mirror of
				https://github.com/Klipper3d/klipper.git
				synced 2025-10-31 18:36:09 +01:00 
			
		
		
		
	
		
			
	
	
		
			431 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
		
		
			
		
	
	
			431 lines
		
	
	
		
			17 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
|  | /**
 | ||
|  |   ****************************************************************************** | ||
|  |   * @file    stm32f1xx_hal_rtc_ex.h | ||
|  |   * @author  MCD Application Team | ||
|  |   * @version V1.1.1 | ||
|  |   * @date    12-May-2017 | ||
|  |   * @brief   Header file of RTC HAL Extension module. | ||
|  |   ****************************************************************************** | ||
|  |   * @attention | ||
|  |   * | ||
|  |   * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | ||
|  |   * | ||
|  |   * Redistribution and use in source and binary forms, with or without modification, | ||
|  |   * are permitted provided that the following conditions are met: | ||
|  |   *   1. Redistributions of source code must retain the above copyright notice, | ||
|  |   *      this list of conditions and the following disclaimer. | ||
|  |   *   2. Redistributions in binary form must reproduce the above copyright notice, | ||
|  |   *      this list of conditions and the following disclaimer in the documentation | ||
|  |   *      and/or other materials provided with the distribution. | ||
|  |   *   3. Neither the name of STMicroelectronics nor the names of its contributors | ||
|  |   *      may be used to endorse or promote products derived from this software | ||
|  |   *      without specific prior written permission. | ||
|  |   * | ||
|  |   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | ||
|  |   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | ||
|  |   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | ||
|  |   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | ||
|  |   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | ||
|  |   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | ||
|  |   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | ||
|  |   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | ||
|  |   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | ||
|  |   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | ||
|  |   * | ||
|  |   ******************************************************************************   | ||
|  |   */ | ||
|  | 
 | ||
|  | /* Define to prevent recursive inclusion -------------------------------------*/ | ||
|  | #ifndef __STM32F1xx_HAL_RTC_EX_H
 | ||
|  | #define __STM32F1xx_HAL_RTC_EX_H
 | ||
|  | 
 | ||
|  | #ifdef __cplusplus
 | ||
|  |  extern "C" { | ||
|  | #endif
 | ||
|  | 
 | ||
|  | /* Includes ------------------------------------------------------------------*/ | ||
|  | #include "stm32f1xx_hal_def.h"
 | ||
|  | 
 | ||
|  | /** @addtogroup STM32F1xx_HAL_Driver
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | 
 | ||
|  | /** @addtogroup RTCEx
 | ||
|  |   * @{ | ||
|  |   */  | ||
|  | 
 | ||
|  | /** @addtogroup RTCEx_Private_Macros
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  |    | ||
|  | /** @defgroup RTCEx_Alias_For_Legacy Alias define maintained for legacy
 | ||
|  |   * @{ | ||
|  |   */  | ||
|  | #define HAL_RTCEx_TamperTimeStampIRQHandler HAL_RTCEx_TamperIRQHandler
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  |    | ||
|  | /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
 | ||
|  |   * @{ | ||
|  |   */  | ||
|  | #define IS_RTC_TAMPER(__TAMPER__) ((__TAMPER__) == RTC_TAMPER_1)
 | ||
|  | 
 | ||
|  | #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__)  (((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
 | ||
|  |                                              ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL))  | ||
|  | 
 | ||
|  | #if RTC_BKP_NUMBER > 10U
 | ||
|  | #define IS_RTC_BKP(BKP)                   (((BKP) <= (uint32_t)RTC_BKP_DR10) || (((BKP) >= (uint32_t)RTC_BKP_DR11) && ((BKP) <= (uint32_t)RTC_BKP_DR42)))
 | ||
|  | #else
 | ||
|  | #define IS_RTC_BKP(BKP)                   ((BKP) <= (uint32_t)RTC_BKP_NUMBER)
 | ||
|  | #endif
 | ||
|  | #define IS_RTC_SMOOTH_CALIB_MINUS(__VALUE__) ((__VALUE__) <= 0x0000007FU)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  |    | ||
|  | /* Exported types ------------------------------------------------------------*/  | ||
|  | /** @defgroup RTCEx_Exported_Types RTCEx Exported Types
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | /** 
 | ||
|  |   * @brief  RTC Tamper structure definition   | ||
|  |   */ | ||
|  | typedef struct  | ||
|  | { | ||
|  |   uint32_t Tamper;                      /*!< Specifies the Tamper Pin.
 | ||
|  |                                              This parameter can be a value of @ref  RTCEx_Tamper_Pins_Definitions */ | ||
|  |    | ||
|  |   uint32_t Trigger;                     /*!< Specifies the Tamper Trigger.
 | ||
|  |                                              This parameter can be a value of @ref  RTCEx_Tamper_Trigger_Definitions */ | ||
|  | 
 | ||
|  | }RTC_TamperTypeDef; | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  |    | ||
|  | /* Exported constants --------------------------------------------------------*/ | ||
|  | /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
 | ||
|  |   * @{ | ||
|  |   */  | ||
|  |    | ||
|  | /** @defgroup RTCEx_Tamper_Pins_Definitions Tamper Pins Definitions
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | #define RTC_TAMPER_1                        BKP_CR_TPE            /*!< Select tamper to be enabled (mainly for legacy purposes) */
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  | 
 | ||
|  | /** @defgroup RTCEx_Tamper_Trigger_Definitions Tamper Trigger Definitions 
