement() is not None:
                raise self.printer.command_error(
                    "Endstop %s still triggered after retract"
                    % (hmove.check_no_movement(),))
        # Signal home operation complete
        self.toolhead.flush_step_generation()
        kin = self.toolhead.get_kinematics()
        kin_spos = {s.get_name(): s.get_commanded_position()
                    for s in kin.get_steppers()}
        self.kin_spos = dict(kin_spos)
        self.printer.send_event("homing:home_rails_end", self, rails)
        if kin_spos != self.kin_spos:
            # Apply any homing offsets
            adjustpos = kin.calc_position(self.kin_spos)
            for axis in homing_axes:
                movepos[axis] = adjustpos[axis]
            self.toolhead.set_position(movepos)

class PrinterHoming:
    def __init__(self, config):
        self.printer = config.get_printer()
        # Register g-code commands
        gcode = self.printer.lookup_object('gcode')
        gcode.register_command('G28', self.cmd_G28)
    def manual_home(self, toolhead, endstops, pos, speed,
                    triggered, check_triggered):
        hmove = HomingMove(self.printer, endstops, toolhead)
        try:
            hmove.homing_move(pos, speed, triggered=triggered,
                              check_triggered=check_triggered)
        except self.printer.command_error:
            if self.printer.is_shutdown():
                raise self.printer.command_error(
                    "Homing failed due to printer shutdown")
            raise
    def probing_move(self, mcu_probe, pos, speed):
        endstops = [(mcu_probe, "probe")]
        hmove = HomingMove(self.printer, endstops)
        try:
            epos = hmove.homing_move(pos, speed, probe_pos=True)
        except self.printer.command_error:
            if self.printer.is_shutdown():
                raise self.printer.command_error(
                    "Probing failed due to printer shutdown")
            raise
        if hmove.check_no_movement() is not None:
            raise self.printer.command_error(
                "Probe triggered prior to movement")
        return epos
    def cmd_G28(self, gcmd):
        # Move to origin
        axes = []
        for pos, axis in enumerate('XYZ'):
            if gcmd.get(axis, None) is not None:
                axes.append(pos)
        if not axes:
            axes = [0, 1, 2]
        homing_state = Homing(self.printer)
        homing_state.set_axes(axes)
        kin = self.printer.lookup_object('toolhead').get_kinematics()
        try:
            kin.home(homing_state)
        except self.printer.command_error:
            if self.printer.is_shutdown():
                raise self.printer.command_error(
                    "Homing failed due to printer shutdown")
            self.printer.lookup_object('stepper_enable').motor_off()
            raise

def load_config(config):
    return PrinterHoming(config)