 | ||
|  |   * @{ | ||
|  |   */  | ||
|  | #define RTC_TAMPERTRIGGER_LOWLEVEL          BKP_CR_TPAL           /*!< A high level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
 | ||
|  | #define RTC_TAMPERTRIGGER_HIGHLEVEL         0x00000000U           /*!< A low level on the TAMPER pin resets all data backup registers (if TPE bit is set) */
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */   | ||
|  | 
 | ||
|  | /** @defgroup RTCEx_Backup_Registers_Definitions Backup Registers Definitions 
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | #if RTC_BKP_NUMBER > 0U
 | ||
|  | #define RTC_BKP_DR1                         0x00000001U
 | ||
|  | #define RTC_BKP_DR2                         0x00000002U
 | ||
|  | #define RTC_BKP_DR3                         0x00000003U
 | ||
|  | #define RTC_BKP_DR4                         0x00000004U
 | ||
|  | #define RTC_BKP_DR5                         0x00000005U
 | ||
|  | #define RTC_BKP_DR6                         0x00000006U
 | ||
|  | #define RTC_BKP_DR7                         0x00000007U
 | ||
|  | #define RTC_BKP_DR8                         0x00000008U
 | ||
|  | #define RTC_BKP_DR9                         0x00000009U
 | ||
|  | #define RTC_BKP_DR10                        0x0000000AU
 | ||
|  | #endif /* RTC_BKP_NUMBER > 0 */
 | ||
|  |     | ||
|  | #if RTC_BKP_NUMBER > 10U
 | ||
|  | #define RTC_BKP_DR11                        0x00000010U
 | ||
|  | #define RTC_BKP_DR12                        0x00000011U
 | ||
|  | #define RTC_BKP_DR13                        0x00000012U
 | ||
|  | #define RTC_BKP_DR14                        0x00000013U
 | ||
|  | #define RTC_BKP_DR15                        0x00000014U
 | ||
|  | #define RTC_BKP_DR16                        0x00000015U
 | ||
|  | #define RTC_BKP_DR17                        0x00000016U
 | ||
|  | #define RTC_BKP_DR18                        0x00000017U
 | ||
|  | #define RTC_BKP_DR19                        0x00000018U
 | ||
|  | #define RTC_BKP_DR20                        0x00000019U
 | ||
|  | #define RTC_BKP_DR21                        0x0000001AU
 | ||
|  | #define RTC_BKP_DR22                        0x0000001BU
 | ||
|  | #define RTC_BKP_DR23                        0x0000001CU
 | ||
|  | #define RTC_BKP_DR24                        0x0000001DU
 | ||
|  | #define RTC_BKP_DR25                        0x0000001EU
 | ||
|  | #define RTC_BKP_DR26                        0x0000001FU
 | ||
|  | #define RTC_BKP_DR27                        0x00000020U
 | ||
|  | #define RTC_BKP_DR28                        0x00000021U
 | ||
|  | #define RTC_BKP_DR29                        0x00000022U
 | ||
|  | #define RTC_BKP_DR30                        0x00000023U
 | ||
|  | #define RTC_BKP_DR31                        0x00000024U
 | ||
|  | #define RTC_BKP_DR32                        0x00000025U
 | ||
|  | #define RTC_BKP_DR33                        0x00000026U
 | ||
|  | #define RTC_BKP_DR34                        0x00000027U
 | ||
|  | #define RTC_BKP_DR35                        0x00000028U
 | ||
|  | #define RTC_BKP_DR36                        0x00000029U
 | ||
|  | #define RTC_BKP_DR37                        0x0000002AU
 | ||
|  | #define RTC_BKP_DR38                        0x0000002BU
 | ||
|  | #define RTC_BKP_DR39                        0x0000002CU
 | ||
|  | #define RTC_BKP_DR40                        0x0000002DU
 | ||
|  | #define RTC_BKP_DR41                        0x0000002EU
 | ||
|  | #define RTC_BKP_DR42                        0x0000002FU
 | ||
|  | #endif /* RTC_BKP_NUMBER > 10 */
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  |    | ||
|  | /* Exported macro ------------------------------------------------------------*/ | ||
|  | /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  |    | ||
|  | /**
 | ||
|  |   * @brief  Enable the RTC Tamper interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled | ||
|  |   *          This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_TAMP1: Tamper A interrupt | ||
|  |   * @retval None | ||
|  |   */    | ||
|  | #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT(BKP->CSR, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Disable the RTC Tamper interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.  | ||
|  |   *         This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_TAMP1: Tamper A interrupt | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__)  CLEAR_BIT(BKP->CSR, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Check whether the specified RTC Tamper interrupt has been enabled or not. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg  RTC_IT_TAMP1 | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    ((((BKP->CSR) & ((__INTERRUPT__))) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Get the selected RTC Tamper's flag status. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_FLAG_TAMP1F       | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__)       ((((BKP->CSR) & (__FLAG__)) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Get the selected RTC Tamper's flag status. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Tamper interrupt sources to be checked. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg  RTC_IT_TAMP1 | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__)       ((((BKP->CSR) & (BKP_CSR_TEF)) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Clear the RTC Tamper's pending flags. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_FLAG_TAMP1F   | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__)     SET_BIT(BKP->CSR, BKP_CSR_CTE | BKP_CSR_CTI)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Enable the RTC Second interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled | ||
|  |   *          This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_SEC: Second A interrupt | ||
|  |   * @retval None | ||
|  |   */    | ||
|  | #define __HAL_RTC_SECOND_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Disable the RTC Second interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be disabled.  | ||
|  |   *         This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_SEC: Second A interrupt | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_SECOND_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Check whether the specified RTC Second interrupt has occurred or not. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Second interrupt sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_IT_SEC: Second A interrupt | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_SECOND_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)      ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Get the selected RTC Second's flag status. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. | ||
|  |   *          This parameter can be: | ||
|  |   *            @arg RTC_FLAG_SEC | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_SECOND_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Clear the RTC Second's pending flags. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Second Flag sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_FLAG_SEC | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_SECOND_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Enable the RTC Overflow interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled | ||
|  |   *          This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_OW: Overflow A interrupt | ||
|  |   * @retval None | ||
|  |   */    | ||
|  | #define __HAL_RTC_OVERFLOW_ENABLE_IT(__HANDLE__, __INTERRUPT__)  SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Disable the RTC Overflow interrupt. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be disabled.  | ||
|  |   *         This parameter can be any combination of the following values: | ||
|  |   *            @arg RTC_IT_OW: Overflow A interrupt | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_OVERFLOW_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__))
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Check whether the specified RTC Overflow interrupt has occurred or not. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __INTERRUPT__: specifies the RTC Overflow interrupt sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_IT_OW: Overflow A interrupt | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_OVERFLOW_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__)    ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__))) ) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Get the selected RTC Overflow's flag status. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. | ||
|  |   *          This parameter can be: | ||
|  |   *            @arg RTC_FLAG_OW | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_OVERFLOW_GET_FLAG(__HANDLE__, __FLAG__)        (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @brief  Clear the RTC Overflow's pending flags. | ||
|  |   * @param  __HANDLE__: specifies the RTC handle. | ||
|  |   * @param  __FLAG__: specifies the RTC Overflow Flag sources to be enabled or disabled. | ||
|  |   *         This parameter can be: | ||
|  |   *            @arg RTC_FLAG_OW | ||
|  |   * @retval None | ||
|  |   */ | ||
|  | #define __HAL_RTC_OVERFLOW_CLEAR_FLAG(__HANDLE__, __FLAG__)      ((__HANDLE__)->Instance->CRL) = ~(__FLAG__)
 | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  | 
 | ||
|  | /* Exported functions --------------------------------------------------------*/ | ||
|  | /** @addtogroup RTCEx_Exported_Functions
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  |    | ||
|  | /* RTC Tamper functions *****************************************/ | ||
|  | /** @addtogroup RTCEx_Exported_Functions_Group1
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | ||
|  | HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | ||
|  | HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); | ||
|  | void              HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); | ||
|  | void              HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); | ||
|  | HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  |    | ||
|  | /* RTC Second functions *****************************************/ | ||
|  | /** @addtogroup RTCEx_Exported_Functions_Group2
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | HAL_StatusTypeDef HAL_RTCEx_SetSecond_IT(RTC_HandleTypeDef *hrtc); | ||
|  | HAL_StatusTypeDef HAL_RTCEx_DeactivateSecond(RTC_HandleTypeDef *hrtc); | ||
|  | void              HAL_RTCEx_RTCIRQHandler(RTC_HandleTypeDef* hrtc); | ||
|  | void              HAL_RTCEx_RTCEventCallback(RTC_HandleTypeDef *hrtc); | ||
|  | void              HAL_RTCEx_RTCEventErrorCallback(RTC_HandleTypeDef *hrtc); | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  |    | ||
|  | /* Extension Control functions ************************************************/ | ||
|  | /** @addtogroup RTCEx_Exported_Functions_Group3
 | ||
|  |   * @{ | ||
|  |   */ | ||
|  | void              HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); | ||
|  | uint32_t          HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); | ||
|  | 
 | ||
|  | HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  |    | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */  | ||
|  | 
 | ||
|  | /**
 | ||
|  |   * @} | ||
|  |   */ | ||
|  | 
 | ||
|  | #ifdef __cplusplus
 | ||
|  | } | ||
|  | #endif
 | ||
|  | 
 | ||
|  | #endif /* __STM32F1xx_HAL_RTC_EX_H */
 | ||
|  | 
 | ||
|  | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |